| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
special Q-registers ^Ax
* The unnamed buffer is also used for reading from --stdin, so you couldn't practically combine
--stdin with passing command-line arguments to macros.
* The old approach of passing command-line arguments via lines in the
unnamed buffer was flawed anyway as it wouldn't work with filenames containing LF.
This is just a very ancient feature, written when there weren't even long Q-reg names in SciTECO.
* You can now e.g. pipe into SciTECO and edit what was read interactively, e.g. `dmesg | sciteco -i`.
You can practically use SciTECO as a pager.
* htbl.tes is now a command-line filter (uses -qio).
* grosciteco.tes reads Troff intermediate code from stdin, so we no longer need
"*.intermediate" temporary files.
* added a getopt.tes test case to the testsuite.
* This change unfortunately breaks most macros accepting command-line arguments,
even if they used getopt.tes.
It also requires updating ~/.teco_ini - see fallback.teco_ini.
|
|
--stdin and --stdout options
* htbl.tes now reads from stdin and writes to stdout.
Allows avoiding temporary `*.htbl` files
* grosciteco.tes still cannot be simplified since --stdin cannot be combined with
passing command-line arguments (FIXME).
|
|
There will be a lot more commands for terminal/message
input and output soon.
|
|
compilation unit move-commands.c
* This made sense to include both `W` and `V`, so we also included `D` and `K`.
`^Q` is included since it converts between lines and glyphs.
* These are all single-letter commands, so they aren't complete parser states
but callbacks to be referenced in teco_machine_main_transition_t.
|
|
* this works by embedding the SciTECO parser and driving it always (exclusively)
in parse-only mode.
* A new teco_state_t::style determines the Scintilla style for any character
accepted in the given state.
* Therefore, the SciTECO lexer is always 100% exact and corresponds to the current
SciTECO grammer - it does not have to be maintained separately.
There are a few exceptions and tweaks, though.
* The contents of curly-brace escapes (`@^Uq{...}`) are rendered as ordinary
code using a separate parser instance.
This can be disabled with the lexer.sciteco.macrodef property.
Unfortunately, SciTECO does not currently allow setting lexer properties (FIXME).
* Labels and comments are currently styled the same.
This could change in the future once we introduce real comments.
* Lexers are usually implemented in C++, but I did not want to draw in C++.
Especially not since we'd have to include parser.h and other SciTECO headers,
that really do not want to keep C++-compatible.
Instead, the lexer is implemented "in the container".
@ES/SCI_SETILEXER/sciteco/ is internally translated to SCI_SETILEXER(NULL)
and we get Scintilla notifications when styling the view becomes necessary.
This is then centrally forwarded to the teco_lexer_style() which
uses the ordinary teco_view_ssm() API for styling.
* Once the command line becomes a Scintilla view even on Curses,
we can enabled syntax highlighting of the command line macro.
|
|
* should also fix Win32 nightly builds
* Even though we weren't using main's argv, but were using glib
API for retrieving the command line in UTF-8, newer MinGW runtimes
would fail when converting the Unicode command line into the system codepage
would be lossy.
* Most people seem to compile in a "manifest" to work around this issue.
But this requires newer Windows versions and using some Microsoft tool which isn't
even in $PATH.
Instead, we now link with -municode and define wmain() instead, even though we still
ignore argv. wmain() proabably get's the command line in UTF-16 and we'd have to
convert it anyway.
* See https://github.com/msys2/MINGW-packages/issues/22462
|
|
* significantly speeds up build time
* Scintilla and Lexilla headers and symbols are all-ASCII anyway.
* We should probably have a look at the quicksort implementation
in string.tes, as it can probably be optimized in UTF-8 documents as well.
|
|
* You no longer have to copy contrib/scintilla, contrib/scinterm and contrib/lexilla
manually to the build directory.
* It turns out, that Scintilla/Lexilla was supporting this since 2016.
Scintilla allows pointing to a source directory (srdir) and Lexilla to a binary directory (DIR_O).
* For Scinterm I opened a pull request in order to add srcdir/basedir variables:
https://github.com/orbitalquark/scinterm/pull/21
* `make distcheck` is therefore now also fixed.
* The FreeBSD package is now allowed to build out of source.
I haven't tested it yet.
* See also https://github.com/ScintillaOrg/lexilla/issues/266
|
|
* Useful for packaging on platforms where we can only build from tarballs (FreeBSD)
* I don't know whether it's always safe and correct to install this file into $DATADIR/applications,
so the file is only distributed but not installed yet.
* It contains a hardcoded binary name "gsciteco". This could actually differ
depending on the concrete --program-prefix and it would be good to include the exact
installation path.
This however is not possible as long as we do not install this file.
|
|
* This does not make sense for most SciTECO builds, but only when you
want to optimize for size as the lexers take up 50% of the compressed binary
size.
Without Lexilla, it should be possible get it compiled in about 500kb.
* It can be useful for instance when building for embedded distributions.
* When Lexilla is disabled, symbols-scilexer.c is also not generated
(we assume that the Lexilla sources are not available and it also doesn't serve any purpose).
* Consequently, most of the lexer configuration scripts are also not installed
under --without-lexilla.
|
|
decrease the binary size significantly
* -rdynamic was added to make sure that malloc replacement functions were exported and visible to shared libraries.
It was more or less currently only used on Linux and Haiku as Win32 and Mac OS do not override malloc.
* The option however exported all symbols which would prevent them to be removed at link-time.
Other optimizations could also be affected, perhaps resulting in less inlining.
* On Haiku, -rdynamic is not supported and cause build failures.
* It has been tested (nm -D ./sciteco | grep ' T ') that malloc() and friends are exported even when linking with -O3.
Even the __attribute__((used)) has been shown to be superfluous, but we keep it anyway just to be sure.
|
|
* Previous Scintilla version was 3.6.4 and Scinterm was 1.7 (with lots of custom patches).
All of the patches are now either irrelevant or have been merged upstream.
* Since Scintilla 5 requires C++17, this increases the minimum GCC version at least
to 5.0. We may actually require even newer versions.
* I could not upgrade the scintilla-mirror (which was imported from Mercurial),
so the old sciteco-dev branch was renamed to sciteco-dev-pre-v2.0.0,
master was deleted and I reimported the entire Scintilla repo using
git-remote-hg.
This means that scintilla-mirror now contains two entirely separate trees.
But it is still possible to clone old SciTECO repos.
* The strategy/workflow of maintaining hotfix branches on scintilla-mirror has been changed.
Instead of having one sciteco-dev branch that is rebased onto new Scintilla upstream
releases and tagging SciTECO releases in scintilla-mirror (to keep the commits referenced),
we now create a branch for every Scintilla version we are based on (eg. sciteco-rel-5-1-3).
This branch is never rebased or deleted. Therefore, we are guaranteed to be able to
clone arbitrary SciTECO repo commits - not only releases.
Releases no longer have to be tagged in scintilla-mirror.
On the downside, fixup commits may accumulate in these new branches.
They can only be squashed once a new branch for a new Scintilla release is created
(e.g. by cherry-picking followed by rebase).
* Scinterm does no longer have to reside in the Scintilla subdirectory,
so we added it as a regular submodule.
There are no more recursive submodules.
The Scinterm build system has not been improved at all, but we use
a trick based on VPATH to build Scinterm in scintilla/bin/.
* Scinterm is now in Git and we reference the upstream repo for the
time being.
We might mirror it and apply the same branching workflow as with Scintilla
if necessary.
The scinterm-mirror repository still exists but has not been touched.
We will also have to rewrite its master branch as it was a non-reproducible
Mercurial import.
* Scinterm now also comes with patches for Scintilla which we simply applied
on our sciteco-rel-5-1-3 branch.
* Scintilla 5 outsourced its lexers into the Lexilla project.
We added it as yet another submodule.
* All submodules have been moved into contrib/.
* The Scintilla API for setting lexers has consequently changed.
We now have to call SCI_SETILEXER(0, CreateLexer(name)).
As I did not want to introduce a separate command for setting lexers,
<ES> has been extended to allow setting lexers by name with the SCI_SETILEXER
message which effectively replaces SCI_SETLEXERLANGUAGE.
* The lexer macros (SCLEX_...) no longer serve any purpose - they weren't used
in the SciTECO standard library anyway - and have consequently been removed
from symbols-scilexer.c.
The style macros from SciLexer.h (SCE_...) are theoretically still useful - even
though they are not used by our current color schemes - and have therefore been
retained. They can be specified as wParam in <ES>.
* <ES> no longer allows symbolic constants for lParam.
This never made any sense since all supported symbols were always wParam.
* Scinterm supports new native cursor modes.
They are not used for the time being and the previous CARETSTYLE_BLOCK_AFTER
caret style is configured by default.
It makes no sense to enable native cursor modes now since the
command line should have a native cursor but is not yet a Scintilla view.
* The Scintilla upgrade performed much worse than before,
so some optimizations will be necessary.
|
|
* this flag could negatively affect optimizations
* fixes builds on MinGW
|
|
don't build an empty libdlmalloc
* on some platforms (eg. Darwin/mac OS) we cannot apparently build empty
convenience libraries
* instead, we use conditional subdirectories and a conditional library dependency
|
|
file systems
* There is a "Scintilla.h" as well.
* should fix macOS and builds on native Windows hosts
* It wasn't practical to refer to the Scintilla includes using paths since
the Scintilla location is configurable (--with-scintilla).
So we'd have to write something like #include <include/Scintilla.h>.
For Scinterm we cannot avoid collisions neither as its path is also
configurable (--with-scinterm).
Effectively, we must prevent name clashes across SciTECO and all
of Scintilla and Scinterm.
|
|
This is a total conversion of SciTECO to plain C (GNU C11).
The chance was taken to improve a lot of internal datastructures,
fix fundamental bugs and lay the foundations of future features.
The GTK user interface is now in an useable state!
All changes have been squashed together.
The language itself has almost not changed at all, except for:
* Detection of string terminators (usually Escape) now takes
the string building characters into account.
A string is only terminated outside of string building characters.
In other words, you can now for instance write
I^EQ[Hello$world]$
This removes one of the last bits of shellisms which is out of
place in SciTECO where no tokenization/lexing is performed.
Consequently, the current termination character can also be
escaped using ^Q/^R.
This is used by auto completions to make sure that strings
are inserted verbatim and without unwanted sideeffects.
* All strings can now safely contain null-characters
(see also: 8-bit cleanliness).
The null-character itself (^@) is not (yet) a valid SciTECO
command, though.
An incomplete list of changes:
* We got rid of the BSD headers for RB trees and lists/queues.
The problem with them was that they used a form of metaprogramming
only to gain a bit of type safety. It also resulted in less
readble code. This was a C++ desease.
The new code avoids metaprogramming only to gain type safety.
The BSD tree.h has been replaced by rb3ptr by Jens Stimpfle
(https://github.com/jstimpfle/rb3ptr).
This implementation is also more memory efficient than BSD's.
The BSD list.h and queue.h has been replaced with a custom
src/list.h.
* Fixed crashes, performance issues and compatibility issues with
the Gtk 3 User Interface.
It is now more or less ready for general use.
The GDK lock is no longer used to avoid using deprecated functions.
On the downside, the new implementation (driving the Gtk event loop
stepwise) is even slower than the old one.
A few glitches remain (see TODO), but it is hoped that they will
be resolved by the Scintilla update which will be performed soon.
* A lot of program units have been split up, so they are shorter
and easier to maintain: core-commands.c, qreg-commands.c,
goto-commands.c, file-utils.h.
* Parser states are simply structs of callbacks now.
They still use a kind of polymorphy using a preprocessor trick.
TECO_DEFINE_STATE() takes an initializer list that will be
merged with the default list of field initializers.
To "subclass" states, you can simply define new macros that add
initializers to existing macros.
* Parsers no longer have a "transitions" table but the input_cb()
may use switch-case statements.
There are also teco_machine_main_transition_t now which can
be used to implement simple transitions. Additionally, you
can specify functions to execute during transitions.
This largely avoids long switch-case-statements.
* Parsers are embeddable/reusable now, at least in parse-only mode.
This does not currently bring any advantages but may later
be used to write a Scintilla lexer for TECO syntax highlighting.
Once parsers are fully embeddable, it will also be possible
to run TECO macros in a kind of coroutine which would allow
them to process string arguments in real time.
* undo.[ch] still uses metaprogramming extensively but via
the C preprocessor of course. On the downside, most undo
token generators must be initiated explicitly (theoretically
we could have used embedded functions / trampolines to
instantiate automatically but this has turned out to be
dangereous).
There is a TECO_DEFINE_UNDO_CALL() to generate closures for
arbitrary functions now (ie. to call an arbitrary function
at undo-time). This simplified a lot of code and is much
shorter than manually pushing undo tokens in many cases.
* Instead of the ridiculous C++ Curiously Recurring Template
Pattern to achieve static polymorphy for user interface
implementations, we now simply declare all functions to
implement in interface.h and link in the implementations.
This is possible since we no longer hace to define
interface subclasses (all state is static variables in
the interface's *.c files).
* Headers are now significantly shorter than in C++ since
we can often hide more of our "class" implementations.
* Memory counting is based on dlmalloc for most platforms now.
Unfortunately, there is no malloc implementation that
provides an efficient constant-time memory counter that
is guaranteed to decrease when freeing memory.
But since we use a defined malloc implementation now,
malloc_usable_size() can be used safely for tracking memory use.
malloc() replacement is very tricky on Windows, so we
use a poll thread on Windows. This can also be enabled
on other supported platforms using --disable-malloc-replacement.
All in all, I'm still not pleased with the state of memory
limiting. It is a mess.
* Error handling uses GError now. This has the advantage that
the GError codes can be reused once we support error catching
in the SciTECO language.
* Added a few more test suite cases.
* Haiku is no longer supported as builds are instable and
I did not manage to debug them - quite possibly Haiku bugs
were responsible.
* Glib v2.44 or later are now required.
The GTK UI requires Gtk+ v3.12 or later now.
The GtkFlowBox fallback and sciteco-wrapper workaround are
no longer required.
* We now extensively use the GCC/Clang-specific g_auto
feature (automatic deallocations when leaving the current
code block).
* Updated copyright to 2021.
SciTECO has been in continuous development, even though there
have been no commits since 2018.
* Since these changes are so significant, the target release has
been set to v2.0.
It is planned that beginning with v3.0, the language will be
kept stable.
|
|
Automakefiles could be simplified by updating CXXFLAGS
in configure.ac instead.
|
|
been shown to be unacceptably broken, so the fallback implementation has been improved
* mallinfo() is not only broken on 64-bit systems but slows things
down linearilly to the memory size of the process.
E.g. after 500000<%A>, SciTECO will act sluggish! Shutting down
afterwards can take minutes...
mallinfo() was thus finally discarded as a memory measurement
technique.
* Evaluating /proc/self/statm? has also been evaluated and discarded
because doing this frequently is even slower.
* Instead, the fallback implementation has been drastically improved:
* If possible use C++14 global sized deallocators, allowing memory measurements
across the entire C++ code base with minimal runtime overhead.
Since we only depend on C++11, a lengthy Autoconf check had to be introduced.
* Use malloc_usable_size() with global non-sized deallocators to
measure the approx. memory usage of the entire process (at least
the ones done via C++).
The cheaper C++11 sized deallocators implemented via SciTECO::Object still
have precedence, so this affects Scintilla code only.
* With both improvements the test case
sciteco -e '<@EU[X^E\a]"^E\a"%a>'
is handled sufficiently well now on glibc and performance is much better
now.
* The jemalloc-specific technique has been removed since it no longer
brings any benefits compared to the improved fallback technique.
Even the case of using malloc_usable_size() in strict C++ mode is
up to 3 times faster.
* The new fallback implementation might actually be good enough for
Windows as well if some MSVCRT-specific support is added, like
using _msize() instead of malloc_usable_size().
This must be tested and benchmarked, so we keep the Windows-specific
implementation for the time being.
|
|
* especially to improve building on FreeBSD 11
* We need GNU Make, yet alone because Scintilla/Scinterm
needs it. We now document that dependency and added
an Autoconf check from the autoconf-archive.
We make sure that the build process is invoked with GNU make
by generating only GNUmakefiles.
The Makefile.am files have not been renamed, so this
change can be rolled back easily.
* Some GNU-Make-specific autoreconf warnings have still been
resolved. But not all of them, as this would have been
unelegant and we need GNU Make anyway.
* Declare ACLOCAL_AMFLAGS to appease autoreconf
* Added an explicit check for C++11 from the autoconf-archives.
In general we should support building with every C++11 compiler
that is sufficiently GNU-like.
* Do not use `sed` for inplace editing, as different sed-implementations
have mutually incompatible syntax for this.
Instead of declaring and checking a dependency on GNU sed,
we simply use SciTECO for the editing task.
This improves code portability on BSDs.
* Similarily, BSD/POSIX `cmp` is supported now.
This fixes the test suite on BSD without declaring a
dependency on the GNU coreutils.
* Simplified sciteco-wrapper generation.
|
|
* we were basing the glib allocators on throwing std::bad_alloc just like
the C++ operators. However, this always was unsafe since we were throwing
exceptions across plain-C frames (Glib).
Also, the memory vtable has been deprecated in Glib, resulting in
ugly warnings.
* Instead, we now let the C++ new/delete operators work like Glib
by basing them on g_malloc/g_slice.
This means they will assert and the application will terminate
abnormally in case of OOM. OOMs cannot be handled properly anyway, so it is
more important to have a good memory limiting mechanism.
* Memory limiting has been completely revised.
Instead of approximating undo stack sizes using virtual methods
(which is unprecise and comes with a performance penalty),
we now use a common base class SciTECO::Object to count the memory
required by all objects allocated within SciTECO.
This is less precise than using global replacement new/deletes
which would allow us to control allocations in all C++ code including
Scintilla, but they are only supported as of C++14 (GCC 5) and adding compile-time
checks would be cumbersome.
In any case, we're missing Glib allocations (esp. strings).
* As a platform-specific extension, on Linux/glibc we use mallinfo()
to count the exact memory usage of the process.
On Windows, we use GetProcessMemoryInfo() -- the latter implementation
is currently UNTESTED.
* We use g_malloc() for new/delete operators when there is
malloc_trim() since g_slice does not free heap chunks properly
(probably does its own mmap()ing), rendering malloc_trim() ineffective.
We've also benchmarked g_slice on Linux/glib (malloc_trim() shouldn't
be available elsewhere) and found that it brings no significant
performance benefit.
On all other platforms, we use g_slice since it is assumed
that it at least does not hurt.
The new g_slice based allocators should be tested on MSVCRT
since I assume that they bring a significant performance benefit
on Windows.
* Memory limiting does now work in batch mode as well and is still
enabled by default.
* The old UndoTokenWithSize CRTP hack could be removed.
UndoStack operations should be a bit faster now.
But on the other hand, there will be an overhead due to repeated
memory limit checking on every processed character.
|
|
* this uses an optstring compatible with getopt(3).
* It does not use repeated getopt calls to iterate options, though
but places the results in registers beginning with "getopt.".
E.g. option "C" will result in "getopt.C" being set after the
call to setopt.
String arguments are supported and are placed in the string part
of the getopt registers.
* The grosciteco.tes and symbols-extract.tes scripts make use of
getopt now, to simplify and clean up their command line handling.
|
|
* it turns out that option-like arguments could not be reliably passed to
SciTECO scripts for two reasons:
a) "--" arguments are not removed from argv by GOption if it detects
and following option-like argument.
"--" would thus be passed as a script argument which will disable
option parsing in scripts that interpret "--".
b) A script run via the Hash-Bang line "#!...sciteco -m" would
require an explicit "--" to turn of GOption parsing.
However it is __impossible__ to insert after the script file name
on UNIX.
* Therefore, SciTECO now removes leading "--" arguments left over by GOption.
* If possible (Glib >= 2.44), option parsing is performed in strict POSIX
mode which inhibits parsing after the first non-option argument.
This reduces the number of cases where an explicit "--" is required.
* --mung no longer takes an argument. Instead, the first non-option argument
is expected to be the script file name.
This looks weird at first but is more consistent with how other interpeters
work. Once we revise argument passing to scripts, the script name can also
be passed to the script which is more consistent with it being the first
non-option argument.
Also, with strict POSIX parsing, this fixed Hash-Bang lines since
the script file name constructed by the kernel will automatically switch
off option parsing, passing all option-like script arguments uninterpreted
to the script.
* Since we're supporting Glib < 2.44, the Hash-Bang lines are still broken
for certain builds.
Therefore, a wrapper script is installed to libexecdir (it never has to be
executed by users and Hash-Bang lines need absolute paths anyway) which
transparently inserts "--" into the SciTECO command line and should be used
as the interpreter in portable SciTECO scripts.
The wrapper script is generated and points to the exact SciTECO binary
installed. This is important when doing parallel installs of Curses and Gtk
binaries since each one will get its own working wrapper script.
The wrapper-script workaround can be removed once we depend on Glib >= 2.44
(some day...).
* The default /usr/bin/env Hash-Bang lines are no longer used in the
scripts since they are broken anyway (UNIX incl. Linux cannot pass
multiple arguments to the interpreter!).
Scripts that get installed will get a fixed-up Hash-Bang line referring
to the installed SciTECO binary anyway.
* Interface::main() has been renamed to Interface::init() and is optional
now. The Interface::main() method was introduced because of the misconception
that interfaces will find their options in the argv array and have to do
their own parsing.
This is wrong, since their option group already cares about parsing.
Therefore, gtk_init() does not have to called explicitly, too.
|
|
* the new "?" (help) command can be used to look up
help topics.
* help topics are index from $SCITECOPATH/women/*.woman.tec
files.
* looking up a help topic opens the corresponding "womanpage"
and jumps to the position of the topic (it acts like an anchor
into the document).
* styling is performed by *.woman.tec files.
* Setting up the Scintilla view and munging the *.tec file
is performed by the new "woman.tes" lexer.
On supporting UIs (Gtk), womanpages are shown in a variable-width
font.
* Woman pages are usually not hand-written, but generated from manpages.
A special Groff post-processor grosciteco has been introduced for this
purpose. It is much like grotty, but can output SciTECO macros for styling
the document (ie. the *.woman.tec files).
It is documented in its own man-page.
* grosciteco also introduces sciteco.tmac - special Troff macros
for controlling the formatting of the document in SciTECO.
It also defines .SCITECO_TOPIC which can be used to mark up
help topics/terms in Troff markup.
* Woman pages are generated/formatted by grosciteco at compile-time, so
they will work on platforms without Groff (ie. as on windows).
* Groff has been added as a hard compile-time requirement.
* The sciteco(1) and sciteco(7) man pages have been augmented with
help topic anchors.
|
|
* mapped to different registers beginning with "~"
* on supported platforms accessing the clipboard is as easy as
X~ or G~.
Naturally this also allows clipboards to be pasted in
string arguments/insertions (^EQ~).
* Currently, Gtk+, PDCurses and ncurses/XTerm are supported.
For XTerm clipboard support, users must set 0,256ED to enable
it since we cannot check for XTerm window ops programmatically
(at least without libX11).
* When clipboard regs exist, the clipboard can also be deemed functional.
This allows macros to fall back to xclip(1) if necessary.
* EOL handling has been moved into a new file eol.c and eol.h.
EOL translation no longer depends on GIOChannels but can be
memory-backed as well.
|
|
batch mode
* by using variadic templates, UndoStack::push() is now responsible
for allocating undo tokens. This is avoided in batch mode.
* The old UndoStack::push(UndoToken *) method has been made private
to avoid confusion around UndoStack's API.
The old UndoStack::push() no longer needs to handle !undo.enabled,
but at least asserts on it.
* C++11 support is now required, so variadic templates can be used.
This could have also been done using manual undo.enabled checks;
or using multiple versions of the template with different numbers
of template arguments.
The latter could be done if we one day have to support a non-C++11
compiler.
However since we're depending on GCC 4.4, variadic template use should
be OK.
Clang supports it since v2.9.
* Sometimes, undo token pushing passed ownership of some memory
to the undo token. The old behaviour was relied on to reclaim the
memory even in batch mode -- the undo token was always deleted.
To avoid leaks or repeated manual undo.enabled checking,
another method UndoStack::push_own() had to be
introduced that makes sure that an undo token is always created.
In batch mode (!undo.enabled), this will however create the object
on the stack which is much cheaper than using `new`.
* Having to know which kind of undo token is to be pushed (taking ownership
or not) is inconvenient. It may be better to add static methods to
the UndoToken classes that can take care of reclaiming memory.
* Benchmarking certain SciTECO scripts have shown 50% (!!!) speed increases
at the highest possible optimization level (-O3 -mtune=native -march=native).
|
|
* use libtool convenience libraries as much as possible
(for all static libraries except Scintilla)
* improves separation of language and user interface implementations
(e.g. the Gtk widgets are not interesting for the rest of SciTECO)
* the Curses popup widget can now be factored out of interface-curses.cpp
* some common CPPFLAGS are now defined by ./configure via AM_CPPFLAGS,
so they don't have to be repeated in each submodule.
* fixed building the Curses UI: GTK_FLOW_BOX_FALLBACK conditional
must always be defined.
|
|
* depend on Gtk+ 3.10. If necessary older versions should also
be supportable. GtkOverlay was already introduced in v3.2
* A fallback for GtkFlowBox is compiled in if the Gtk installation
is too old. This applies even to Ubuntu 14.04 which still runs
Gtk v3.10.
* the threading the Gtk UI is left as it is for the time being
even though the synchronization mechanism has been deprecated.
Alternative approaches have to be tried out and benchmarked.
* Completely revamped the GtkInfoPopup widget.
It is now as powerful as the Curses UI's popup widget.
* A GtkOverlay is used instead of the top-level window hack
in the Gtk2 version.
* GtkFlowBox is used to lay out the columns of the popup.
* I had to work around restrictions of GtkScrolledWindow
by writing my own poor-mans scrolled window which handles
size requests correctly.
* The popup window no longer overflows the screen size,
instead we scroll.
* Scrolling pagewise is finally supported. Wraps at the
end of a list just like the Curses UI.
* Instead of using only two stock icons, we now use
GIO to get file and directory icons for the current theme.
This looks even better.
* The GtkFlowBox allows selections which can be used for mouse
interaction later. But this is not yet implemented.
* Theming of the popup widget and command line is still
not performed correctly.
|
|
* it is installed into the package's data dir.
It is always installed, even for Curses builds.
This means when packaging for Debian, the icon could
be part of the "sciteco-common" package.
If there will ever be more GTK-specific files that
need to be installed, this will probably change and
the icon will be installed for GTK builds only and
become part of the "sciteco-gtk" Debian package.
* if the icon could not be loaded, we fail silently.
* will not work with windows builds. On Windows, we
should just use the icon resource linked into the binary
rather than loading the image from file.
|
|
* sciteco.ico contains a 16 color 16px, a 255 color 32px and
a true color 48px version of the icon.
The first ones are good for legacy Windows versions like 2000,
while the latter one should be preferred by Windows >= 7.
* Also added the 48px version as a PNG for Linux.
But it is not installed currently, as there is no standardized
place for it and it wouldn't do much good in /usr/share/sciteco.
|
|
* This adds the -all-static libtool option and can be used to
link a static sciteco binary (or at least link in as few as possible
dynamic libraries)
* Esp. useful on MinGW to link in all dependant libraries (glib, libintl,
libiconv, libpdcurses, ...) statically.
A static .exe is much smaller than a dynamically linked plus all the
DLLs and is easier to relocate.
* This does not guarantee that ALL libraries are linked in dynamically.
E.g. on MinGW, the sciteco.exe will still link to MSVCRT and the Windows
system DLLs, but they already ship with Windows.
* On MinGW, even a static build will still require the gspawn-win32-helper-console.exe
which is used by glib to implement g_spawn with redirection.
We cannot get around that.
* It would be better to let this be decided by the package builder using
the standard env variables like LDFLAGS. However, this does not seem to
work well with libtool. It IS possible to define LDFLAGS="-all-static" when
calling make but this approach sucks.
|
|
string-utils.cpp and string-utils.h
* also improved performance of String::append() by using g_realloc()
* added String::append() variant for non-null-terminated strings
|
|
$SCITECOPATH on Windows
* $SCITECOCONFIG has been introduced, so have a macro-accessible location
for the profile, buffer session etc.
This is set to the program dir on Windows. That way, the config files
will be found, regardless of the current working dir, but it may also
be set up for Unix-like environments on Windows.
* $SCITECOPATH defaults to the program dir + "/lib" now on Windows.
* The default profile is now always called ".teco_ini". Also on Windows.
Platform differences like this would need to be documented.
* The sample teco.ini has been renamed to "sample.teco_ini" for clarity
|
|
this will allow us to use the same algorithms for loading and saving
Q-Registers (from/to file).
* Saving with EW when a Q-Reg is edited has been fixed (was broken earlier)
* SciTECO save point files are now named .teco-X-BASENAME
When using IOView for Q-Regs, there will be no way to sensible count
the save points. Each write of a Q-Reg may be to another file.
Therefore, we number save-points globally.
If the sequence of writes has to be reconstructed manually,
one can still look at the save point files' modification dates
* give more informative error messages when saving a file fails
|
|
* implements the same globbing as the EB command already did
* uses Globber helper class that behaves more like UNIX glob().
glib only has a glob-style pattern matcher.
* The Globber class may be extended later to provide more
UNIX-like globbing.
* lexer.tes has been updated to make use of globbing.
Now, lexers can be automatically loaded and registered at
startup. To install a new lexer, it's sufficient to copy
a file to the lexers/ directory.
|
|
* does not change ./configure parameters
You still have to specifiy --with-interface=ncurses for
the Curses interface with default settings
* the "NCurses" UI was used for many different Curses
variants, so plain "Curses" is a better name.
|
|
The user interface provides a Scintilla view abstraction and
every buffer is based on a view. All Q-Register strings use
a single dedicated view to save memory and initialization time
when using many string registers.
* this means we can finally implement a working lexer configuration
and it only has to be done once when the buffer is first added
to the ring. It is unnecessary to magically restore the lexer
styles upon rubout of EB (very hard to implement anyway). It
is also not necessary to rerun the lexer configuration macro
upon rubout which would be hard to reconcile with SciTECO's
basic design since every side-effect should be attached to a
character.
* this means that opening buffers is slightly slower now
because of the view initialization
* on the other hand, macros with many string q-reg operations
are faster now, since the document must no longer be changed
on the buffer's view and restored later on.
* also now we can make a difference between editing a document
in a view and changing the current view, which reduces UI calls
* the Document class has been retained as an abstraction about
Scintilla documents, used by QRegister Strings.
It had to be made virtual, so the view on which the document
is created can be specified by a virtual function.
There is no additional space overhead for Documents.
|
|
* the GError expection has been renamed to GlibError, to avoid
nameclashes when working from the SciTECO namespace
|
|
powerful command for filtering a SciTECO buffer through an external
program. It will be described in the sciteco(7) man pages.
The implementation uses an asynchronous background process with
pipes but is platform independant thanks to glib's g_spawn functions,
GIOChannels and event loops.
There are however platform differences in how the operating system
command is interpreted/parsed.
|
|
|
|
this should simplify building SciTECO for new users
* compiler and archiver are passed down from Autoconf,
so cross-compiling should work transparently
* `make clean` will also clean the Scintilla source tree
* there is no longer any need for "source bundles" as
tar balls also contain Scintilla/Scinterm now
* building from Git is not much more difficult than building
from a tar ball
* The versions of Scintilla/Scinterm embedded as submodules
already contain all the patches necessary (currently none are
necessary), so there's no need to have patch files in the
repository
* INSTALL instructions have been rewritten
* the --with-scintilla and --with-scinterm site-config options
have been kept. But they should be rarely necessary now.
|
|
this was broken in #de616e362ccd56aae8b26a08d9520ab9132a060f
|
|
by building with Emscripten support, SciTECO may be
embedded into web pages.
* sciteco.html is not a piece of documentation but a sample SciTECO embedding
|
|
* there was a compile-time race condition that could result in the GObjects not being built (with Gob2).
So I removed the symbols generation from BUILT_SOURCES.
* apparently either Scintilla depends on gmodule since I last tested or the gtk+-2.0 pkg-config package
no longer includes gmodule, so we must explicitly depend on it
|
|
* fixes gcc-4.4 which does not have -Wno-mismatched-tags and no -Wunknown-warning
|
|
init_priority attribute
* we cannot use weak symbols in MinGW, so we avoid init_priority for symbol
initialization by compiling the empty definitions into
sciteco-minimal but the real ones into sciteco
(had to add new file symbols-minimal.cpp)
* this fixes compilation/linking on LLVM Clang AND Dragonegg
since their init_priority attribute is broken!
this will likely be fixed in the near future but broken versions
will be around for some time
|
|
* -Wmismatched-tags does not appear to exist on GCC:
but we need to be able to refer to classes with both struct and class keywords
because of the BSD data types
* -Wchar-subscripts exists on GCC and may or may not be in -Wall.
We disable it since we use character literals as subscripts - they are
actually of type char in C++, in contrast to C where they are of type
int.
|
|
useful for Windows where the desired default path does not correspond with
the installation dir of the std lib macros
|
|
...which is useful when crosscompiling for MinGW
|
|
* also encapsulates data properly (previously there were many public
attributes to avoid permission issues)
* new class also cares about saving/and restoring scroll state.
now, buffer/q-reg edits and temporary accesses do not reset
the scroll state anymore.
|
|
* pkg-config LIBS should be added to $LIBS so that link order is correct
|
