| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* After installation, SciTECO will therefore start into a more userfriendly mode
even if the user does not create a custom ~/.teco_ini.
It is hoped that this will scare away less of new users, who
are not willing to read through all of the documentation.
Still, users are warned in the absence of ~/.teco_ini.
This warning however, might not be immediately visible, especially
not when running gsciteco without an attached console.
(This will change once I redo the UI and allow a number of messages
to be queued in the message area.)
* Theoretically, you could also just extend fallback.teco_ini from ~/.teco_ini,
but that would require installing it into $SCITECOPATH.
* Since the fallback profile will now be munged automatically
on a wide range of systems, we set up xclip only when detecting X11
($DISPLAY is non-empty).
E.g. when running under Wayland or the Linux console, you still won't
get the clipboard registers, which is probably better than having the
clipboard operations fail once you try to use them.
* xclip is now "suggested" on Debian/Ubuntu.
Unfortunately we cannot pull it in only in the presence of X11.
|
|
* They are used at runtime only by the GTK port.
* Their existence can cause problems if OS-specific build systems
have to clean these files from the staging directory afterwards.
This was the case on FreeBSD where the committer refused to remove
these files after installation.
In the official FreeBSD port, we therefore currently ship the
PNG icons unnecessarily.
* They are now installed and shipped only on GTK builds.
|
|
* This is also the base of $SCITECOPATH.
* Changing it is useful for packaging where it is not possible to factor out the common
files between Curses and Gtk builds into a "sciteco-common" package.
As an alternative, you can now create disjunct sciteco-curses and sciteco-gtk packages.
* You will most likely want to use this for Gtk builds as in:
--with-interface=gtk --program-prefix=g --with-scitecodatadir=/usr/local/share/gsciteco.
|
|
* mingw-bundledlls finds and copies transitive DLL dependencies.
* Like all external one-file sources, mingw-bundledlls has been copied into contrib/
instead of adding a submodule.
It's taken from here: https://github.com/mpreisler/mingw-bundledlls
* Packaging is more robust now if dependant DLLs are upgraded or if we
decide to link in more statically.
With the old scheme, we might also miss some DLL and break builds
without even noticing it.
|
|
* fixed some Debian lintian warnings
|
|
* Previous Scintilla version was 3.6.4 and Scinterm was 1.7 (with lots of custom patches).
All of the patches are now either irrelevant or have been merged upstream.
* Since Scintilla 5 requires C++17, this increases the minimum GCC version at least
to 5.0. We may actually require even newer versions.
* I could not upgrade the scintilla-mirror (which was imported from Mercurial),
so the old sciteco-dev branch was renamed to sciteco-dev-pre-v2.0.0,
master was deleted and I reimported the entire Scintilla repo using
git-remote-hg.
This means that scintilla-mirror now contains two entirely separate trees.
But it is still possible to clone old SciTECO repos.
* The strategy/workflow of maintaining hotfix branches on scintilla-mirror has been changed.
Instead of having one sciteco-dev branch that is rebased onto new Scintilla upstream
releases and tagging SciTECO releases in scintilla-mirror (to keep the commits referenced),
we now create a branch for every Scintilla version we are based on (eg. sciteco-rel-5-1-3).
This branch is never rebased or deleted. Therefore, we are guaranteed to be able to
clone arbitrary SciTECO repo commits - not only releases.
Releases no longer have to be tagged in scintilla-mirror.
On the downside, fixup commits may accumulate in these new branches.
They can only be squashed once a new branch for a new Scintilla release is created
(e.g. by cherry-picking followed by rebase).
* Scinterm does no longer have to reside in the Scintilla subdirectory,
so we added it as a regular submodule.
There are no more recursive submodules.
The Scinterm build system has not been improved at all, but we use
a trick based on VPATH to build Scinterm in scintilla/bin/.
* Scinterm is now in Git and we reference the upstream repo for the
time being.
We might mirror it and apply the same branching workflow as with Scintilla
if necessary.
The scinterm-mirror repository still exists but has not been touched.
We will also have to rewrite its master branch as it was a non-reproducible
Mercurial import.
* Scinterm now also comes with patches for Scintilla which we simply applied
on our sciteco-rel-5-1-3 branch.
* Scintilla 5 outsourced its lexers into the Lexilla project.
We added it as yet another submodule.
* All submodules have been moved into contrib/.
* The Scintilla API for setting lexers has consequently changed.
We now have to call SCI_SETILEXER(0, CreateLexer(name)).
As I did not want to introduce a separate command for setting lexers,
<ES> has been extended to allow setting lexers by name with the SCI_SETILEXER
message which effectively replaces SCI_SETLEXERLANGUAGE.
* The lexer macros (SCLEX_...) no longer serve any purpose - they weren't used
in the SciTECO standard library anyway - and have consequently been removed
from symbols-scilexer.c.
The style macros from SciLexer.h (SCE_...) are theoretically still useful - even
though they are not used by our current color schemes - and have therefore been
retained. They can be specified as wParam in <ES>.
* <ES> no longer allows symbolic constants for lParam.
This never made any sense since all supported symbols were always wParam.
* Scinterm supports new native cursor modes.
They are not used for the time being and the previous CARETSTYLE_BLOCK_AFTER
caret style is configured by default.
It makes no sense to enable native cursor modes now since the
command line should have a native cursor but is not yet a Scintilla view.
* The Scintilla upgrade performed much worse than before,
so some optimizations will be necessary.
|
|
* We don't need the PNG icons on Windows as the compiled-in ICO should suffice
* Ship the dependencies of the SVG pixbuf loader.
* The PNG pixbuf loader is still distributed, as we at least need it
for loading the icon theme.
* Install a loaders.cache - without it, the pixbuf loaders won't be found.
This file can be generated by gdk-pixbuf-query-loaders but apparently has
to be modified by hand.
* Regenerate the icon cache using gtk-update-icon-cache.
* Icon themes are found now.
Unfortunately, we have to distribute the entire Adwaita icon theme
as distributing only the scalable (SVG) icons does not work for some
strange reason (FIXME).
|
|
don't build an empty libdlmalloc
* on some platforms (eg. Darwin/mac OS) we cannot apparently build empty
convenience libraries
* instead, we use conditional subdirectories and a conditional library dependency
|
|
This is a total conversion of SciTECO to plain C (GNU C11).
The chance was taken to improve a lot of internal datastructures,
fix fundamental bugs and lay the foundations of future features.
The GTK user interface is now in an useable state!
All changes have been squashed together.
The language itself has almost not changed at all, except for:
* Detection of string terminators (usually Escape) now takes
the string building characters into account.
A string is only terminated outside of string building characters.
In other words, you can now for instance write
I^EQ[Hello$world]$
This removes one of the last bits of shellisms which is out of
place in SciTECO where no tokenization/lexing is performed.
Consequently, the current termination character can also be
escaped using ^Q/^R.
This is used by auto completions to make sure that strings
are inserted verbatim and without unwanted sideeffects.
* All strings can now safely contain null-characters
(see also: 8-bit cleanliness).
The null-character itself (^@) is not (yet) a valid SciTECO
command, though.
An incomplete list of changes:
* We got rid of the BSD headers for RB trees and lists/queues.
The problem with them was that they used a form of metaprogramming
only to gain a bit of type safety. It also resulted in less
readble code. This was a C++ desease.
The new code avoids metaprogramming only to gain type safety.
The BSD tree.h has been replaced by rb3ptr by Jens Stimpfle
(https://github.com/jstimpfle/rb3ptr).
This implementation is also more memory efficient than BSD's.
The BSD list.h and queue.h has been replaced with a custom
src/list.h.
* Fixed crashes, performance issues and compatibility issues with
the Gtk 3 User Interface.
It is now more or less ready for general use.
The GDK lock is no longer used to avoid using deprecated functions.
On the downside, the new implementation (driving the Gtk event loop
stepwise) is even slower than the old one.
A few glitches remain (see TODO), but it is hoped that they will
be resolved by the Scintilla update which will be performed soon.
* A lot of program units have been split up, so they are shorter
and easier to maintain: core-commands.c, qreg-commands.c,
goto-commands.c, file-utils.h.
* Parser states are simply structs of callbacks now.
They still use a kind of polymorphy using a preprocessor trick.
TECO_DEFINE_STATE() takes an initializer list that will be
merged with the default list of field initializers.
To "subclass" states, you can simply define new macros that add
initializers to existing macros.
* Parsers no longer have a "transitions" table but the input_cb()
may use switch-case statements.
There are also teco_machine_main_transition_t now which can
be used to implement simple transitions. Additionally, you
can specify functions to execute during transitions.
This largely avoids long switch-case-statements.
* Parsers are embeddable/reusable now, at least in parse-only mode.
This does not currently bring any advantages but may later
be used to write a Scintilla lexer for TECO syntax highlighting.
Once parsers are fully embeddable, it will also be possible
to run TECO macros in a kind of coroutine which would allow
them to process string arguments in real time.
* undo.[ch] still uses metaprogramming extensively but via
the C preprocessor of course. On the downside, most undo
token generators must be initiated explicitly (theoretically
we could have used embedded functions / trampolines to
instantiate automatically but this has turned out to be
dangereous).
There is a TECO_DEFINE_UNDO_CALL() to generate closures for
arbitrary functions now (ie. to call an arbitrary function
at undo-time). This simplified a lot of code and is much
shorter than manually pushing undo tokens in many cases.
* Instead of the ridiculous C++ Curiously Recurring Template
Pattern to achieve static polymorphy for user interface
implementations, we now simply declare all functions to
implement in interface.h and link in the implementations.
This is possible since we no longer hace to define
interface subclasses (all state is static variables in
the interface's *.c files).
* Headers are now significantly shorter than in C++ since
we can often hide more of our "class" implementations.
* Memory counting is based on dlmalloc for most platforms now.
Unfortunately, there is no malloc implementation that
provides an efficient constant-time memory counter that
is guaranteed to decrease when freeing memory.
But since we use a defined malloc implementation now,
malloc_usable_size() can be used safely for tracking memory use.
malloc() replacement is very tricky on Windows, so we
use a poll thread on Windows. This can also be enabled
on other supported platforms using --disable-malloc-replacement.
All in all, I'm still not pleased with the state of memory
limiting. It is a mess.
* Error handling uses GError now. This has the advantage that
the GError codes can be reused once we support error catching
in the SciTECO language.
* Added a few more test suite cases.
* Haiku is no longer supported as builds are instable and
I did not manage to debug them - quite possibly Haiku bugs
were responsible.
* Glib v2.44 or later are now required.
The GTK UI requires Gtk+ v3.12 or later now.
The GtkFlowBox fallback and sciteco-wrapper workaround are
no longer required.
* We now extensively use the GCC/Clang-specific g_auto
feature (automatic deallocations when leaving the current
code block).
* Updated copyright to 2021.
SciTECO has been in continuous development, even though there
have been no commits since 2018.
* Since these changes are so significant, the target release has
been set to v2.0.
It is planned that beginning with v3.0, the language will be
kept stable.
|
|
* especially to improve building on FreeBSD 11
* We need GNU Make, yet alone because Scintilla/Scinterm
needs it. We now document that dependency and added
an Autoconf check from the autoconf-archive.
We make sure that the build process is invoked with GNU make
by generating only GNUmakefiles.
The Makefile.am files have not been renamed, so this
change can be rolled back easily.
* Some GNU-Make-specific autoreconf warnings have still been
resolved. But not all of them, as this would have been
unelegant and we need GNU Make anyway.
* Declare ACLOCAL_AMFLAGS to appease autoreconf
* Added an explicit check for C++11 from the autoconf-archives.
In general we should support building with every C++11 compiler
that is sufficiently GNU-like.
* Do not use `sed` for inplace editing, as different sed-implementations
have mutually incompatible syntax for this.
Instead of declaring and checking a dependency on GNU sed,
we simply use SciTECO for the editing task.
This improves code portability on BSDs.
* Similarily, BSD/POSIX `cmp` is supported now.
This fixes the test suite on BSD without declaring a
dependency on the GNU coreutils.
* Simplified sciteco-wrapper generation.
|
|
* Autotest ships with Autoconf, so it's available already
and relatively easy to integrate into an Autotools package.
* This is attached to `make check` using some Automake magic.
* The test suite will only call the built SciTECO for the time being.
But using tests/Makefile.am, custom programs could be easily
built.
* Since it uses the target sciteco, it cannot work in cross-compile
environments.
* The test suite tests/testsuite.at should be used for regression
tests at least: Whenever there is a bug, a test case should be
added to testsuite.at.
Later this might be split up into multiple includes for regressions
other tests.
|
|
* the GTK UI uses the first three resolutions for setting the
window icon.
* the 256px version will currently not be installed.
It may however be used later when packaging for Ubuntu.
|
|
* it is installed into the package's data dir.
It is always installed, even for Curses builds.
This means when packaging for Debian, the icon could
be part of the "sciteco-common" package.
If there will ever be more GTK-specific files that
need to be installed, this will probably change and
the icon will be installed for GTK builds only and
become part of the "sciteco-gtk" Debian package.
* if the icon could not be loaded, we fail silently.
* will not work with windows builds. On Windows, we
should just use the icon resource linked into the binary
rather than loading the image from file.
|
|
* Automake was trying to overwrite the submodule Scintilla
(that should be distributed) with the local copy of Scintilla
(perhaps because the directory had the same name).
Instead, we now copy the submodule Scintilla manually into
the distribution directory.
|
|
|
|
$SCITECOPATH on Windows
* $SCITECOCONFIG has been introduced, so have a macro-accessible location
for the profile, buffer session etc.
This is set to the program dir on Windows. That way, the config files
will be found, regardless of the current working dir, but it may also
be set up for Unix-like environments on Windows.
* $SCITECOPATH defaults to the program dir + "/lib" now on Windows.
* The default profile is now always called ".teco_ini". Also on Windows.
Platform differences like this would need to be documented.
* The sample teco.ini has been renamed to "sample.teco_ini" for clarity
|
|
this should simplify building SciTECO for new users
* compiler and archiver are passed down from Autoconf,
so cross-compiling should work transparently
* `make clean` will also clean the Scintilla source tree
* there is no longer any need for "source bundles" as
tar balls also contain Scintilla/Scinterm now
* building from Git is not much more difficult than building
from a tar ball
* The versions of Scintilla/Scinterm embedded as submodules
already contain all the patches necessary (currently none are
necessary), so there's no need to have patch files in the
repository
* INSTALL instructions have been rewritten
* the --with-scintilla and --with-scinterm site-config options
have been kept. But they should be rarely necessary now.
|
|
* allows us to remove most patches. One however is still necessary
(Scinterm Makefile bug!)
* TECO-style control code echoing is now set up using the SCI_SETREPRESENTATION message
* updated copyrights
* updated TODO
|
|
* MinGW binaries are built from source bundles
* patches are applied to the source bundle
* so all necessary patches must be in the repository and distributed
* use a leading number in patch names to ensure proper application order
|
|
|
|
* SCITECOPATH environment variable defaults to this directory
* manpage updated
* default teco.ini updated: no need to generate it anymore
|
|
into automake include (bootstrap.am)
|
|
later there will be much more documentation
|
|
terminal color definitions
* lexer config is now in separate file installed into the package data dir,
so it can be excluded from the teco.ini template.
* teco.ini is generated so it can load an installed lexer.tes as ED hook
(can still be dropped into the user's home and will work immediately)
|
|
allows including the currently chosen PREFIX
* also removed sciteco_datadir variable (pkgdatadir defined by Automake is sufficient)
|
|
language and commands will be described in separate documents
|
|
in the future, I might submit a more elaborate Scintilla patch for configuring
the control code strings.
|
|
also updated AUTHORS
|
|
|
|
|
