| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
|
|
* Previously you could open files of arbitrary size and the limit would be checked only afterwards.
* Many, but not all, cases should now be detected earlier.
Since Scintilla allocates lots of memory as part of rendering,
you can still run into memory limits even after successfully loading the file.
* Loading extremely large files can also be potentially slow.
Therefore, it is now possible to interrupt via CTRL+C.
Again, if the UI is blocking because of stuff done as part of rendering,
you still may not be able to interrupt the "blocking" operation.
|
|
* We now set opt.retain=false for the process, so jemalloc returns
freed memory and the RSS decreases when recovering from memory limit hits.
This should be safe at least on FreeBSD.
* Either the opt.retain option is new or I was previously testing
this only on 32-bit systems.
|
|
overflow checking
* teco_memory_usage is now an unsigned integer.
* Unfortunately we currently rely on the variable being int-sized since we use
atomic operations.
This means on 64-bit systems, limiting will not work as expected if you set the limit larger
than 4GB.
Not sure whether this should be fixed.
* Calling teco_memory_check() with a non-null request-size was totally broken and could
result in bogus failures.
This is currently used exclusively for checking backwards searches.
|
|
* Curses: "icons" have also been added
|
|
|
|
command line argument
* For instance, you can now rub out ^Q^W at the beginning of a string argument.
Otherwise, pressing Ctrl+W after ^Q^W would rub out only the ^W.
The next Ctrl+W would then insert ^W, due to special immediate editing inhibition after ^Q.
* This still only works if the string building construct expanded to at least one byte.
Suppose you have ^EQq, expanding to nothing, pressing Ctrl+W would chain to the default
teco_state_process_edit_cmd() and the entire command would be rubbed out.
This is probably tolerable.
|
|
* This allows you to type ^Q^U (which would otherwise rub out the entire argument)
and ^Q^W (which would otherwise rub out the ^Q).
* ^Q^U coincidentally worked previously since the teco_state_stringbuilding_escaped
state would default to teco_state_process_edit_cmd().
But it's better to make this feauture explicit.
* This finally makes it possible to insert the ^W (23) char into a buffer.
In interactive mode, you can still only type Caret+W as a string building construct.
* ^G could also be inhibited after ^Q, but the control char is not used anywhere yet,
so there is no point in doing that.
|
|
* The XTerm version is still checked if we detect running under XTerm.
* Actually, the XTerm implementation is broken for Unicode clipboard contents.
* Kitty supports OSC-52, but you __must__ enable read-clipboard.
With read-clipboard-ask, there will be a timeout.
But we cannot read without a timeout since otherwise we would hang indefinitely
if the escape sequence turns out to not work.
* For urxvt, I have hacked an existing extension:
https://gist.github.com/rhaberkorn/d7406420b69841ebbcab97548e38b37d
* st currently supports only setting the clipboard, but not querying it.
|
|
* This is especially important on platforms, requiring the wgetch()
poll workaround to detect CTRL+C (PDCurses/WinGUI).
wgetch(cmdline_window) would implicitly wrefresh(cmdline_window),
which resulted in additional flickering when pressing function keys.
This is no longer so important since key macros are processed
as an unity and the cmdline will be updated only after processing
all of the characters contained in them, ie. only once after the key press.
Still, there could have still been unwanted side effects.
At the very least, wgetch(input_pad) should be faster.
* The XTerm clipboard implementation was getch()ing on stdscr,
so potentially suffered from the same problem.
It should be tested again.
* Since keypad() is now always enabled even on netbsd-curses.
I assume that the function key processing bug in netbsd-curses
has been fixed by now. We are not building any releases with
netbsd-curses. But it should be retested.
* It does not resolve all flickering issues on PDCurses/WinGUI.
Both the command line and the Scintilla view still flicker near
the cursor. See
https://github.com/Bill-Gray/PDCursesMod/issues/322
|
|
* This is necessary to fix the Unicode test suite on Win32,
so I was always passing in --disable-shared manually.
It's easy to forget though when building from scratch.
* We don't currently install any (shared) library, so this is safe
on all platforms.
In fact on all other platforms, libtool detects that and doesn't
generate wrapper binaries in any way.
Only on win32 it's apparently buggy.
|
|
* Turns out that "%C" in wprintw() does not work with non-ANSI chars.
* We still don't want to introduce the Curses widechar API,
so I added teco_curses_add_wc() as a replacement for wadd_wch().
|
|
characters
* Some characters like LF wouldn't be displayed in the message line correctly.
* In fact the Gtk UI cannot display any of the control characters correctly.
* I was considering deferring all echoing/formatting to the UIs, so they can use
TecoGtkLabel or teco_curses_format_str().
This is not possible since messages transmitted via GError must not contain null-bytes,
so these need to be sorted out earlier anyway.
* This should also fix syntax errors in PDCurses for Windows where "%C" apparently doesn't
work with non-ANSI codepoints.
|
|
all expansions of ^EQq, ^EUq and so on
* Previously, there was no way to enter upper-case mode in interactive commands since
the Ctrl+W immediate editing command is interpreted everywhere.
* Without the case folding of ^EQq/^EUq results, the upper and lower case modes are actually pretty useless
considering that modern keyboards have caps lock.
So it was clear we need this, regardless of what the classic TECOs did.
The TECO-11 manual is not very clear on this.
tecoc apparently does not case-fold ^EQq results.
* This opens up new idioms, for instance
`EUq^W^W^EQq$` in order to upper case register q.
It's also the only way you can currently upper-case Unicode codepoints.
|
|
* Ctrl+^ (30) and Caret+caret (^^) were both translated to a single caret.
While there might be some reason to keep this behavior for double-caret,
it is certainly pointless for Ctrl+^.
* That gives you an easy way to insert Ctrl+^ (code 30) into documents with <I>.
Perviously, you either had to insert a double-caret, typing 4 carets in a row,
or you had to use <EI> or 30I$.
* The special handling of double-caret could perhaps be abolished altogether,
as we also have ^Q^ to escape plain carets.
The double-caret syntax is very archaic from the time that there was no proper
^Q as far as I recall correctly.
|
|
* @EQ$/.../ sets the current directory from the contents of the given file.
@E%$/.../ stores the currend directory in the given file.
* @EQ*/.../ will fail, just like ^U*...$.
@E%*/.../ stores the current buffer's name in the given file.
* It's especially useful with the clipboard registers.
There could still be a minor bug in @E%~/.../ with regard to EOL normalization
as teco_view_save() will use the EOL style of the current document, which
may not be the style of the Q-Reg contents.
Conversions can generally be avoided for these particular commands.
But without teco_view_save() we'd have to care about save point creation.
|
|
* This was unsafe and could easily result in crashes, since teco_qreg_current
would afterwards point to an already freed Q-Register.
* Since automatically editing another register or buffer is not easy to do right,
we throw an error instead.
|
|
This was throwing glib assertions.
|
|
* Unfortunately, the list in sciteco(7) does not format with FreeBSD's man or
within SciTECO.
* Removed references to the old sciteco.sf.net.
We don't have a proper "homepage" for the time being.
|
|
* Practically requires one of the "Nerd Font" fonts,
so it's disabled by default.
Add 0,512ED to the profile to enable them.
* The new ED flag could be used to control Gtk icons as well,
but they are left always-enabled for the time being.
Is there any reason anybody would like to disable icons in Gtk?
* The list of icons has been adapted and extended from exa:
https://github.com/ogham/exa/blob/master/src/output/icons.rs
* The icons are hardcoded as presorted lists,
so we can binary search them.
This could change in the future. If there is any demand,
they could be made configurable via Q-Registers as well.
|
|
Test case:
IF$ J IX$ FKF$ ^W
The range to delete is empty, Scintilla would not generate an undo action,
but SCI_UNDO would still be exected on rubout which removes the "X" too early.
* We should really get rid of Scintilla undo actions as they are a source of trouble
and complexity.
There could be a custom undo token to undo SCI_DELETERANGE that automatically
fetches the text that's going to be deleted and stores it in the token's data.
This could replace most uses of SCI_UNDO.
The rest is to undo insertions, which can easily be replaced with
undo__teco_interface_ssm(SCI_DELETERANGE...).
* We should really allow rubout tests in the test suite...
|
|
* if the buffer gap does not fall into the searched area,
the gap will no longer be removed.
* If it does fall into the range, there is nothing I can do about it.
Only Gnulib's re_search_2() allows searching over two buffers.
|
|
* This fixes F< to the beginning of the macro, which was broken in 73d574b71a10d4661ada20275cafde75aff6c1ba.
teco_machine_main_t::macro_pc actually has to be signed as it is sometimes set to -1.
|
|
errors
* teco_cmdline.pc is not correct after an error occurred.
Therefore start_pc is initialized with teco_cmdline.effective_len.
|
|
parsed correctly
|
|
* ALL keypresses (the UTF-8 sequences resulting from key presses) can now be remapped.
* This is especially useful with Unicode support, as you might want to alias
international characters to their corresponding latin form in the start state,
so you don't have to change keyboard layouts so often.
This is done automatically in Gtk, where we have hardware key press information,
but has to be done with key macros in Curses.
There is a new key mask 4 (bit 3) for that purpose now.
* Also, you might want to define non-ANSI letters to perform special functions in
the start state where it won't be accepted by the parser anyway.
Suppose you have a macro M→, you could define
@^U[^K→]{m→} 1^_U[^K→]
This effectively "extends" the parser and allow you to call macro "→" by a single
key press. See also #5.
* The register prefix has been changed from ^F (for function) to ^K (for key).
This is the only thing you have to change in order to migrate existing
function key macros.
* Key macros are enabled by default. There is no longer any way to disable
function key handling in curses, as I never found any reason or need to disable it.
Theoretically, the default ESCDELAY could turn out to be too small and function
keys don't get through. I doubt that's possible unless on extremely slow serial lines.
Even then, you'd have to increase ESCDELAY and instead of disabling function keys
simply define an escape surrogate.
* The ED flag has been removed and its place is reserved for a future mouse support flag
(which does make sense to disable in curses sometimes).
fnkeys.tes is consequently also enabled by default in sample.teco_ini.
* Key macros are handled as an unit. If one character results in an error,
the entire string is rubbed out.
This fixes the "CLOSE" key on Gtk.
It also makes sure that the original error message is preserved and not overwritten
by some subsequent syntax error.
It was never useful that we kept inserting characters after the first error.
|
|
* This is used for error messages (TECO macro stackframes),
so it's important to display columns in characters.
* Program counters are in bytes and therefore everywhere gsize.
This is by glib convention.
|
|
* pressing ^W in FG now deletes the entire directory component as in EB
* commands without glob patterns (eg. EW) can now autocomplete file names containing
glob patterns
* When the autocompletion contains a glob character in commands accepting
glob patterns like EB or EN, we now escape the glob pattern.
This already helps if the remaining file name can be autocompleted in one go.
Unfortunately, this is still insufficient if we can only partially complete
and the partial completion contains glob characters.
For instance, if there are 2 files: `file?.txt` and `file?.foo`,
completing after `f` will insert `ile[?].`.
The second try to press Tab will already do nothing.
To fully support these cases, we need a version of teco_file_auto_complete()
accepting glob patterns.
Perhaps we can simply append `*` to the given glob pattern.
|
|
* while code is guaranteed to be in valid UTF-8, this cannot be
said about the result of string building.
* The search pattern can end up with invalid Unicode bytes even when
searching on UTF-8 buffers, e.g. if ^EQq inserts garbage.
There are currently no checks.
* When searching on a raw buffer, it must be possible to
search for arbitrary bytes (^EUq).
Since teco_pattern2regexp() was always expecting clean UTF-8 input,
this would sometimes skip over too many bytes and could even crash.
* Instead, teco_pattern2regexp() now takes the <S> target codepage
into account.
|
|
The following rules apply:
* All SciTECO macros __must__ be in valid UTF-8, regardless of the
the register's configured encoding.
This is checked against before execution, so we can use glib's non-validating
UTF-8 API afterwards.
* Things will inevitably get slower as we have to validate all macros first
and convert to gunichar for each and every character passed into the parser.
As an optimization, it may make sense to have our own inlineable version of
g_utf8_get_char() (TODO).
Also, Unicode glyphs in syntactically significant positions may be case-folded -
just like ASCII chars were. This is is of course slower than case folding
ASCII. The impact of this should be measured and perhaps we should restrict
case folding to a-z via teco_ascii_toupper().
* The language itself does not use any non-ANSI characters, so you don't have to
use UTF-8 characters.
* Wherever the parser expects a single character, it will now accept an arbitrary
Unicode/UTF-8 glyph as well.
In other words, you can call macros like M§ instead of having to write M[§].
You can also get the codepoint of any Unicode character with ^^x.
Pressing an Unicode character in the start state or in Ex and Fx will now
give a sane error message.
* When pressing a key which produces a multi-byte UTF-8 sequence, the character
gets translated back and forth multiple times:
1. It's converted to an UTF-8 string, either buffered or by IME methods (Gtk).
On Curses we could directly get a wide char using wget_wch(), but it's
not currently used, so we don't depend on widechar curses.
2. Parsed into gunichar for passing into the edit command callbacks.
This also validates the codepoint - everything later on can assume valid
codepoints and valid UTF-8 strings.
3. Once the edit command handling decides to insert the key into the command line,
it is serialized back into an UTF-8 string as the command line macro has
to be in UTF-8 (like all other macros).
4. The parser reads back gunichars without validation for passing into
the parser callbacks.
* Flickering in the Curses UI and Pango warnings in Gtk, due to incompletely
inserted and displayed UTF-8 sequences, are now fixed.
|
|
* The default ANSI versions of the Win32 API calls worked only as
long as we used the ANSI subset of UTF-8 in filenames.
* There is g_win32_locale_filename_from_utf8(), but it's not guaranteed
to derive an unique filename.
* Therefore we define UNICODE and convert between UTF-8 and UTF-16
(Windows' native Unicode encoding).
|
|
* Should prevent data loss due to system locale conversions
when parsing command line arguments.
* Should also fix passing Unicode arguments to munged macros and
therefore opening files via ~/.teco_ini.
* The entire option parsing is based on GStrv (null-terminated string lists)
now, also on UNIX.
|
|
* turns out that glib's g_assert() does not depend on NDEBUG like Standard C's assert()
* this disables assertions in release builds and should speed up things slightly
|
|
* use SCI_GETTEXTRANGEFULL instead of deprecated SCI_GETTEXTRANGE
|
|
* significantly speeds up build time
* Scintilla and Lexilla headers and symbols are all-ASCII anyway.
* We should probably have a look at the quicksort implementation
in string.tes, as it can probably be optimized in UTF-8 documents as well.
|
|
teco_interface_glyphs2bytes() and teco_interface_bytes2glyphs() (refs #5)
* for consistency with all the other teco_view wrappers in interface.h
|
|
* When enabled with bit 2 in the ED flags (0,4ED),
all registers and buffers will get the raw ANSI encoding (as if 0EE had been
called on them).
You can still manually change the encoding, eg. by calling 65001EE afterwards.
* Also the ANSI mode sets up character representations for all bytes >= 0x80.
This is currently done only depending on the ED flag, not when setting 0EE.
* Since setting 16,4ED for 8-bit clean editing in a macro can be tricky -
the default unnamed buffer will still be at UTF-8 and at least a bunch
of environment registers as well - we added the command line option
`--8bit` (short `-8`) which configures the ED flags very early on.
As another advantage you can mung the profile in 8-bit mode as well
when using SciTECO as a sort of interactive hex editor.
* Disable UTF-8 checks in 8-bit clean mode (sample.teco_ini).
|
|
* ^Uq however always sets an UTF8 register as the source
is supposed to be a SciTECO macro which is always UTF-8.
* :^Uq preserves the register's encoding
* teco_doc_set_string() now also sets the encoding
* instead of trying to restore the encoding in teco_doc_undo_set_string(),
we now swap out the document in a teco_doc_t and pass it to an undo token.
* The get_codepage() Q-Reg method has been removed as the same
can now be done with teco_doc_get_string() and the get_string() method.
|
|
* <nI> and ^EUq do the same
|
|
* Eg. when typing with a Russian layout, CTRL+I will always insert ^I.
* Works with all of the start-state command Ex, Fx, ^x commands and
string building constructs.
This is exactly where process_edit_cmd_cb() case folds case-insensitive
characters.
The corresponding state therefore sets an is_case_insensitive flag now.
* Does not yet work with anything embedded into Q-Register specifications.
This could only be realized with a new state callback (is_case_insensitive()?)
that chains to the Q-Register and string building states recursively.
* Also it doesn't work with Ё on my Russian phonetic layout,
probably because the ANSI caret on that same key is considered dead
and not returned by gdk_keyval_to_unicode().
Perhaps we should directly wheck the keyval values?
* Whenever a non-ANSI key is pressed in an allowed state,
we try to check all other keyvals that could be produced by the same
hardware keycode, ie. we check all groups (keyboard layouts).
|
|
(refs #5)
|
|
is taken into account (refs #5)
* ^Nx and ^EMx constructs work with Unicode glyphs now,
even though the main SciTECO parser is still not Unicode-based.
(We translate only complete patterns, although they could have incomplete Unicode sequences at their end.)
* case-insensitive searching now works with Unicode glyphs
|
|
or codepoints) (refs #5)
* This is trickier than it sounds because there isn't one single place to consult.
It depends on the context.
If the string argument relates to buffer contents - as in <I>, <S>, <FR> etc. -
the buffer's encoding is consulted.
If it goes into a register (EU), the register's encoding is consulted.
Everything else (O, EN, EC, ES...) expects only Unicode codepoints.
* This is communicated through a new field teco_machine_stringbuilding_t::codepage
which must be set in the states' initial callback.
* Seems overkill just for ^EUq, but it can be used for context-sensitive
processing of all the other string building constructs as well.
* ^V and ^W cannot be supported for Unicode characters for the time being without an Unicode-aware parser
|
|
|
|
* This will naturally work with both ASCII characters and various
non-English scripts.
* Unfortunately, it cannot work with the other non-ANSI single-byte codepages.
* If we'd like to support scripts working with all sorts of codepoints,
we'd have to introduce a new command for translating individual codepoints
from the current codepage (as reported by EE) to Unicode.
|
|
* The ASCII compiler would try to escape ("\") all bytes of a multibyte
UTF-8 glyph.
* The new implementation escapes only metacharacters and passes down
all non-ANSI glyphs unchanged.
On the downside, this will work only with PCREs.
|
|
* I decoded the Scintilla charset values into codepages, at least
those used on Gtk.
* make sure that the line character index is not allocated or released
too often, as it is actually internally reference counted, which
could result in it missing when we really need it.
* The line character index still appears to be released whenever
the document pointer changes, which will happen after using
a different Q-Register.
This could be a performance bottleneck (FIXME).
|
|
teco_state_start_get() (refs #5)
|
|
There is a widespread myth that they could take up to 6 bytes.
|
