From 05826b51ec41ae091756087bc734931c071e9221 Mon Sep 17 00:00:00 2001 From: Robin Haberkorn Date: Mon, 5 May 2025 10:30:24 +0300 Subject: reconstructed Autotools build system (closes #1) The resulting config.h.in is similar to the one from the CVS repo. However, I removed checks that apparently weren't referenced in the code base. Also, I fixed the terminfo check. Previously, it was actually building against termcap on my system. Terminfo should always be preferred. Currently, it does not check against ncurses itself. If it turns out there are systems with an ncurses pkg-config file, but without tinfo, we might have to check for ncurses as well. It adds both -Wall and -Wsign-compare, which turned out to be useful to debug the DOS version. --- .gitignore | 9 +- AUTHORS | 2 + ChangeLog | 0 Doxyfile | 1551 ------------- INSTALL | 365 +++ Makefile.am | 26 + NEWS | 0 README.md | 3 +- config.h.in | 224 -- configure | 6770 ------------------------------------------------------- configure.ac | 81 + doc/Doxyfile.in | 1551 +++++++++++++ makefile.in | 63 - 13 files changed, 2032 insertions(+), 8613 deletions(-) create mode 100644 AUTHORS create mode 100644 ChangeLog delete mode 100644 Doxyfile create mode 100644 INSTALL create mode 100644 Makefile.am create mode 100644 NEWS delete mode 100644 config.h.in delete mode 100755 configure create mode 100644 configure.ac create mode 100644 doc/Doxyfile.in delete mode 100644 makefile.in diff --git a/.gitignore b/.gitignore index 8f2898b..b416898 100644 --- a/.gitignore +++ b/.gitignore @@ -1,7 +1,7 @@ # Autotools -#/configure +/configure /config.h -#/config.h.in +/config.h.in /config.log /config.status /config @@ -14,8 +14,9 @@ *.lo *.a *.o -makefile -#makefile.in +Makefile +Makefile.in +doc/Doxyfile /teco # OpenWatcom build system diff --git a/AUTHORS b/AUTHORS new file mode 100644 index 0000000..04abeb2 --- /dev/null +++ b/AUTHORS @@ -0,0 +1,2 @@ +Paul Cantrell +Robin Haberkorn diff --git a/ChangeLog b/ChangeLog new file mode 100644 index 0000000..e69de29 diff --git a/Doxyfile b/Doxyfile deleted file mode 100644 index af9218b..0000000 --- a/Doxyfile +++ /dev/null @@ -1,1551 +0,0 @@ -# Doxyfile 1.6.3 - -# This file describes the settings to be used by the documentation system -# doxygen (www.doxygen.org) for a project -# -# All text after a hash (#) is considered a comment and will be ignored -# The format is: -# TAG = value [value, ...] -# For lists items can also be appended using: -# TAG += value [value, ...] -# Values that contain spaces should be placed between quotes (" ") - -#--------------------------------------------------------------------------- -# Project related configuration options -#--------------------------------------------------------------------------- - -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all -# text before the first occurrence of this tag. Doxygen uses libiconv (or the -# iconv built into libc) for the transcoding. See -# http://www.gnu.org/software/libiconv for the list of possible encodings. - -DOXYFILE_ENCODING = UTF-8 - -# The PROJECT_NAME tag is a single word (or a sequence of words surrounded -# by quotes) that should identify the project. - -PROJECT_NAME = Video TECO - -# The PROJECT_NUMBER tag can be used to enter a project or revision number. -# This could be handy for archiving the generated documentation or -# if some version control system is used. - -PROJECT_NUMBER = - -# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) -# base path where the generated documentation will be put. -# If a relative path is entered, it will be relative to the location -# where doxygen was started. If left blank the current directory will be used. - -OUTPUT_DIRECTORY = doc - -# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create -# 4096 sub-directories (in 2 levels) under the output directory of each output -# format and will distribute the generated files over these directories. -# Enabling this option can be useful when feeding doxygen a huge amount of -# source files, where putting all generated files in the same directory would -# otherwise cause performance problems for the file system. - -CREATE_SUBDIRS = NO - -# The OUTPUT_LANGUAGE tag is used to specify the language in which all -# documentation generated by doxygen is written. Doxygen will use this -# information to generate all constant output in the proper language. -# The default language is English, other supported languages are: -# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, -# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, -# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. - -OUTPUT_LANGUAGE = English - -# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will -# include brief member descriptions after the members that are listed in -# the file and class documentation (similar to JavaDoc). -# Set to NO to disable this. - -BRIEF_MEMBER_DESC = YES - -# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend -# the brief description of a member or function before the detailed description. -# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the -# brief descriptions will be completely suppressed. - -REPEAT_BRIEF = YES - -# This tag implements a quasi-intelligent brief description abbreviator -# that is used to form the text in various listings. Each string -# in this list, if found as the leading text of the brief description, will be -# stripped from the text and the result after processing the whole list, is -# used as the annotated text. Otherwise, the brief description is used as-is. -# If left blank, the following values are used ("$name" is automatically -# replaced with the name of the entity): "The $name class" "The $name widget" -# "The $name file" "is" "provides" "specifies" "contains" -# "represents" "a" "an" "the" - -ABBREVIATE_BRIEF = - -# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then -# Doxygen will generate a detailed section even if there is only a brief -# description. - -ALWAYS_DETAILED_SEC = NO - -# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all -# inherited members of a class in the documentation of that class as if those -# members were ordinary class members. Constructors, destructors and assignment -# operators of the base classes will not be shown. - -INLINE_INHERITED_MEMB = NO - -# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full -# path before files name in the file list and in the header files. If set -# to NO the shortest path that makes the file name unique will be used. - -FULL_PATH_NAMES = YES - -# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag -# can be used to strip a user-defined part of the path. Stripping is -# only done if one of the specified strings matches the left-hand part of -# the path. The tag can be used to show relative paths in the file list. -# If left blank the directory from which doxygen is run is used as the -# path to strip. - -STRIP_FROM_PATH = - -# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of -# the path mentioned in the documentation of a class, which tells -# the reader which header file to include in order to use a class. -# If left blank only the name of the header file containing the class -# definition is used. Otherwise one should specify the include paths that -# are normally passed to the compiler using the -I flag. - -STRIP_FROM_INC_PATH = - -# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter -# (but less readable) file names. This can be useful is your file systems -# doesn't support long names like on DOS, Mac, or CD-ROM. - -SHORT_NAMES = NO - -# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen -# will interpret the first line (until the first dot) of a JavaDoc-style -# comment as the brief description. If set to NO, the JavaDoc -# comments will behave just like regular Qt-style comments -# (thus requiring an explicit @brief command for a brief description.) - -JAVADOC_AUTOBRIEF = NO - -# If the QT_AUTOBRIEF tag is set to YES then Doxygen will -# interpret the first line (until the first dot) of a Qt-style -# comment as the brief description. If set to NO, the comments -# will behave just like regular Qt-style comments (thus requiring -# an explicit \brief command for a brief description.) - -QT_AUTOBRIEF = NO - -# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen -# treat a multi-line C++ special comment block (i.e. a block of //! or /// -# comments) as a brief description. This used to be the default behaviour. -# The new default is to treat a multi-line C++ comment block as a detailed -# description. Set this tag to YES if you prefer the old behaviour instead. - -MULTILINE_CPP_IS_BRIEF = NO - -# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented -# member inherits the documentation from any documented member that it -# re-implements. - -INHERIT_DOCS = YES - -# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce -# a new page for each member. If set to NO, the documentation of a member will -# be part of the file/class/namespace that contains it. - -SEPARATE_MEMBER_PAGES = NO - -# The TAB_SIZE tag can be used to set the number of spaces in a tab. -# Doxygen uses this value to replace tabs by spaces in code fragments. - -TAB_SIZE = 8 - -# This tag can be used to specify a number of aliases that acts -# as commands in the documentation. An alias has the form "name=value". -# For example adding "sideeffect=\par Side Effects:\n" will allow you to -# put the command \sideeffect (or @sideeffect) in the documentation, which -# will result in a user-defined paragraph with heading "Side Effects:". -# You can put \n's in the value part of an alias to insert newlines. - -ALIASES = - -# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C -# sources only. Doxygen will then generate output that is more tailored for C. -# For instance, some of the names that are used will be different. The list -# of all members will be omitted, etc. - -OPTIMIZE_OUTPUT_FOR_C = YES - -# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java -# sources only. Doxygen will then generate output that is more tailored for -# Java. For instance, namespaces will be presented as packages, qualified -# scopes will look different, etc. - -OPTIMIZE_OUTPUT_JAVA = NO - -# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran -# sources only. Doxygen will then generate output that is more tailored for -# Fortran. - -OPTIMIZE_FOR_FORTRAN = NO - -# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL -# sources. Doxygen will then generate output that is tailored for -# VHDL. - -OPTIMIZE_OUTPUT_VHDL = NO - -# Doxygen selects the parser to use depending on the extension of the files it parses. -# With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this tag. -# The format is ext=language, where ext is a file extension, and language is one of -# the parsers supported by doxygen: IDL, Java, Javascript, C#, C, C++, D, PHP, -# Objective-C, Python, Fortran, VHDL, C, C++. For instance to make doxygen treat -# .inc files as Fortran files (default is PHP), and .f files as C (default is Fortran), -# use: inc=Fortran f=C. Note that for custom extensions you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. - -EXTENSION_MAPPING = - -# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want -# to include (a tag file for) the STL sources as input, then you should -# set this tag to YES in order to let doxygen match functions declarations and -# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. -# func(std::string) {}). This also make the inheritance and collaboration -# diagrams that involve STL classes more complete and accurate. - -BUILTIN_STL_SUPPORT = NO - -# If you use Microsoft's C++/CLI language, you should set this option to YES to -# enable parsing support. - -CPP_CLI_SUPPORT = NO - -# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. -# Doxygen will parse them like normal C++ but will assume all classes use public -# instead of private inheritance when no explicit protection keyword is present. - -SIP_SUPPORT = NO - -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen to replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. - -IDL_PROPERTY_SUPPORT = YES - -# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC -# tag is set to YES, then doxygen will reuse the documentation of the first -# member in the group (if any) for the other members of the group. By default -# all members of a group must be documented explicitly. - -DISTRIBUTE_GROUP_DOC = NO - -# Set the SUBGROUPING tag to YES (the default) to allow class member groups of -# the same type (for instance a group of public functions) to be put as a -# subgroup of that type (e.g. under the Public Functions section). Set it to -# NO to prevent subgrouping. Alternatively, this can be done per class using -# the \nosubgrouping command. - -SUBGROUPING = YES - -# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum -# is documented as struct, union, or enum with the name of the typedef. So -# typedef struct TypeS {} TypeT, will appear in the documentation as a struct -# with name TypeT. When disabled the typedef will appear as a member of a file, -# namespace, or class. And the struct will be named TypeS. This can typically -# be useful for C code in case the coding convention dictates that all compound -# types are typedef'ed and only the typedef is referenced, never the tag name. - -TYPEDEF_HIDES_STRUCT = NO - -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penality. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will rougly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols - -SYMBOL_CACHE_SIZE = 0 - -#--------------------------------------------------------------------------- -# Build related configuration options -#--------------------------------------------------------------------------- - -# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in -# documentation are documented, even if no documentation was available. -# Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES - -EXTRACT_ALL = NO - -# If the EXTRACT_PRIVATE tag is set to YES all private members of a class -# will be included in the documentation. - -EXTRACT_PRIVATE = YES - -# If the EXTRACT_STATIC tag is set to YES all static members of a file -# will be included in the documentation. - -EXTRACT_STATIC = YES - -# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) -# defined locally in source files will be included in the documentation. -# If set to NO only classes defined in header files are included. - -EXTRACT_LOCAL_CLASSES = YES - -# This flag is only useful for Objective-C code. When set to YES local -# methods, which are defined in the implementation section but not in -# the interface are included in the documentation. -# If set to NO (the default) only methods in the interface are included. - -EXTRACT_LOCAL_METHODS = NO - -# If this flag is set to YES, the members of anonymous namespaces will be -# extracted and appear in the documentation as a namespace called -# 'anonymous_namespace{file}', where file will be replaced with the base -# name of the file that contains the anonymous namespace. By default -# anonymous namespace are hidden. - -EXTRACT_ANON_NSPACES = NO - -# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all -# undocumented members of documented classes, files or namespaces. -# If set to NO (the default) these members will be included in the -# various overviews, but no documentation section is generated. -# This option has no effect if EXTRACT_ALL is enabled. - -HIDE_UNDOC_MEMBERS = NO - -# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all -# undocumented classes that are normally visible in the class hierarchy. -# If set to NO (the default) these classes will be included in the various -# overviews. This option has no effect if EXTRACT_ALL is enabled. - -HIDE_UNDOC_CLASSES = NO - -# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all -# friend (class|struct|union) declarations. -# If set to NO (the default) these declarations will be included in the -# documentation. - -HIDE_FRIEND_COMPOUNDS = NO - -# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any -# documentation blocks found inside the body of a function. -# If set to NO (the default) these blocks will be appended to the -# function's detailed documentation block. - -HIDE_IN_BODY_DOCS = NO - -# The INTERNAL_DOCS tag determines if documentation -# that is typed after a \internal command is included. If the tag is set -# to NO (the default) then the documentation will be excluded. -# Set it to YES to include the internal documentation. - -INTERNAL_DOCS = YES - -# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate -# file names in lower-case letters. If set to YES upper-case letters are also -# allowed. This is useful if you have classes or files whose names only differ -# in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. - -CASE_SENSE_NAMES = YES - -# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen -# will show members with their full class and namespace scopes in the -# documentation. If set to YES the scope will be hidden. - -HIDE_SCOPE_NAMES = NO - -# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen -# will put a list of the files that are included by a file in the documentation -# of that file. - -SHOW_INCLUDE_FILES = YES - -# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen -# will list include files with double quotes in the documentation -# rather than with sharp brackets. - -FORCE_LOCAL_INCLUDES = NO - -# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] -# is inserted in the documentation for inline members. - -INLINE_INFO = YES - -# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen -# will sort the (detailed) documentation of file and class members -# alphabetically by member name. If set to NO the members will appear in -# declaration order. - -SORT_MEMBER_DOCS = YES - -# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the -# brief documentation of file, namespace and class members alphabetically -# by member name. If set to NO (the default) the members will appear in -# declaration order. - -SORT_BRIEF_DOCS = NO - -# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the (brief and detailed) documentation of class members so that constructors and destructors are listed first. If set to NO (the default) the constructors will appear in the respective orders defined by SORT_MEMBER_DOCS and SORT_BRIEF_DOCS. This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO. - -SORT_MEMBERS_CTORS_1ST = NO - -# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the -# hierarchy of group names into alphabetical order. If set to NO (the default) -# the group names will appear in their defined order. - -SORT_GROUP_NAMES = NO - -# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be -# sorted by fully-qualified names, including namespaces. If set to -# NO (the default), the class list will be sorted only by class name, -# not including the namespace part. -# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. -# Note: This option applies only to the class list, not to the -# alphabetical list. - -SORT_BY_SCOPE_NAME = NO - -# The GENERATE_TODOLIST tag can be used to enable (YES) or -# disable (NO) the todo list. This list is created by putting \todo -# commands in the documentation. - -GENERATE_TODOLIST = YES - -# The GENERATE_TESTLIST tag can be used to enable (YES) or -# disable (NO) the test list. This list is created by putting \test -# commands in the documentation. - -GENERATE_TESTLIST = YES - -# The GENERATE_BUGLIST tag can be used to enable (YES) or -# disable (NO) the bug list. This list is created by putting \bug -# commands in the documentation. - -GENERATE_BUGLIST = YES - -# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or -# disable (NO) the deprecated list. This list is created by putting -# \deprecated commands in the documentation. - -GENERATE_DEPRECATEDLIST= YES - -# The ENABLED_SECTIONS tag can be used to enable conditional -# documentation sections, marked by \if sectionname ... \endif. - -ENABLED_SECTIONS = - -# The MAX_INITIALIZER_LINES tag determines the maximum number of lines -# the initial value of a variable or define consists of for it to appear in -# the documentation. If the initializer consists of more lines than specified -# here it will be hidden. Use a value of 0 to hide initializers completely. -# The appearance of the initializer of individual variables and defines in the -# documentation can be controlled using \showinitializer or \hideinitializer -# command in the documentation regardless of this setting. - -MAX_INITIALIZER_LINES = 30 - -# Set the SHOW_USED_FILES tag to NO to disable the list of files generated -# at the bottom of the documentation of classes and structs. If set to YES the -# list will mention the files that were used to generate the documentation. - -SHOW_USED_FILES = YES - -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = NO - -# Set the SHOW_FILES tag to NO to disable the generation of the Files page. -# This will remove the Files entry from the Quick Index and from the -# Folder Tree View (if specified). The default is YES. - -SHOW_FILES = YES - -# Set the SHOW_NAMESPACES tag to NO to disable the generation of the -# Namespaces page. -# This will remove the Namespaces entry from the Quick Index -# and from the Folder Tree View (if specified). The default is YES. - -SHOW_NAMESPACES = YES - -# The FILE_VERSION_FILTER tag can be used to specify a program or script that -# doxygen should invoke to get the current version for each file (typically from -# the version control system). Doxygen will invoke the program by executing (via -# popen()) the command , where is the value of -# the FILE_VERSION_FILTER tag, and is the name of an input file -# provided by doxygen. Whatever the program writes to standard output -# is used as the file version. See the manual for examples. - -FILE_VERSION_FILTER = - -# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by -# doxygen. The layout file controls the global structure of the generated output files -# in an output format independent way. The create the layout file that represents -# doxygen's defaults, run doxygen with the -l option. You can optionally specify a -# file name after the option, if omitted DoxygenLayout.xml will be used as the name -# of the layout file. - -LAYOUT_FILE = - -#--------------------------------------------------------------------------- -# configuration options related to warning and progress messages -#--------------------------------------------------------------------------- - -# The QUIET tag can be used to turn on/off the messages that are generated -# by doxygen. Possible values are YES and NO. If left blank NO is used. - -QUIET = NO - -# The WARNINGS tag can be used to turn on/off the warning messages that are -# generated by doxygen. Possible values are YES and NO. If left blank -# NO is used. - -WARNINGS = YES - -# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings -# for undocumented members. If EXTRACT_ALL is set to YES then this flag will -# automatically be disabled. - -WARN_IF_UNDOCUMENTED = YES - -# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for -# potential errors in the documentation, such as not documenting some -# parameters in a documented function, or documenting parameters that -# don't exist or using markup commands wrongly. - -WARN_IF_DOC_ERROR = YES - -# This WARN_NO_PARAMDOC option can be abled to get warnings for -# functions that are documented, but have no documentation for their parameters -# or return value. If set to NO (the default) doxygen will only warn about -# wrong or incomplete parameter documentation, but not about the absence of -# documentation. - -WARN_NO_PARAMDOC = NO - -# The WARN_FORMAT tag determines the format of the warning messages that -# doxygen can produce. The string should contain the $file, $line, and $text -# tags, which will be replaced by the file and line number from which the -# warning originated and the warning text. Optionally the format may contain -# $version, which will be replaced by the version of the file (if it could -# be obtained via FILE_VERSION_FILTER) - -WARN_FORMAT = "$file:$line: $text" - -# The WARN_LOGFILE tag can be used to specify a file to which warning -# and error messages should be written. If left blank the output is written -# to stderr. - -WARN_LOGFILE = - -#--------------------------------------------------------------------------- -# configuration options related to the input files -#--------------------------------------------------------------------------- - -# The INPUT tag can be used to specify the files and/or directories that contain -# documented source files. You may enter file names like "myfile.cpp" or -# directories like "/usr/src/myproject". Separate the files or directories -# with spaces. - -INPUT = - -# This tag can be used to specify the character encoding of the source files -# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is -# also the default input encoding. Doxygen uses libiconv (or the iconv built -# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for -# the list of possible encodings. - -INPUT_ENCODING = UTF-8 - -# If the value of the INPUT tag contains directories, you can use the -# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp -# and *.h) to filter out the source-files in the directories. If left -# blank the following patterns are tested: -# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx -# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90 - -FILE_PATTERNS = - -# The RECURSIVE tag can be used to turn specify whether or not subdirectories -# should be searched for input files as well. Possible values are YES and NO. -# If left blank NO is used. - -RECURSIVE = NO - -# The EXCLUDE tag can be used to specify files and/or directories that should -# excluded from the INPUT source files. This way you can easily exclude a -# subdirectory from a directory tree whose root is specified with the INPUT tag. - -EXCLUDE = - -# The EXCLUDE_SYMLINKS tag can be used select whether or not files or -# directories that are symbolic links (a Unix filesystem feature) are excluded -# from the input. - -EXCLUDE_SYMLINKS = NO - -# If the value of the INPUT tag contains directories, you can use the -# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude -# certain files from those directories. Note that the wildcards are matched -# against the file with absolute path, so to exclude all test directories -# for example use the pattern */test/* - -EXCLUDE_PATTERNS = - -# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names -# (namespaces, classes, functions, etc.) that should be excluded from the -# output. The symbol name can be a fully qualified name, a word, or if the -# wildcard * is used, a substring. Examples: ANamespace, AClass, -# AClass::ANamespace, ANamespace::*Test - -EXCLUDE_SYMBOLS = - -# The EXAMPLE_PATH tag can be used to specify one or more files or -# directories that contain example code fragments that are included (see -# the \include command). - -EXAMPLE_PATH = - -# If the value of the EXAMPLE_PATH tag contains directories, you can use the -# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp -# and *.h) to filter out the source-files in the directories. If left -# blank all files are included. - -EXAMPLE_PATTERNS = - -# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be -# searched for input files to be used with the \include or \dontinclude -# commands irrespective of the value of the RECURSIVE tag. -# Possible values are YES and NO. If left blank NO is used. - -EXAMPLE_RECURSIVE = NO - -# The IMAGE_PATH tag can be used to specify one or more files or -# directories that contain image that are included in the documentation (see -# the \image command). - -IMAGE_PATH = - -# The INPUT_FILTER tag can be used to specify a program that doxygen should -# invoke to filter for each input file. Doxygen will invoke the filter program -# by executing (via popen()) the command , where -# is the value of the INPUT_FILTER tag, and is the name of an -# input file. Doxygen will then use the output that the filter program writes -# to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. - -INPUT_FILTER = - -# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern -# basis. -# Doxygen will compare the file name with each pattern and apply the -# filter if there is a match. -# The filters are a list of the form: -# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further -# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER -# is applied to all files. - -FILTER_PATTERNS = - -# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using -# INPUT_FILTER) will be used to filter the input files when producing source -# files to browse (i.e. when SOURCE_BROWSER is set to YES). - -FILTER_SOURCE_FILES = NO - -#--------------------------------------------------------------------------- -# configuration options related to source browsing -#--------------------------------------------------------------------------- - -# If the SOURCE_BROWSER tag is set to YES then a list of source files will -# be generated. Documented entities will be cross-referenced with these sources. -# Note: To get rid of all source code in the generated output, make sure also -# VERBATIM_HEADERS is set to NO. - -SOURCE_BROWSER = YES - -# Setting the INLINE_SOURCES tag to YES will include the body -# of functions and classes directly in the documentation. - -INLINE_SOURCES = NO - -# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct -# doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. - -STRIP_CODE_COMMENTS = YES - -# If the REFERENCED_BY_RELATION tag is set to YES -# then for each documented function all documented -# functions referencing it will be listed. - -REFERENCED_BY_RELATION = YES - -# If the REFERENCES_RELATION tag is set to YES -# then for each documented function all documented entities -# called/used by that function will be listed. - -REFERENCES_RELATION = NO - -# If the REFERENCES_LINK_SOURCE tag is set to YES (the default) -# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from -# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will -# link to the source code. -# Otherwise they will link to the documentation. - -REFERENCES_LINK_SOURCE = NO - -# If the USE_HTAGS tag is set to YES then the references to source code -# will point to the HTML generated by the htags(1) tool instead of doxygen -# built-in source browser. The htags tool is part of GNU's global source -# tagging system (see http://www.gnu.org/software/global/global.html). You -# will need version 4.8.6 or higher. - -USE_HTAGS = NO - -# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen -# will generate a verbatim copy of the header file for each class for -# which an include is specified. Set to NO to disable this. - -VERBATIM_HEADERS = YES - -#--------------------------------------------------------------------------- -# configuration options related to the alphabetical class index -#--------------------------------------------------------------------------- - -# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index -# of all compounds will be generated. Enable this if the project -# contains a lot of classes, structs, unions or interfaces. - -ALPHABETICAL_INDEX = NO - -# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then -# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns -# in which this list will be split (can be a number in the range [1..20]) - -COLS_IN_ALPHA_INDEX = 5 - -# In case all classes in a project start with a common prefix, all -# classes will be put under the same header in the alphabetical index. -# The IGNORE_PREFIX tag can be used to specify one or more prefixes that -# should be ignored while generating the index headers. - -IGNORE_PREFIX = - -#--------------------------------------------------------------------------- -# configuration options related to the HTML output -#--------------------------------------------------------------------------- - -# If the GENERATE_HTML tag is set to YES (the default) Doxygen will -# generate HTML output. - -GENERATE_HTML = YES - -# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `html' will be used as the default path. - -HTML_OUTPUT = html - -# The HTML_FILE_EXTENSION tag can be used to specify the file extension for -# each generated HTML page (for example: .htm,.php,.asp). If it is left blank -# doxygen will generate files with .html extension. - -HTML_FILE_EXTENSION = .html - -# The HTML_HEADER tag can be used to specify a personal HTML header for -# each generated HTML page. If it is left blank doxygen will generate a -# standard header. - -HTML_HEADER = - -# The HTML_FOOTER tag can be used to specify a personal HTML footer for -# each generated HTML page. If it is left blank doxygen will generate a -# standard footer. - -HTML_FOOTER = - -# The HTML_STYLESHEET tag can be used to specify a user-defined cascading -# style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# stylesheet in the HTML output directory as well, or it will be erased! - -HTML_STYLESHEET = - -# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML -# page will contain the date and time when the page was generated. Setting -# this to NO can help when comparing the output of multiple runs. - -HTML_TIMESTAMP = YES - -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - -# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML -# documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). - -HTML_DYNAMIC_SECTIONS = YES - -# If the GENERATE_DOCSET tag is set to YES, additional index files -# will be generated that can be used as input for Apple's Xcode 3 -# integrated development environment, introduced with OSX 10.5 (Leopard). -# To create a documentation set, doxygen will generate a Makefile in the -# HTML output directory. Running make will produce the docset in that -# directory and running "make install" will install the docset in -# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find -# it at startup. -# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for more information. - -GENERATE_DOCSET = NO - -# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the -# feed. A documentation feed provides an umbrella under which multiple -# documentation sets from a single provider (such as a company or product suite) -# can be grouped. - -DOCSET_FEEDNAME = "Doxygen generated docs" - -# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that -# should uniquely identify the documentation set bundle. This should be a -# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen -# will append .docset to the name. - -DOCSET_BUNDLE_ID = org.doxygen.Project - -# If the GENERATE_HTMLHELP tag is set to YES, additional index files -# will be generated that can be used as input for tools like the -# Microsoft HTML help workshop to generate a compiled HTML help file (.chm) -# of the generated HTML documentation. - -GENERATE_HTMLHELP = NO - -# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can -# be used to specify the file name of the resulting .chm file. You -# can add a path in front of the file if the result should not be -# written to the html output directory. - -CHM_FILE = - -# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can -# be used to specify the location (absolute path including file name) of -# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run -# the HTML help compiler on the generated index.hhp. - -HHC_LOCATION = - -# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag -# controls if a separate .chi index file is generated (YES) or that -# it should be included in the master .chm file (NO). - -GENERATE_CHI = NO - -# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING -# is used to encode HtmlHelp index (hhk), content (hhc) and project file -# content. - -CHM_INDEX_ENCODING = - -# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag -# controls whether a binary table of contents is generated (YES) or a -# normal table of contents (NO) in the .chm file. - -BINARY_TOC = NO - -# The TOC_EXPAND flag can be set to YES to add extra items for group members -# to the contents of the HTML help documentation and to the tree view. - -TOC_EXPAND = NO - -# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER -# are set, an additional index file will be generated that can be used as input for -# Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated -# HTML documentation. - -GENERATE_QHP = NO - -# If the QHG_LOCATION tag is specified, the QCH_FILE tag can -# be used to specify the file name of the resulting .qch file. -# The path specified is relative to the HTML output folder. - -QCH_FILE = - -# The QHP_NAMESPACE tag specifies the namespace to use when generating -# Qt Help Project output. For more information please see -# http://doc.trolltech.com/qthelpproject.html#namespace - -QHP_NAMESPACE = org.doxygen.Project - -# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating -# Qt Help Project output. For more information please see -# http://doc.trolltech.com/qthelpproject.html#virtual-folders - -QHP_VIRTUAL_FOLDER = doc - -# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to add. -# For more information please see -# http://doc.trolltech.com/qthelpproject.html#custom-filters - -QHP_CUST_FILTER_NAME = - -# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the custom filter to add.For more information please see -# Qt Help Project / Custom Filters. - -QHP_CUST_FILTER_ATTRS = - -# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this project's -# filter section matches. -# Qt Help Project / Filter Attributes. - -QHP_SECT_FILTER_ATTRS = - -# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can -# be used to specify the location of Qt's qhelpgenerator. -# If non-empty doxygen will try to run qhelpgenerator on the generated -# .qhp file. - -QHG_LOCATION = - -# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files -# will be generated, which together with the HTML files, form an Eclipse help -# plugin. To install this plugin and make it available under the help contents -# menu in Eclipse, the contents of the directory containing the HTML and XML -# files needs to be copied into the plugins directory of eclipse. The name of -# the directory within the plugins directory should be the same as -# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before the help appears. - -GENERATE_ECLIPSEHELP = NO - -# A unique identifier for the eclipse help plugin. When installing the plugin -# the directory name containing the HTML and XML files should also have -# this name. - -ECLIPSE_DOC_ID = org.doxygen.Project - -# The DISABLE_INDEX tag can be used to turn on/off the condensed index at -# top of each HTML page. The value NO (the default) enables the index and -# the value YES disables it. - -DISABLE_INDEX = NO - -# This tag can be used to set the number of enum values (range [1..20]) -# that doxygen will group on one line in the generated HTML documentation. - -ENUM_VALUES_PER_LINE = 4 - -# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index -# structure should be generated to display hierarchical information. -# If the tag value is set to YES, a side panel will be generated -# containing a tree-like index structure (just like the one that -# is generated for HTML Help). For this to work a browser that supports -# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser). -# Windows users are probably better off using the HTML help feature. - -GENERATE_TREEVIEW = NO - -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - -# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be -# used to set the initial width (in pixels) of the frame in which the tree -# is shown. - -TREEVIEW_WIDTH = 250 - -# Use this tag to change the font size of Latex formulas included -# as images in the HTML documentation. The default is 10. Note that -# when you change the font size after a successful doxygen run you need -# to manually remove any form_*.png images from the HTML output directory -# to force them to be regenerated. - -FORMULA_FONTSIZE = 10 - -# When the SEARCHENGINE tag is enabled doxygen will generate a search box for the HTML output. The underlying search engine uses javascript -# and DHTML and should work on any modern browser. Note that when using HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET) there is already a search function so this one should -# typically be disabled. For large projects the javascript based search engine -# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution. - -SEARCHENGINE = YES - -# When the SERVER_BASED_SEARCH tag is enabled the search engine will be implemented using a PHP enabled web server instead of at the web client using Javascript. Doxygen will generate the search PHP script and index -# file to put on the web server. The advantage of the server based approach is that it scales better to large projects and allows full text search. The disadvances is that it is more difficult to setup -# and does not have live searching capabilities. - -SERVER_BASED_SEARCH = NO - -#--------------------------------------------------------------------------- -# configuration options related to the LaTeX output -#--------------------------------------------------------------------------- - -# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will -# generate Latex output. - -GENERATE_LATEX = NO - -# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `latex' will be used as the default path. - -LATEX_OUTPUT = latex - -# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be -# invoked. If left blank `latex' will be used as the default command name. -# Note that when enabling USE_PDFLATEX this option is only used for -# generating bitmaps for formulas in the HTML output, but not in the -# Makefile that is written to the output directory. - -LATEX_CMD_NAME = latex - -# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to -# generate index for LaTeX. If left blank `makeindex' will be used as the -# default command name. - -MAKEINDEX_CMD_NAME = makeindex - -# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact -# LaTeX documents. This may be useful for small projects and may help to -# save some trees in general. - -COMPACT_LATEX = NO - -# The PAPER_TYPE tag can be used to set the paper type that is used -# by the printer. Possible values are: a4, a4wide, letter, legal and -# executive. If left blank a4wide will be used. - -PAPER_TYPE = a4wide - -# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX -# packages that should be included in the LaTeX output. - -EXTRA_PACKAGES = - -# The LATEX_HEADER tag can be used to specify a personal LaTeX header for -# the generated latex document. The header should contain everything until -# the first chapter. If it is left blank doxygen will generate a -# standard header. Notice: only use this tag if you know what you are doing! - -LATEX_HEADER = - -# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated -# is prepared for conversion to pdf (using ps2pdf). The pdf file will -# contain links (just like the HTML output) instead of page references -# This makes the output suitable for online browsing using a pdf viewer. - -PDF_HYPERLINKS = YES - -# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of -# plain latex in the generated Makefile. Set this option to YES to get a -# higher quality PDF documentation. - -USE_PDFLATEX = YES - -# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. -# command to the generated LaTeX files. This will instruct LaTeX to keep -# running if errors occur, instead of asking the user for help. -# This option is also used when generating formulas in HTML. - -LATEX_BATCHMODE = NO - -# If LATEX_HIDE_INDICES is set to YES then doxygen will not -# include the index chapters (such as File Index, Compound Index, etc.) -# in the output. - -LATEX_HIDE_INDICES = NO - -# If LATEX_SOURCE_CODE is set to YES then doxygen will include source code with syntax highlighting in the LaTeX output. Note that which sources are shown also depends on other settings such as SOURCE_BROWSER. - -LATEX_SOURCE_CODE = NO - -#--------------------------------------------------------------------------- -# configuration options related to the RTF output -#--------------------------------------------------------------------------- - -# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output -# The RTF output is optimized for Word 97 and may not look very pretty with -# other RTF readers or editors. - -GENERATE_RTF = NO - -# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `rtf' will be used as the default path. - -RTF_OUTPUT = rtf - -# If the COMPACT_RTF tag is set to YES Doxygen generates more compact -# RTF documents. This may be useful for small projects and may help to -# save some trees in general. - -COMPACT_RTF = NO - -# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated -# will contain hyperlink fields. The RTF file will -# contain links (just like the HTML output) instead of page references. -# This makes the output suitable for online browsing using WORD or other -# programs which support those fields. -# Note: wordpad (write) and others do not support links. - -RTF_HYPERLINKS = NO - -# Load stylesheet definitions from file. Syntax is similar to doxygen's -# config file, i.e. a series of assignments. You only have to provide -# replacements, missing definitions are set to their default value. - -RTF_STYLESHEET_FILE = - -# Set optional variables used in the generation of an rtf document. -# Syntax is similar to doxygen's config file. - -RTF_EXTENSIONS_FILE = - -#--------------------------------------------------------------------------- -# configuration options related to the man page output -#--------------------------------------------------------------------------- - -# If the GENERATE_MAN tag is set to YES (the default) Doxygen will -# generate man pages - -GENERATE_MAN = NO - -# The MAN_OUTPUT tag is used to specify where the man pages will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `man' will be used as the default path. - -MAN_OUTPUT = man - -# The MAN_EXTENSION tag determines the extension that is added to -# the generated man pages (default is the subroutine's section .3) - -MAN_EXTENSION = .3 - -# If the MAN_LINKS tag is set to YES and Doxygen generates man output, -# then it will generate one additional man file for each entity -# documented in the real man page(s). These additional files -# only source the real man page, but without them the man command -# would be unable to find the correct page. The default is NO. - -MAN_LINKS = NO - -#--------------------------------------------------------------------------- -# configuration options related to the XML output -#--------------------------------------------------------------------------- - -# If the GENERATE_XML tag is set to YES Doxygen will -# generate an XML file that captures the structure of -# the code including all documentation. - -GENERATE_XML = NO - -# The XML_OUTPUT tag is used to specify where the XML pages will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `xml' will be used as the default path. - -XML_OUTPUT = xml - -# The XML_SCHEMA tag can be used to specify an XML schema, -# which can be used by a validating XML parser to check the -# syntax of the XML files. - -XML_SCHEMA = - -# The XML_DTD tag can be used to specify an XML DTD, -# which can be used by a validating XML parser to check the -# syntax of the XML files. - -XML_DTD = - -# If the XML_PROGRAMLISTING tag is set to YES Doxygen will -# dump the program listings (including syntax highlighting -# and cross-referencing information) to the XML output. Note that -# enabling this will significantly increase the size of the XML output. - -XML_PROGRAMLISTING = YES - -#--------------------------------------------------------------------------- -# configuration options for the AutoGen Definitions output -#--------------------------------------------------------------------------- - -# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will -# generate an AutoGen Definitions (see autogen.sf.net) file -# that captures the structure of the code including all -# documentation. Note that this feature is still experimental -# and incomplete at the moment. - -GENERATE_AUTOGEN_DEF = NO - -#--------------------------------------------------------------------------- -# configuration options related to the Perl module output -#--------------------------------------------------------------------------- - -# If the GENERATE_PERLMOD tag is set to YES Doxygen will -# generate a Perl module file that captures the structure of -# the code including all documentation. Note that this -# feature is still experimental and incomplete at the -# moment. - -GENERATE_PERLMOD = NO - -# If the PERLMOD_LATEX tag is set to YES Doxygen will generate -# the necessary Makefile rules, Perl scripts and LaTeX code to be able -# to generate PDF and DVI output from the Perl module output. - -PERLMOD_LATEX = NO - -# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be -# nicely formatted so it can be parsed by a human reader. -# This is useful -# if you want to understand what is going on. -# On the other hand, if this -# tag is set to NO the size of the Perl module output will be much smaller -# and Perl will parse it just the same. - -PERLMOD_PRETTY = YES - -# The names of the make variables in the generated doxyrules.make file -# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. -# This is useful so different doxyrules.make files included by the same -# Makefile don't overwrite each other's variables. - -PERLMOD_MAKEVAR_PREFIX = - -#--------------------------------------------------------------------------- -# Configuration options related to the preprocessor -#--------------------------------------------------------------------------- - -# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will -# evaluate all C-preprocessor directives found in the sources and include -# files. - -ENABLE_PREPROCESSING = YES - -# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro -# names in the source code. If set to NO (the default) only conditional -# compilation will be performed. Macro expansion can be done in a controlled -# way by setting EXPAND_ONLY_PREDEF to YES. - -MACRO_EXPANSION = NO - -# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES -# then the macro expansion is limited to the macros specified with the -# PREDEFINED and EXPAND_AS_DEFINED tags. - -EXPAND_ONLY_PREDEF = NO - -# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files -# in the INCLUDE_PATH (see below) will be search if a #include is found. - -SEARCH_INCLUDES = YES - -# The INCLUDE_PATH tag can be used to specify one or more directories that -# contain include files that are not input files but should be processed by -# the preprocessor. - -INCLUDE_PATH = - -# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard -# patterns (like *.h and *.hpp) to filter out the header-files in the -# directories. If left blank, the patterns specified with FILE_PATTERNS will -# be used. - -INCLUDE_FILE_PATTERNS = - -# The PREDEFINED tag can be used to specify one or more macro names that -# are defined before the preprocessor is started (similar to the -D option of -# gcc). The argument of the tag is a list of macros of the form: name -# or name=definition (no spaces). If the definition and the = are -# omitted =1 is assumed. To prevent a macro definition from being -# undefined via #undef or recursively expanded use the := operator -# instead of the = operator. - -PREDEFINED = - -# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then -# this tag can be used to specify a list of macro names that should be expanded. -# The macro definition that is found in the sources will be used. -# Use the PREDEFINED tag if you want to use a different macro definition. - -EXPAND_AS_DEFINED = - -# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then -# doxygen's preprocessor will remove all function-like macros that are alone -# on a line, have an all uppercase name, and do not end with a semicolon. Such -# function macros are typically used for boiler-plate code, and will confuse -# the parser if not removed. - -SKIP_FUNCTION_MACROS = YES - -#--------------------------------------------------------------------------- -# Configuration::additions related to external references -#--------------------------------------------------------------------------- - -# The TAGFILES option can be used to specify one or more tagfiles. -# Optionally an initial location of the external documentation -# can be added for each tagfile. The format of a tag file without -# this location is as follows: -# -# TAGFILES = file1 file2 ... -# Adding location for the tag files is done as follows: -# -# TAGFILES = file1=loc1 "file2 = loc2" ... -# where "loc1" and "loc2" can be relative or absolute paths or -# URLs. If a location is present for each tag, the installdox tool -# does not have to be run to correct the links. -# Note that each tag file must have a unique name -# (where the name does NOT include the path) -# If a tag file is not located in the directory in which doxygen -# is run, you must also specify the path to the tagfile here. - -TAGFILES = - -# When a file name is specified after GENERATE_TAGFILE, doxygen will create -# a tag file that is based on the input files it reads. - -GENERATE_TAGFILE = - -# If the ALLEXTERNALS tag is set to YES all external classes will be listed -# in the class index. If set to NO only the inherited external classes -# will be listed. - -ALLEXTERNALS = NO - -# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed -# in the modules index. If set to NO, only the current project's groups will -# be listed. - -EXTERNAL_GROUPS = YES - -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of `which perl'). - -PERL_PATH = /usr/bin/perl - -#--------------------------------------------------------------------------- -# Configuration options related to the dot tool -#--------------------------------------------------------------------------- - -# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will -# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base -# or super classes. Setting the tag to NO turns the diagrams off. Note that -# this option is superseded by the HAVE_DOT option below. This is only a -# fallback. It is recommended to install and use dot, since it yields more -# powerful graphs. - -CLASS_DIAGRAMS = YES - -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see -# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - -# If set to YES, the inheritance and collaboration graphs will hide -# inheritance and usage relations if the target is undocumented -# or is not a class. - -HIDE_UNDOC_RELATIONS = NO - -# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is -# available from the path. This tool is part of Graphviz, a graph visualization -# toolkit from AT&T and Lucent Bell Labs. The other options in this section -# have no effect if this option is set to NO (the default) - -HAVE_DOT = YES - -# By default doxygen will write a font called FreeSans.ttf to the output -# directory and reference it in all dot files that doxygen generates. This -# font does not include all possible unicode characters however, so when you need -# these (or just want a differently looking font) you can specify the font name -# using DOT_FONTNAME. You need need to make sure dot is able to find the font, -# which can be done by putting it in a standard location or by setting the -# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory -# containing the font. - -DOT_FONTNAME = FreeSans - -# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. -# The default size is 10pt. - -DOT_FONTSIZE = 10 - -# By default doxygen will tell dot to use the output directory to look for the -# FreeSans.ttf font (which doxygen will put there itself). If you specify a -# different font using DOT_FONTNAME you can set the path where dot -# can find it using this tag. - -DOT_FONTPATH = - -# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for each documented class showing the direct and -# indirect inheritance relations. Setting this tag to YES will force the -# the CLASS_DIAGRAMS tag to NO. - -CLASS_GRAPH = YES - -# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for each documented class showing the direct and -# indirect implementation dependencies (inheritance, containment, and -# class references variables) of the class with other documented classes. - -COLLABORATION_GRAPH = YES - -# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for groups, showing the direct groups dependencies - -GROUP_GRAPHS = YES - -# If the UML_LOOK tag is set to YES doxygen will generate inheritance and -# collaboration diagrams in a style similar to the OMG's Unified Modeling -# Language. - -UML_LOOK = YES - -# If set to YES, the inheritance and collaboration graphs will show the -# relations between templates and their instances. - -TEMPLATE_RELATIONS = NO - -# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT -# tags are set to YES then doxygen will generate a graph for each documented -# file showing the direct and indirect include dependencies of the file with -# other documented files. - -INCLUDE_GRAPH = YES - -# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and -# HAVE_DOT tags are set to YES then doxygen will generate a graph for each -# documented header file showing the documented files that directly or -# indirectly include this file. - -INCLUDED_BY_GRAPH = YES - -# If the CALL_GRAPH and HAVE_DOT options are set to YES then -# doxygen will generate a call dependency graph for every global function -# or class method. Note that enabling this option will significantly increase -# the time of a run. So in most cases it will be better to enable call graphs -# for selected functions only using the \callgraph command. - -CALL_GRAPH = YES - -# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then -# doxygen will generate a caller dependency graph for every global function -# or class method. Note that enabling this option will significantly increase -# the time of a run. So in most cases it will be better to enable caller -# graphs for selected functions only using the \callergraph command. - -CALLER_GRAPH = NO - -# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen -# will graphical hierarchy of all classes instead of a textual one. - -GRAPHICAL_HIERARCHY = YES - -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES -# then doxygen will show the dependencies a directory has on other directories -# in a graphical way. The dependency relations are determined by the #include -# relations between the files in the directories. - -DIRECTORY_GRAPH = YES - -# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. Possible values are png, jpg, or gif -# If left blank png will be used. - -DOT_IMAGE_FORMAT = png - -# The tag DOT_PATH can be used to specify the path where the dot tool can be -# found. If left blank, it is assumed the dot tool can be found in the path. - -DOT_PATH = - -# The DOTFILE_DIRS tag can be used to specify one or more directories that -# contain dot files that are included in the documentation (see the -# \dotfile command). - -DOTFILE_DIRS = - -# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of -# nodes that will be shown in the graph. If the number of nodes in a graph -# becomes larger than this value, doxygen will truncate the graph, which is -# visualized by representing a node as a red box. Note that doxygen if the -# number of direct children of the root node in a graph is already larger than -# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note -# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. - -DOT_GRAPH_MAX_NODES = 50 - -# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the -# graphs generated by dot. A depth value of 3 means that only nodes reachable -# from the root by following a path via at most 3 edges will be shown. Nodes -# that lay further from the root node will be omitted. Note that setting this -# option to 1 or 2 may greatly reduce the computation time needed for large -# code bases. Also note that the size of a graph can be further restricted by -# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. - -MAX_DOT_GRAPH_DEPTH = 0 - -# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent -# background. This is disabled by default, because dot on Windows does not -# seem to support this out of the box. Warning: Depending on the platform used, -# enabling this option may lead to badly anti-aliased labels on the edges of -# a graph (i.e. they become hard to read). - -DOT_TRANSPARENT = YES - -# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output -# files in one run (i.e. multiple -o and -T options on the command line). This -# makes dot run faster, but since only newer versions of dot (>1.8.10) -# support this, this feature is disabled by default. - -DOT_MULTI_TARGETS = YES - -# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will -# generate a legend page explaining the meaning of the various boxes and -# arrows in the dot generated graphs. - -GENERATE_LEGEND = YES - -# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will -# remove the intermediate dot files that are used to generate -# the various graphs. - -DOT_CLEANUP = YES diff --git a/INSTALL b/INSTALL new file mode 100644 index 0000000..d3b6e4e --- /dev/null +++ b/INSTALL @@ -0,0 +1,365 @@ +Installation Instructions +************************* + +Basic Installation +================== + + The following shell commands: + + test -f configure || ./bootstrap + ./configure + make + make install + +should configure, build, and install this package. The first line, +which bootstraps, is intended for developers; when building from +distribution tarballs it does nothing and can be skipped. + + The following more-detailed instructions are generic; see the +‘README’ file for instructions specific to this package. Some packages +provide this ‘INSTALL’ file but do not implement all of the features +documented below. The lack of an optional feature in a given package is +not necessarily a bug. More recommendations for GNU packages can be +found in the GNU Coding Standards. + + Many packages have scripts meant for developers instead of ordinary +builders, as they may use developer tools that are less commonly +installed, or they may access the network, which has privacy +implications. If the ‘bootstrap’ shell script exists, it attempts to +build the ‘configure’ shell script and related files, possibly using +developer tools or the network. Because the output of ‘bootstrap’ is +system-independent, it is normally run by a package developer so that +its output can be put into the distribution tarball and ordinary +builders and users need not run ‘bootstrap’. Some packages have +commands like ‘./autopull.sh’ and ‘./autogen.sh’ that you can run +instead of ‘./bootstrap’, for more fine-grained control over +bootstrapping. + + The ‘configure’ shell script attempts to guess correct values for +various system-dependent variables used during compilation. It uses +those values to create a ‘Makefile’ in each directory of the package. +It may also create one or more ‘.h’ files containing system-dependent +definitions. Finally, it creates a shell script ‘config.status’ that +you can run in the future to recreate the current configuration, and a +file ‘config.log’ containing output useful for debugging ‘configure’. + + It can also use an optional file (typically called ‘config.cache’ and +enabled with ‘--cache-file=config.cache’ or simply ‘-C’) that saves the +results of its tests to speed up reconfiguring. Caching is disabled by +default to prevent problems with accidental use of stale cache files. + + If you need to do unusual things to compile the package, please try +to figure out how ‘configure’ could check whether to do them, and mail +diffs or instructions to the address given in the ‘README’ so they can +be considered for the next release. If you are using the cache, and at +some point ‘config.cache’ contains results you don’t want to keep, you +may remove or edit it. + + The ‘autoconf’ program generates ‘configure’ from the file +‘configure.ac’. Normally you should edit ‘configure.ac’ instead of +editing ‘configure’ directly. + + The simplest way to compile this package is: + + 1. ‘cd’ to the directory containing the package’s source code. + + 2. If this is a developer checkout and file ‘configure’ does not yet + exist, type ‘./bootstrap’ to create it. You may need special + developer tools and network access to bootstrap, and the network + access may have privacy implications. + + 3. Type ‘./configure’ to configure the package for your system. This + might take a while. While running, ‘configure’ prints messages + telling which features it is checking for. + + 4. Type ‘make’ to compile the package. + + 5. Optionally, type ‘make check’ to run any self-tests that come with + the package, generally using the just-built uninstalled binaries. + + 6. Type ‘make install’ to install the programs and any data files and + documentation. When installing into a prefix owned by root, it is + recommended that the package be configured and built as a regular + user, and only the ‘make install’ phase executed with root + privileges. + + 7. Optionally, type ‘make installcheck’ to repeat any self-tests, but + this time using the binaries in their final installed location. + This target does not install anything. Running this target as a + regular user, particularly if the prior ‘make install’ required + root privileges, verifies that the installation completed + correctly. + + 8. You can remove the program binaries and object files from the + source code directory by typing ‘make clean’. To also remove the + files that ‘configure’ created (so you can compile the package for + a different kind of computer), type ‘make distclean’. There is + also a ‘make maintainer-clean’ target, but that is intended mainly + for the package’s developers. If you use it, you may have to + bootstrap again. + + 9. If the package follows the GNU Coding Standards, you can type ‘make + uninstall’ to remove the installed files. + +Compilers and Options +===================== + + Some systems require unusual options for compilation or linking that +the ‘configure’ script does not know about. Run ‘./configure --help’ +for details on some of the pertinent environment variables. + + You can give ‘configure’ initial values for configuration parameters +by setting variables in the command line or in the environment. Here is +an example: + + ./configure CC=gcc CFLAGS=-g LIBS=-lposix + + See “Defining Variables” for more details. + +Compiling For Multiple Architectures +==================================== + + You can compile the package for more than one kind of computer at the +same time, by placing the object files for each system in their own +directory. To do this, you can use GNU ‘make’. ‘cd’ to the directory +where you want the object files and executables to go and run the +‘configure’ script. ‘configure’ automatically checks for the source +code in the directory that ‘configure’ is in and in ‘..’. This is known +as a “VPATH” build. + + With a non-GNU ‘make’, it is safer to compile the package for one +system at a time in the source code directory. After you have installed +the package for one system, use ‘make distclean’ before reconfiguring +for another system. + + Some platforms, notably macOS, support “fat” or “universal” binaries, +where a single binary can execute on different architectures. On these +platforms you can configure and compile just once, with options specific +to that platform. + +Installation Names +================== + + By default, ‘make install’ installs the package’s commands under +‘/usr/local/bin’, include files under ‘/usr/local/include’, etc. You +can specify an installation prefix other than ‘/usr/local’ by giving +‘configure’ the option ‘--prefix=PREFIX’, where PREFIX must be an +absolute file name. + + You can specify separate installation prefixes for +architecture-specific files and architecture-independent files. If you +pass the option ‘--exec-prefix=PREFIX’ to ‘configure’, the package uses +PREFIX as the prefix for installing programs and libraries. +Documentation and other data files still use the regular prefix. + + In addition, if you use an unusual directory layout you can give +options like ‘--bindir=DIR’ to specify different values for particular +kinds of files. Run ‘configure --help’ for a list of the directories +you can set and what kinds of files go in them. In general, the default +for these options is expressed in terms of ‘${prefix}’, so that +specifying just ‘--prefix’ will affect all of the other directory +specifications that were not explicitly provided. + + The most portable way to affect installation locations is to pass the +correct locations to ‘configure’; however, many packages provide one or +both of the following shortcuts of passing variable assignments to the +‘make install’ command line to change installation locations without +having to reconfigure or recompile. + + The first method involves providing an override variable for each +affected directory. For example, ‘make install +prefix=/alternate/directory’ will choose an alternate location for all +directory configuration variables that were expressed in terms of +‘${prefix}’. Any directories that were specified during ‘configure’, +but not in terms of ‘${prefix}’, must each be overridden at install time +for the entire installation to be relocated. The approach of makefile +variable overrides for each directory variable is required by the GNU +Coding Standards, and ideally causes no recompilation. However, some +platforms have known limitations with the semantics of shared libraries +that end up requiring recompilation when using this method, particularly +noticeable in packages that use GNU Libtool. + + The second method involves providing the ‘DESTDIR’ variable. For +example, ‘make install DESTDIR=/alternate/directory’ will prepend +‘/alternate/directory’ before all installation names. The approach of +‘DESTDIR’ overrides is not required by the GNU Coding Standards, and +does not work on platforms that have drive letters. On the other hand, +it does better at avoiding recompilation issues, and works well even +when some directory options were not specified in terms of ‘${prefix}’ +at ‘configure’ time. + +Optional Features +================= + + If the package supports it, you can cause programs to be installed +with an extra prefix or suffix on their names by giving ‘configure’ the +option ‘--program-prefix=PREFIX’ or ‘--program-suffix=SUFFIX’. + + Some packages pay attention to ‘--enable-FEATURE’ and +‘--disable-FEATURE’ options to ‘configure’, where FEATURE indicates an +optional part of the package. They may also pay attention to +‘--with-PACKAGE’ and ‘--without-PACKAGE’ options, where PACKAGE is +something like ‘gnu-ld’. ‘./configure --help’ should mention the +‘--enable-...’ and ‘--with-...’ options that the package recognizes. + + Some packages offer the ability to configure how verbose the +execution of ‘make’ will be. For these packages, running ‘./configure +--enable-silent-rules’ sets the default to minimal output, which can be +overridden with ‘make V=1’; while running ‘./configure +--disable-silent-rules’ sets the default to verbose, which can be +overridden with ‘make V=0’. + +Specifying a System Type +======================== + + By default ‘configure’ builds for the current system. To create +binaries that can run on a different system type, specify a +‘--host=TYPE’ option along with compiler variables that specify how to +generate object code for TYPE. For example, to create binaries intended +to run on a 64-bit ARM processor: + + ./configure --host=aarch64-linux-gnu \ + CC=aarch64-linux-gnu-gcc \ + CXX=aarch64-linux-gnu-g++ + +If done on a machine that can execute these binaries (e.g., via +‘qemu-aarch64’, ‘$QEMU_LD_PREFIX’, and Linux’s ‘binfmt_misc’ +capability), the build behaves like a native build. Otherwise it is a +cross-build: ‘configure’ will make cross-compilation guesses instead of +running test programs, and ‘make check’ will not work. + + A system type can either be a short name like ‘mingw64’, or a +canonical name like ‘x86_64-pc-linux-gnu’. Canonical names have the +form CPU-COMPANY-SYSTEM where SYSTEM is either OS or KERNEL-OS. To +canonicalize and validate a system type, you can run the command +‘config.sub’, which is often squirreled away in a subdirectory like +‘build-aux’. For example: + + $ build-aux/config.sub arm64-linux + aarch64-unknown-linux-gnu + $ build-aux/config.sub riscv-lnx + Invalid configuration 'riscv-lnx': OS 'lnx' not recognized + +You can look at the ‘config.sub’ file to see which types are recognized. +If the file is absent, this package does not need the system type. + + If ‘configure’ fails with the diagnostic “cannot guess build type”. +‘config.sub’ did not recognize your system’s type. In this case, first +fetch the newest versions of these files from the GNU config package +(https://savannah.gnu.org/projects/config). If that fixes things, +please report it to the maintainers of the package containing +‘configure’. Otherwise, you can try the configure option ‘--build=TYPE’ +where TYPE comes close to your system type; also, please report the +problem to . + + For more details about configuring system types, see the Autoconf +documentation. + +Sharing Defaults +================ + + If you want to set default values for ‘configure’ scripts to share, +you can create a site shell script called ‘config.site’ that gives +default values for variables like ‘CC’, ‘cache_file’, and ‘prefix’. +‘configure’ looks for ‘PREFIX/share/config.site’ if it exists, then +‘PREFIX/etc/config.site’ if it exists. Or, you can set the +‘CONFIG_SITE’ environment variable to the location of the site script. +A warning: not all ‘configure’ scripts look for a site script. + +Defining Variables +================== + + Variables not defined in a site shell script can be set in the +environment passed to ‘configure’. However, some packages may run +configure again during the build, and the customized values of these +variables may be lost. In order to avoid this problem, you should set +them in the ‘configure’ command line, using ‘VAR=value’. For example: + + ./configure CC=/usr/local2/bin/gcc + +causes the specified ‘gcc’ to be used as the C compiler (unless it is +overridden in the site shell script). + +Unfortunately, this technique does not work for ‘CONFIG_SHELL’ due to an +Autoconf limitation. Until the limitation is lifted, you can use this +workaround: + + CONFIG_SHELL=/bin/bash ./configure CONFIG_SHELL=/bin/bash + +‘configure’ Invocation +====================== + + ‘configure’ recognizes the following options to control how it +operates. + +‘--help’ +‘-h’ + Print a summary of all of the options to ‘configure’, and exit. + +‘--help=short’ +‘--help=recursive’ + Print a summary of the options unique to this package’s + ‘configure’, and exit. The ‘short’ variant lists options used only + in the top level, while the ‘recursive’ variant lists options also + present in any nested packages. + +‘--version’ +‘-V’ + Print the version of Autoconf used to generate the ‘configure’ + script, and exit. + +‘--cache-file=FILE’ + Enable the cache: use and save the results of the tests in FILE, + traditionally ‘config.cache’. FILE defaults to ‘/dev/null’ to + disable caching. + +‘--config-cache’ +‘-C’ + Alias for ‘--cache-file=config.cache’. + +‘--srcdir=DIR’ + Look for the package’s source code in directory DIR. Usually + ‘configure’ can determine that directory automatically. + +‘--prefix=DIR’ + Use DIR as the installation prefix. See “Installation Names” for + more details, including other options available for fine-tuning the + installation locations. + +‘--host=TYPE’ + Build binaries for system TYPE. See “Specifying a System Type”. + +‘--enable-FEATURE’ +‘--disable-FEATURE’ + Enable or disable the optional FEATURE. See “Optional Features”. + +‘--with-PACKAGE’ +‘--without-PACKAGE’ + Use or omit PACKAGE when building. See “Optional Features”. + +‘--quiet’ +‘--silent’ +‘-q’ + Do not print messages saying which checks are being made. To + suppress all normal output, redirect it to ‘/dev/null’ (any error + messages will still be shown). + +‘--no-create’ +‘-n’ + Run the configure checks, but stop before creating any output + files. + +‘configure’ also recognizes several environment variables, and accepts +some other, less widely useful, options. Run ‘configure --help’ for +more details. + +Copyright notice +================ + + Copyright © 1994–1996, 1999–2002, 2004–2017, 2020–2024 Free Software +Foundation, Inc. + + Copying and distribution of this file, with or without modification, +are permitted in any medium without royalty provided the copyright +notice and this notice are preserved. This file is offered as-is, +without warranty of any kind. diff --git a/Makefile.am b/Makefile.am new file mode 100644 index 0000000..5577e66 --- /dev/null +++ b/Makefile.am @@ -0,0 +1,26 @@ +# NOTE: There are currently only a few language features like bitfields, +# which require C99. +AM_CFLAGS = -std=c99 -Wall -Wsign-compare + +# OpenWatcom build system (for MS-DOS port) +EXTRA_DIST = Makefile.wcc + +EXTRA_DIST += README.md README.OLD + +bin_PROGRAMS = teco +teco_SOURCES = tecbuf.c teccmd.c tecdebug.c tecdisp.c tecexec.c \ + tecmem.c teco.c teco.h tecparse.c tecparse.h \ + tecstate.c tecterm.c tecundo.c tecvms.h + +# +# Doxygen processing (do not install or distribute) +# +devdoc : doc/html/ + +.PHONY: doc/html/ +doc/html/ : doc/Doxyfile + -rm -rf doc/html/ + @DOXYGEN@ doc/Doxyfile + +clean-local: + -rm -rf doc/html/ diff --git a/NEWS b/NEWS new file mode 100644 index 0000000..e69de29 diff --git a/README.md b/README.md index 3547d5c..c8dd506 100644 --- a/README.md +++ b/README.md @@ -28,7 +28,8 @@ version published by Paul Cantrell in 2007 * Fixed echoing control characters on the end of lines. Or was it broken only at the end of the document? Anyway, it's fixed now. -* Code documentation using [Doxygen](https://doxygen.nl/) +* Code documentation using [Doxygen](https://doxygen.nl/). + Build with `make devdoc`. * Added the [original manual](https://www.copters.com/teco.html) to the repository (`doc/TECO Manual V4.html`). diff --git a/config.h.in b/config.h.in deleted file mode 100644 index 4303b5a..0000000 --- a/config.h.in +++ /dev/null @@ -1,224 +0,0 @@ -/* config.h.in. Generated from configure.ac by autoheader. */ - -/* Define to 1 if the `closedir' function returns void instead of `int'. */ -#undef CLOSEDIR_VOID - -/* Define to 1 if `TIOCGWINSZ' requires . */ -#undef GWINSZ_IN_SYS_IOCTL - -/* Define to 1 if you have the `alarm' function. */ -#undef HAVE_ALARM - -/* Define to 1 if you have the `bzero' function. */ -#undef HAVE_BZERO - -/* Define to 1 if you have the header file. */ -#undef HAVE_CTYPE_H - -/* Define to 1 if you have the declaration of `cfgetospeed', and to 0 if you - don't. */ -#undef HAVE_DECL_CFGETOSPEED - -/* Define to 1 if you have the header file, and it defines `DIR'. - */ -#undef HAVE_DIRENT_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_ERRNO_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_FCNTL_H - -/* Define to 1 if you have the `fork' function. */ -#undef HAVE_FORK - -/* Define to 1 if you have the header file. */ -#undef HAVE_INTTYPES_H - -/* Define to 1 if you have the `ncurses' library (-lncurses). */ -#undef HAVE_LIBNCURSES - -/* Define to 1 if you have the `termcap' library (-ltermcap). */ -#undef HAVE_LIBTERMCAP - -/* Define to 1 if you have the `terminfo' library (-lterminfo). */ -#undef HAVE_LIBTERMINFO - -/* Define to 1 if you support file names longer than 14 characters. */ -#undef HAVE_LONG_FILE_NAMES - -/* Define to 1 if your system has a GNU libc compatible `malloc' function, and - to 0 otherwise. */ -#undef HAVE_MALLOC - -/* Define to 1 if you have the header file. */ -#undef HAVE_MEMORY_H - -/* Define to 1 if you have the `mkdir' function. */ -#undef HAVE_MKDIR - -/* Define to 1 if you have the header file, and it defines `DIR'. */ -#undef HAVE_NDIR_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_POLL_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_PWD_H - -/* Define to 1 if you have the `sbrk' function. */ -#undef HAVE_SBRK - -/* Define to 1 if you have the `select' function. */ -#undef HAVE_SELECT - -/* Define to 1 if you have the header file. */ -#undef HAVE_SGTTY_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SIGNAL_H - -/* Define to 1 if `stat' has the bug that it succeeds when given the - zero-length file name argument. */ -#undef HAVE_STAT_EMPTY_STRING_BUG - -/* Define to 1 if you have the header file. */ -#undef HAVE_STDINT_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_STDIO_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_STDLIB_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_STRINGS_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_STRING_H - -/* Define to 1 if `c_cflag' is member of `struct termios'. */ -#undef HAVE_STRUCT_TERMIOS_C_CFLAG - -/* Define to 1 if `c_ospeed' is member of `struct termios'. */ -#undef HAVE_STRUCT_TERMIOS_C_OSPEED - -/* Define to 1 if `sg_ospeed' is member of `struct termios'. */ -#undef HAVE_STRUCT_TERMIOS_SG_OSPEED - -/* Define to 1 if you have the header file, and it defines `DIR'. - */ -#undef HAVE_SYS_DIR_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_FILE_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_FILIO_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_IOCTL_H - -/* Define to 1 if you have the header file, and it defines `DIR'. - */ -#undef HAVE_SYS_NDIR_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_PARAM_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_SELECT_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_SOCKET_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_STAT_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_TYPES_H - -/* Define to 1 if you have that is POSIX.1 compatible. */ -#undef HAVE_SYS_WAIT_H - -/* Define to 1 if you have the `tcgetattr' function. */ -#undef HAVE_TCGETATTR - -/* Define to 1 if you have the `tcsetattr' function. */ -#undef HAVE_TCSETATTR - -/* Define to 1 if you have the header file. */ -#undef HAVE_TERMCAP_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_TERMIOS_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_TERMIO_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_UNISTD_H - -/* Define to 1 if you have the `vfork' function. */ -#undef HAVE_VFORK - -/* Define to 1 if you have the header file. */ -#undef HAVE_VFORK_H - -/* Define to 1 if `fork' works. */ -#undef HAVE_WORKING_FORK - -/* Define to 1 if `vfork' works. */ -#undef HAVE_WORKING_VFORK - -/* Define to 1 if `lstat' dereferences a symlink specified with a trailing - slash. */ -#undef LSTAT_FOLLOWS_SLASHED_SYMLINK - -/* Define to the address where bug reports for this package should be sent. */ -#undef PACKAGE_BUGREPORT - -/* Define to the full name of this package. */ -#undef PACKAGE_NAME - -/* Define to the full name and version of this package. */ -#undef PACKAGE_STRING - -/* Define to the one symbol short name of this package. */ -#undef PACKAGE_TARNAME - -/* Define to the version of this package. */ -#undef PACKAGE_VERSION - -/* Define as the return type of signal handlers (`int' or `void'). */ -#undef RETSIGTYPE - -/* Define to the type of arg 1 for `select'. */ -#undef SELECT_TYPE_ARG1 - -/* Define to the type of args 2, 3 and 4 for `select'. */ -#undef SELECT_TYPE_ARG234 - -/* Define to the type of arg 5 for `select'. */ -#undef SELECT_TYPE_ARG5 - -/* Define to 1 if the `S_IS*' macros in do not work properly. */ -#undef STAT_MACROS_BROKEN - -/* Define to 1 if you have the ANSI C header files. */ -#undef STDC_HEADERS - -/* Define to 1 if you can safely include both and . */ -#undef TIME_WITH_SYS_TIME - -/* Define to empty if `const' does not conform to ANSI C. */ -#undef const - -/* Define to rpl_malloc if the replacement function should be used. */ -#undef malloc - -/* Define to `int' if does not define. */ -#undef pid_t - -/* Define as `fork' if `vfork' does not work. */ -#undef vfork diff --git a/configure b/configure deleted file mode 100755 index 76c8dbd..0000000 --- a/configure +++ /dev/null @@ -1,6770 +0,0 @@ -#! /bin/sh -# Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.57 for VTECO 6.4. -# -# Report bugs to . -# -# Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002 -# Free Software Foundation, Inc. -# This configure script is free software; the Free Software Foundation -# gives unlimited permission to copy, distribute and modify it. -## --------------------- ## -## M4sh Initialization. ## -## --------------------- ## - -# Be Bourne compatible -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' -elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then - set -o posix -fi - -# Support unset when possible. -if (FOO=FOO; unset FOO) >/dev/null 2>&1; then - as_unset=unset -else - as_unset=false -fi - - -# Work around bugs in pre-3.0 UWIN ksh. -$as_unset ENV MAIL MAILPATH -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -for as_var in \ - LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ - LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ - LC_TELEPHONE LC_TIME -do - if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then - eval $as_var=C; export $as_var - else - $as_unset $as_var - fi -done - -# Required to use basename. -if expr a : '\(a\)' >/dev/null 2>&1; then - as_expr=expr -else - as_expr=false -fi - -if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - - -# Name of the executable. -as_me=`$as_basename "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)$' \| \ - . : '\(.\)' 2>/dev/null || -echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } - /^X\/\(\/\/\)$/{ s//\1/; q; } - /^X\/\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - - -# PATH needs CR, and LINENO needs CR and PATH. -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi - - - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" || { - # Find who we are. Look in the path if we contain no path at all - # relative or not. - case $0 in - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done - - ;; - esac - # We did not find ourselves, most probably we were run as `sh COMMAND' - # in which case we are not to be found in the path. - if test "x$as_myself" = x; then - as_myself=$0 - fi - if test ! -f "$as_myself"; then - { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 - { (exit 1); exit 1; }; } - fi - case $CONFIG_SHELL in - '') - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for as_base in sh bash ksh sh5; do - case $as_dir in - /*) - if ("$as_dir/$as_base" -c ' - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then - $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } - $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } - CONFIG_SHELL=$as_dir/$as_base - export CONFIG_SHELL - exec "$CONFIG_SHELL" "$0" ${1+"$@"} - fi;; - esac - done -done -;; - esac - - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line before each line; the second 'sed' does the real - # work. The second script uses 'N' to pair each line-number line - # with the numbered line, and appends trailing '-' during - # substitution so that $LINENO is not a special case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) - sed '=' <$as_myself | - sed ' - N - s,$,-, - : loop - s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, - t loop - s,-$,, - s,^['$as_cr_digits']*\n,, - ' >$as_me.lineno && - chmod +x $as_me.lineno || - { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 - { (exit 1); exit 1; }; } - - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensible to this). - . ./$as_me.lineno - # Exit status is that of the last command. - exit -} - - -case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in - *c*,-n*) ECHO_N= ECHO_C=' -' ECHO_T=' ' ;; - *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; - *) ECHO_N= ECHO_C='\c' ECHO_T= ;; -esac - -if expr a : '\(a\)' >/dev/null 2>&1; then - as_expr=expr -else - as_expr=false -fi - -rm -f conf$$ conf$$.exe conf$$.file -echo >conf$$.file -if ln -s conf$$.file conf$$ 2>/dev/null; then - # We could just check for DJGPP; but this test a) works b) is more generic - # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). - if test -f conf$$.exe; then - # Don't use ln at all; we don't have any links - as_ln_s='cp -p' - else - as_ln_s='ln -s' - fi -elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln -else - as_ln_s='cp -p' -fi -rm -f conf$$ conf$$.exe conf$$.file - -if mkdir -p . 2>/dev/null; then - as_mkdir_p=: -else - as_mkdir_p=false -fi - -as_executable_p="test -f" - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g" - - -# IFS -# We need space, tab and new line, in precisely that order. -as_nl=' -' -IFS=" $as_nl" - -# CDPATH. -$as_unset CDPATH - - -# Name of the host. -# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, -# so uname gets run too. -ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` - -exec 6>&1 - -# -# Initializations. -# -ac_default_prefix=/usr/local -ac_config_libobj_dir=. -cross_compiling=no -subdirs= -MFLAGS= -MAKEFLAGS= -SHELL=${CONFIG_SHELL-/bin/sh} - -# Maximum number of lines to put in a shell here document. -# This variable seems obsolete. It should probably be removed, and -# only ac_max_sed_lines should be used. -: ${ac_max_here_lines=38} - -# Identity of this package. -PACKAGE_NAME='VTECO' -PACKAGE_TARNAME='vteco' -PACKAGE_VERSION='6.4' -PACKAGE_STRING='VTECO 6.4' -PACKAGE_BUGREPORT='paul@copters.com' - -ac_unique_file="poll.h" -# Factoring default headers for most tests. -ac_includes_default="\ -#include -#if HAVE_SYS_TYPES_H -# include -#endif -#if HAVE_SYS_STAT_H -# include -#endif -#if STDC_HEADERS -# include -# include -#else -# if HAVE_STDLIB_H -# include -# endif -#endif -#if HAVE_STRING_H -# if !STDC_HEADERS && HAVE_MEMORY_H -# include -# endif -# include -#endif -#if HAVE_STRINGS_H -# include -#endif -#if HAVE_INTTYPES_H -# include -#else -# if HAVE_STDINT_H -# include -# endif -#endif -#if HAVE_UNISTD_H -# include -#endif" - -ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS GCC CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT CXX CXXFLAGS ac_ct_CXX CXXCPP EGREP LIBOBJS LTLIBOBJS' -ac_subst_files='' - -# Initialize some variables set by options. -ac_init_help= -ac_init_version=false -# The variables have the same names as the options, with -# dashes changed to underlines. -cache_file=/dev/null -exec_prefix=NONE -no_create= -no_recursion= -prefix=NONE -program_prefix=NONE -program_suffix=NONE -program_transform_name=s,x,x, -silent= -site= -srcdir= -verbose= -x_includes=NONE -x_libraries=NONE - -# Installation directory options. -# These are left unexpanded so users can "make install exec_prefix=/foo" -# and all the variables that are supposed to be based on exec_prefix -# by default will actually change. -# Use braces instead of parens because sh, perl, etc. also accept them. -bindir='${exec_prefix}/bin' -sbindir='${exec_prefix}/sbin' -libexecdir='${exec_prefix}/libexec' -datadir='${prefix}/share' -sysconfdir='${prefix}/etc' -sharedstatedir='${prefix}/com' -localstatedir='${prefix}/var' -libdir='${exec_prefix}/lib' -includedir='${prefix}/include' -oldincludedir='/usr/include' -infodir='${prefix}/info' -mandir='${prefix}/man' - -ac_prev= -for ac_option -do - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then - eval "$ac_prev=\$ac_option" - ac_prev= - continue - fi - - ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` - - # Accept the important Cygnus configure options, so we can diagnose typos. - - case $ac_option in - - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; - -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) - bindir=$ac_optarg ;; - - -build | --build | --buil | --bui | --bu) - ac_prev=build_alias ;; - -build=* | --build=* | --buil=* | --bui=* | --bu=*) - build_alias=$ac_optarg ;; - - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) - cache_file=$ac_optarg ;; - - --config-cache | -C) - cache_file=config.cache ;; - - -datadir | --datadir | --datadi | --datad | --data | --dat | --da) - ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ - | --da=*) - datadir=$ac_optarg ;; - - -disable-* | --disable-*) - ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid feature name: $ac_feature" >&2 - { (exit 1); exit 1; }; } - ac_feature=`echo $ac_feature | sed 's/-/_/g'` - eval "enable_$ac_feature=no" ;; - - -enable-* | --enable-*) - ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid feature name: $ac_feature" >&2 - { (exit 1); exit 1; }; } - ac_feature=`echo $ac_feature | sed 's/-/_/g'` - case $ac_option in - *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; - *) ac_optarg=yes ;; - esac - eval "enable_$ac_feature='$ac_optarg'" ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ - | --exec | --exe | --ex) - ac_prev=exec_prefix ;; - -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ - | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ - | --exec=* | --exe=* | --ex=*) - exec_prefix=$ac_optarg ;; - - -gas | --gas | --ga | --g) - # Obsolete; use --with-gas. - with_gas=yes ;; - - -help | --help | --hel | --he | -h) - ac_init_help=long ;; - -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) - ac_init_help=recursive ;; - -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) - ac_init_help=short ;; - - -host | --host | --hos | --ho) - ac_prev=host_alias ;; - -host=* | --host=* | --hos=* | --ho=*) - host_alias=$ac_optarg ;; - - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; - -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ - | --includ=* | --inclu=* | --incl=* | --inc=*) - includedir=$ac_optarg ;; - - -infodir | --infodir | --infodi | --infod | --info | --inf) - ac_prev=infodir ;; - -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) - infodir=$ac_optarg ;; - - -libdir | --libdir | --libdi | --libd) - ac_prev=libdir ;; - -libdir=* | --libdir=* | --libdi=* | --libd=*) - libdir=$ac_optarg ;; - - -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ - | --libexe | --libex | --libe) - ac_prev=libexecdir ;; - -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ - | --libexe=* | --libex=* | --libe=*) - libexecdir=$ac_optarg ;; - - -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst \ - | --locals | --local | --loca | --loc | --lo) - ac_prev=localstatedir ;; - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* \ - | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) - localstatedir=$ac_optarg ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) - ac_prev=mandir ;; - -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) - mandir=$ac_optarg ;; - - -nfp | --nfp | --nf) - # Obsolete; use --without-fp. - with_fp=no ;; - - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c | -n) - no_create=yes ;; - - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) - no_recursion=yes ;; - - -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ - | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ - | --oldin | --oldi | --old | --ol | --o) - ac_prev=oldincludedir ;; - -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ - | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ - | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) - oldincludedir=$ac_optarg ;; - - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix=$ac_optarg ;; - - -program-prefix | --program-prefix | --program-prefi | --program-pref \ - | --program-pre | --program-pr | --program-p) - ac_prev=program_prefix ;; - -program-prefix=* | --program-prefix=* | --program-prefi=* \ - | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) - program_prefix=$ac_optarg ;; - - -program-suffix | --program-suffix | --program-suffi | --program-suff \ - | --program-suf | --program-su | --program-s) - ac_prev=program_suffix ;; - -program-suffix=* | --program-suffix=* | --program-suffi=* \ - | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) - program_suffix=$ac_optarg ;; - - -program-transform-name | --program-transform-name \ - | --program-transform-nam | --program-transform-na \ - | --program-transform-n | --program-transform- \ - | --program-transform | --program-transfor \ - | --program-transfo | --program-transf \ - | --program-trans | --program-tran \ - | --progr-tra | --program-tr | --program-t) - ac_prev=program_transform_name ;; - -program-transform-name=* | --program-transform-name=* \ - | --program-transform-nam=* | --program-transform-na=* \ - | --program-transform-n=* | --program-transform-=* \ - | --program-transform=* | --program-transfor=* \ - | --program-transfo=* | --program-transf=* \ - | --program-trans=* | --program-tran=* \ - | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name=$ac_optarg ;; - - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - silent=yes ;; - - -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) - ac_prev=sbindir ;; - -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ - | --sbi=* | --sb=*) - sbindir=$ac_optarg ;; - - -sharedstatedir | --sharedstatedir | --sharedstatedi \ - | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ - | --sharedst | --shareds | --shared | --share | --shar \ - | --sha | --sh) - ac_prev=sharedstatedir ;; - -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ - | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ - | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ - | --sha=* | --sh=*) - sharedstatedir=$ac_optarg ;; - - -site | --site | --sit) - ac_prev=site ;; - -site=* | --site=* | --sit=*) - site=$ac_optarg ;; - - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - srcdir=$ac_optarg ;; - - -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ - | --syscon | --sysco | --sysc | --sys | --sy) - ac_prev=sysconfdir ;; - -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ - | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) - sysconfdir=$ac_optarg ;; - - -target | --target | --targe | --targ | --tar | --ta | --t) - ac_prev=target_alias ;; - -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) - target_alias=$ac_optarg ;; - - -v | -verbose | --verbose | --verbos | --verbo | --verb) - verbose=yes ;; - - -version | --version | --versio | --versi | --vers | -V) - ac_init_version=: ;; - - -with-* | --with-*) - ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid package name: $ac_package" >&2 - { (exit 1); exit 1; }; } - ac_package=`echo $ac_package| sed 's/-/_/g'` - case $ac_option in - *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; - *) ac_optarg=yes ;; - esac - eval "with_$ac_package='$ac_optarg'" ;; - - -without-* | --without-*) - ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid package name: $ac_package" >&2 - { (exit 1); exit 1; }; } - ac_package=`echo $ac_package | sed 's/-/_/g'` - eval "with_$ac_package=no" ;; - - --x) - # Obsolete; use --with-x. - with_x=yes ;; - - -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ - | --x-incl | --x-inc | --x-in | --x-i) - ac_prev=x_includes ;; - -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ - | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) - x_includes=$ac_optarg ;; - - -x-libraries | --x-libraries | --x-librarie | --x-librari \ - | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) - ac_prev=x_libraries ;; - -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries=$ac_optarg ;; - - -*) { echo "$as_me: error: unrecognized option: $ac_option -Try \`$0 --help' for more information." >&2 - { (exit 1); exit 1; }; } - ;; - - *=*) - ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` - # Reject names that are not valid shell variable names. - expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 - { (exit 1); exit 1; }; } - ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` - eval "$ac_envvar='$ac_optarg'" - export $ac_envvar ;; - - *) - # FIXME: should be removed in autoconf 3.0. - echo "$as_me: WARNING: you should use --build, --host, --target" >&2 - expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && - echo "$as_me: WARNING: invalid host type: $ac_option" >&2 - : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} - ;; - - esac -done - -if test -n "$ac_prev"; then - ac_option=--`echo $ac_prev | sed 's/_/-/g'` - { echo "$as_me: error: missing argument to $ac_option" >&2 - { (exit 1); exit 1; }; } -fi - -# Be sure to have absolute paths. -for ac_var in exec_prefix prefix -do - eval ac_val=$`echo $ac_var` - case $ac_val in - [\\/$]* | ?:[\\/]* | NONE | '' ) ;; - *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 - { (exit 1); exit 1; }; };; - esac -done - -# Be sure to have absolute paths. -for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ - localstatedir libdir includedir oldincludedir infodir mandir -do - eval ac_val=$`echo $ac_var` - case $ac_val in - [\\/$]* | ?:[\\/]* ) ;; - *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 - { (exit 1); exit 1; }; };; - esac -done - -# There might be people who depend on the old broken behavior: `$host' -# used to hold the argument of --host etc. -# FIXME: To remove some day. -build=$build_alias -host=$host_alias -target=$target_alias - -# FIXME: To remove some day. -if test "x$host_alias" != x; then - if test "x$build_alias" = x; then - cross_compiling=maybe - echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. - If a cross compiler is detected then cross compile mode will be used." >&2 - elif test "x$build_alias" != "x$host_alias"; then - cross_compiling=yes - fi -fi - -ac_tool_prefix= -test -n "$host_alias" && ac_tool_prefix=$host_alias- - -test "$silent" = yes && exec 6>/dev/null - - -# Find the source files, if location was not specified. -if test -z "$srcdir"; then - ac_srcdir_defaulted=yes - # Try the directory containing this script, then its parent. - ac_confdir=`(dirname "$0") 2>/dev/null || -$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$0" : 'X\(//\)[^/]' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$0" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - srcdir=$ac_confdir - if test ! -r $srcdir/$ac_unique_file; then - srcdir=.. - fi -else - ac_srcdir_defaulted=no -fi -if test ! -r $srcdir/$ac_unique_file; then - if test "$ac_srcdir_defaulted" = yes; then - { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 - { (exit 1); exit 1; }; } - else - { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 - { (exit 1); exit 1; }; } - fi -fi -(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || - { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 - { (exit 1); exit 1; }; } -srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` -ac_env_build_alias_set=${build_alias+set} -ac_env_build_alias_value=$build_alias -ac_cv_env_build_alias_set=${build_alias+set} -ac_cv_env_build_alias_value=$build_alias -ac_env_host_alias_set=${host_alias+set} -ac_env_host_alias_value=$host_alias -ac_cv_env_host_alias_set=${host_alias+set} -ac_cv_env_host_alias_value=$host_alias -ac_env_target_alias_set=${target_alias+set} -ac_env_target_alias_value=$target_alias -ac_cv_env_target_alias_set=${target_alias+set} -ac_cv_env_target_alias_value=$target_alias -ac_env_CC_set=${CC+set} -ac_env_CC_value=$CC -ac_cv_env_CC_set=${CC+set} -ac_cv_env_CC_value=$CC -ac_env_CFLAGS_set=${CFLAGS+set} -ac_env_CFLAGS_value=$CFLAGS -ac_cv_env_CFLAGS_set=${CFLAGS+set} -ac_cv_env_CFLAGS_value=$CFLAGS -ac_env_LDFLAGS_set=${LDFLAGS+set} -ac_env_LDFLAGS_value=$LDFLAGS -ac_cv_env_LDFLAGS_set=${LDFLAGS+set} -ac_cv_env_LDFLAGS_value=$LDFLAGS -ac_env_CPPFLAGS_set=${CPPFLAGS+set} -ac_env_CPPFLAGS_value=$CPPFLAGS -ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} -ac_cv_env_CPPFLAGS_value=$CPPFLAGS -ac_env_CXX_set=${CXX+set} -ac_env_CXX_value=$CXX -ac_cv_env_CXX_set=${CXX+set} -ac_cv_env_CXX_value=$CXX -ac_env_CXXFLAGS_set=${CXXFLAGS+set} -ac_env_CXXFLAGS_value=$CXXFLAGS -ac_cv_env_CXXFLAGS_set=${CXXFLAGS+set} -ac_cv_env_CXXFLAGS_value=$CXXFLAGS -ac_env_CXXCPP_set=${CXXCPP+set} -ac_env_CXXCPP_value=$CXXCPP -ac_cv_env_CXXCPP_set=${CXXCPP+set} -ac_cv_env_CXXCPP_value=$CXXCPP - -# -# Report the --help message. -# -if test "$ac_init_help" = "long"; then - # Omit some internal or obsolete options to make the list less imposing. - # This message is too long to be a string in the A/UX 3.1 sh. - cat <<_ACEOF -\`configure' configures VTECO 6.4 to adapt to many kinds of systems. - -Usage: $0 [OPTION]... [VAR=VALUE]... - -To assign environment variables (e.g., CC, CFLAGS...), specify them as -VAR=VALUE. See below for descriptions of some of the useful variables. - -Defaults for the options are specified in brackets. - -Configuration: - -h, --help display this help and exit - --help=short display options specific to this package - --help=recursive display the short help of all the included packages - -V, --version display version information and exit - -q, --quiet, --silent do not print \`checking...' messages - --cache-file=FILE cache test results in FILE [disabled] - -C, --config-cache alias for \`--cache-file=config.cache' - -n, --no-create do not create output files - --srcdir=DIR find the sources in DIR [configure dir or \`..'] - -_ACEOF - - cat <<_ACEOF -Installation directories: - --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [PREFIX] - -By default, \`make install' will install all the files in -\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify -an installation prefix other than \`$ac_default_prefix' using \`--prefix', -for instance \`--prefix=\$HOME'. - -For better control, use the options below. - -Fine tuning of the installation directories: - --bindir=DIR user executables [EPREFIX/bin] - --sbindir=DIR system admin executables [EPREFIX/sbin] - --libexecdir=DIR program executables [EPREFIX/libexec] - --datadir=DIR read-only architecture-independent data [PREFIX/share] - --sysconfdir=DIR read-only single-machine data [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] - --localstatedir=DIR modifiable single-machine data [PREFIX/var] - --libdir=DIR object code libraries [EPREFIX/lib] - --includedir=DIR C header files [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc [/usr/include] - --infodir=DIR info documentation [PREFIX/info] - --mandir=DIR man documentation [PREFIX/man] -_ACEOF - - cat <<\_ACEOF -_ACEOF -fi - -if test -n "$ac_init_help"; then - case $ac_init_help in - short | recursive ) echo "Configuration of VTECO 6.4:";; - esac - cat <<\_ACEOF - -Some influential environment variables: - CC C compiler command - CFLAGS C compiler flags - LDFLAGS linker flags, e.g. -L if you have libraries in a - nonstandard directory - CPPFLAGS C/C++ preprocessor flags, e.g. -I if you have - headers in a nonstandard directory - CXX C++ compiler command - CXXFLAGS C++ compiler flags - CXXCPP C++ preprocessor - -Use these variables to override the choices made by `configure' or to help -it to find libraries and programs with nonstandard names/locations. - -Report bugs to . -_ACEOF -fi - -if test "$ac_init_help" = "recursive"; then - # If there are subdirs, report their specific --help. - ac_popdir=`pwd` - for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue - test -d $ac_dir || continue - ac_builddir=. - -if test "$ac_dir" != .; then - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A "../" for each directory in $ac_dir_suffix. - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` -else - ac_dir_suffix= ac_top_builddir= -fi - -case $srcdir in - .) # No --srcdir option. We are building in place. - ac_srcdir=. - if test -z "$ac_top_builddir"; then - ac_top_srcdir=. - else - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` - fi ;; - [\\/]* | ?:[\\/]* ) # Absolute path. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir ;; - *) # Relative path. - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_builddir$srcdir ;; -esac -# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be -# absolute. -ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` -ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd` -ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` -ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` - - cd $ac_dir - # Check for guested configure; otherwise get Cygnus style configure. - if test -f $ac_srcdir/configure.gnu; then - echo - $SHELL $ac_srcdir/configure.gnu --help=recursive - elif test -f $ac_srcdir/configure; then - echo - $SHELL $ac_srcdir/configure --help=recursive - elif test -f $ac_srcdir/configure.ac || - test -f $ac_srcdir/configure.in; then - echo - $ac_configure --help - else - echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 - fi - cd $ac_popdir - done -fi - -test -n "$ac_init_help" && exit 0 -if $ac_init_version; then - cat <<\_ACEOF -VTECO configure 6.4 -generated by GNU Autoconf 2.57 - -Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002 -Free Software Foundation, Inc. -This configure script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it. -_ACEOF - exit 0 -fi -exec 5>config.log -cat >&5 <<_ACEOF -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. - -It was created by VTECO $as_me 6.4, which was -generated by GNU Autoconf 2.57. Invocation command line was - - $ $0 $@ - -_ACEOF -{ -cat <<_ASUNAME -## --------- ## -## Platform. ## -## --------- ## - -hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` - -/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -hostinfo = `(hostinfo) 2>/dev/null || echo unknown` -/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` -/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` - -_ASUNAME - -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - echo "PATH: $as_dir" -done - -} >&5 - -cat >&5 <<_ACEOF - - -## ----------- ## -## Core tests. ## -## ----------- ## - -_ACEOF - - -# Keep a trace of the command line. -# Strip out --no-create and --no-recursion so they do not pile up. -# Strip out --silent because we don't want to record it for future runs. -# Also quote any args containing shell meta-characters. -# Make two passes to allow for proper duplicate-argument suppression. -ac_configure_args= -ac_configure_args0= -ac_configure_args1= -ac_sep= -ac_must_keep_next=false -for ac_pass in 1 2 -do - for ac_arg - do - case $ac_arg in - -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - continue ;; - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) - ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - case $ac_pass in - 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; - 2) - ac_configure_args1="$ac_configure_args1 '$ac_arg'" - if test $ac_must_keep_next = true; then - ac_must_keep_next=false # Got value, back to normal. - else - case $ac_arg in - *=* | --config-cache | -C | -disable-* | --disable-* \ - | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ - | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ - | -with-* | --with-* | -without-* | --without-* | --x) - case "$ac_configure_args0 " in - "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; - esac - ;; - -* ) ac_must_keep_next=true ;; - esac - fi - ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" - # Get rid of the leading space. - ac_sep=" " - ;; - esac - done -done -$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } -$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } - -# When interrupted or exit'd, cleanup temporary files, and complete -# config.log. We remove comments because anyway the quotes in there -# would cause problems or look ugly. -# WARNING: Be sure not to use single quotes in there, as some shells, -# such as our DU 5.0 friend, will then `close' the trap. -trap 'exit_status=$? - # Save into config.log some information that might help in debugging. - { - echo - - cat <<\_ASBOX -## ---------------- ## -## Cache variables. ## -## ---------------- ## -_ASBOX - echo - # The following way of writing the cache mishandles newlines in values, -{ - (set) 2>&1 | - case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in - *ac_space=\ *) - sed -n \ - "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" - ;; - *) - sed -n \ - "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" - ;; - esac; -} - echo - - cat <<\_ASBOX -## ----------------- ## -## Output variables. ## -## ----------------- ## -_ASBOX - echo - for ac_var in $ac_subst_vars - do - eval ac_val=$`echo $ac_var` - echo "$ac_var='"'"'$ac_val'"'"'" - done | sort - echo - - if test -n "$ac_subst_files"; then - cat <<\_ASBOX -## ------------- ## -## Output files. ## -## ------------- ## -_ASBOX - echo - for ac_var in $ac_subst_files - do - eval ac_val=$`echo $ac_var` - echo "$ac_var='"'"'$ac_val'"'"'" - done | sort - echo - fi - - if test -s confdefs.h; then - cat <<\_ASBOX -## ----------- ## -## confdefs.h. ## -## ----------- ## -_ASBOX - echo - sed "/^$/d" confdefs.h | sort - echo - fi - test "$ac_signal" != 0 && - echo "$as_me: caught signal $ac_signal" - echo "$as_me: exit $exit_status" - } >&5 - rm -f core core.* *.core && - rm -rf conftest* confdefs* conf$$* $ac_clean_files && - exit $exit_status - ' 0 -for ac_signal in 1 2 13 15; do - trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal -done -ac_signal=0 - -# confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -rf conftest* confdefs.h -# AIX cpp loses on an empty file, so make sure it contains at least a newline. -echo >confdefs.h - -# Predefined preprocessor variables. - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_NAME "$PACKAGE_NAME" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_TARNAME "$PACKAGE_TARNAME" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_VERSION "$PACKAGE_VERSION" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_STRING "$PACKAGE_STRING" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" -_ACEOF - - -# Let the site file select an alternate cache file if it wants to. -# Prefer explicitly selected file to automatically selected ones. -if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" - fi -fi -for ac_site_file in $CONFIG_SITE; do - if test -r "$ac_site_file"; then - { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 -echo "$as_me: loading site script $ac_site_file" >&6;} - sed 's/^/| /' "$ac_site_file" >&5 - . "$ac_site_file" - fi -done - -if test -r "$cache_file"; then - # Some versions of bash will fail to source /dev/null (special - # files actually), so we avoid doing that. - if test -f "$cache_file"; then - { echo "$as_me:$LINENO: loading cache $cache_file" >&5 -echo "$as_me: loading cache $cache_file" >&6;} - case $cache_file in - [\\/]* | ?:[\\/]* ) . $cache_file;; - *) . ./$cache_file;; - esac - fi -else - { echo "$as_me:$LINENO: creating cache $cache_file" >&5 -echo "$as_me: creating cache $cache_file" >&6;} - >$cache_file -fi - -# Check that the precious variables saved in the cache have kept the same -# value. -ac_cache_corrupted=false -for ac_var in `(set) 2>&1 | - sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do - eval ac_old_set=\$ac_cv_env_${ac_var}_set - eval ac_new_set=\$ac_env_${ac_var}_set - eval ac_old_val="\$ac_cv_env_${ac_var}_value" - eval ac_new_val="\$ac_env_${ac_var}_value" - case $ac_old_set,$ac_new_set in - set,) - { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,set) - { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 -echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,);; - *) - if test "x$ac_old_val" != "x$ac_new_val"; then - { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 -echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} - { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 -echo "$as_me: former value: $ac_old_val" >&2;} - { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 -echo "$as_me: current value: $ac_new_val" >&2;} - ac_cache_corrupted=: - fi;; - esac - # Pass precious variables to config.status. - if test "$ac_new_set" = set; then - case $ac_new_val in - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) - ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; - *) ac_arg=$ac_var=$ac_new_val ;; - esac - case " $ac_configure_args " in - *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; - esac - fi -done -if $ac_cache_corrupted; then - { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 -echo "$as_me: error: changes in the environment can compromise the build" >&2;} - { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 -echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} - { (exit 1); exit 1; }; } -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - - - - - - - - - - - - - - - - - - - - - - - - - -GCC=GCC - - - ac_config_headers="$ac_config_headers config.h" - - -# Checks for programs. -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. -set dummy ${ac_tool_prefix}gcc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="gcc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - CC=$ac_ct_CC -else - CC="$ac_cv_prog_CC" -fi - -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -set dummy ${ac_tool_prefix}cc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - CC=$ac_ct_CC -else - CC="$ac_cv_prog_CC" -fi - -fi -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - ac_prog_rejected=no -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# != 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" - fi -fi -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - for ac_prog in cl - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - test -n "$CC" && break - done -fi -if test -z "$CC"; then - ac_ct_CC=$CC - for ac_prog in cl -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - test -n "$ac_ct_CC" && break -done - - CC=$ac_ct_CC -fi - -fi - - -test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH -See \`config.log' for more details." >&5 -echo "$as_me: error: no acceptable C compiler found in \$PATH -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } - -# Provide some information about the compiler. -echo "$as_me:$LINENO:" \ - "checking for C compiler version" >&5 -ac_compiler=`set X $ac_compile; echo $2` -{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 - (eval $ac_compiler --version &5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 - (eval $ac_compiler -v &5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 - (eval $ac_compiler -V &5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } - -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files a.out a.exe b.out" -# Try to create an executable without -o first, disregard a.out. -# It will help us diagnose broken compilers, and finding out an intuition -# of exeext. -echo "$as_me:$LINENO: checking for C compiler default output" >&5 -echo $ECHO_N "checking for C compiler default output... $ECHO_C" >&6 -ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` -if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 - (eval $ac_link_default) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - # Find the output, starting from the most likely. This scheme is -# not robust to junk in `.', hence go to wildcards (a.*) only as a last -# resort. - -# Be careful to initialize this variable, since it used to be cached. -# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. -ac_cv_exeext= -# b.out is created by i960 compilers. -for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out -do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) - ;; - conftest.$ac_ext ) - # This is the source file. - ;; - [ab].out ) - # We found the default executable, but exeext='' is most - # certainly right. - break;; - *.* ) - ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - # FIXME: I believe we export ac_cv_exeext for Libtool, - # but it would be cool to find out if it's true. Does anybody - # maintain Libtool? --akim. - export ac_cv_exeext - break;; - * ) - break;; - esac -done -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { echo "$as_me:$LINENO: error: C compiler cannot create executables -See \`config.log' for more details." >&5 -echo "$as_me: error: C compiler cannot create executables -See \`config.log' for more details." >&2;} - { (exit 77); exit 77; }; } -fi - -ac_exeext=$ac_cv_exeext -echo "$as_me:$LINENO: result: $ac_file" >&5 -echo "${ECHO_T}$ac_file" >&6 - -# Check the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -echo "$as_me:$LINENO: checking whether the C compiler works" >&5 -echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6 -# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 -# If not cross compiling, check that we can run a simple program. -if test "$cross_compiling" != yes; then - if { ac_try='./$ac_file' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - cross_compiling=no - else - if test "$cross_compiling" = maybe; then - cross_compiling=yes - else - { { echo "$as_me:$LINENO: error: cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } - fi - fi -fi -echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - -rm -f a.out a.exe conftest$ac_cv_exeext b.out -ac_clean_files=$ac_clean_files_save -# Check the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 -echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 -echo "$as_me:$LINENO: result: $cross_compiling" >&5 -echo "${ECHO_T}$cross_compiling" >&6 - -echo "$as_me:$LINENO: checking for suffix of executables" >&5 -echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - # If both `conftest.exe' and `conftest' are `present' (well, observable) -# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will -# work properly (i.e., refer to `conftest.exe'), while it won't with -# `rm'. -for ac_file in conftest.exe conftest conftest.*; do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; - *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - export ac_cv_exeext - break;; - * ) break;; - esac -done -else - { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -fi - -rm -f conftest$ac_cv_exeext -echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 -echo "${ECHO_T}$ac_cv_exeext" >&6 - -rm -f conftest.$ac_ext -EXEEXT=$ac_cv_exeext -ac_exeext=$EXEEXT -echo "$as_me:$LINENO: checking for suffix of object files" >&5 -echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 -if test "${ac_cv_objext+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.o conftest.obj -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; - *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` - break;; - esac -done -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot compute suffix of object files: cannot compile -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -fi - -rm -f conftest.$ac_cv_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 -echo "${ECHO_T}$ac_cv_objext" >&6 -OBJEXT=$ac_cv_objext -ac_objext=$OBJEXT -echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 -echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 -if test "${ac_cv_c_compiler_gnu+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_compiler_gnu=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_compiler_gnu=no -fi -rm -f conftest.$ac_objext conftest.$ac_ext -ac_cv_c_compiler_gnu=$ac_compiler_gnu - -fi -echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 -echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 -GCC=`test $ac_compiler_gnu = yes && echo yes` -ac_test_CFLAGS=${CFLAGS+set} -ac_save_CFLAGS=$CFLAGS -CFLAGS="-g" -echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 -echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 -if test "${ac_cv_prog_cc_g+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_prog_cc_g=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_prog_cc_g=no -fi -rm -f conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 -echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 -if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi -else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi -fi -echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 -echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 -if test "${ac_cv_prog_cc_stdc+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_cv_prog_cc_stdc=no -ac_save_CC=$CC -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#include -#include -#include -/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ -struct buf { int x; }; -FILE * (*rcsopen) (struct buf *, struct stat *, int); -static char *e (p, i) - char **p; - int i; -{ - return p[i]; -} -static char *f (char * (*g) (char **, int), char **p, ...) -{ - char *s; - va_list v; - va_start (v,p); - s = g (p, va_arg (v,int)); - va_end (v); - return s; -} -int test (int i, double x); -struct s1 {int (*f) (int a);}; -struct s2 {int (*f) (double a);}; -int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); -int argc; -char **argv; -int -main () -{ -return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; - ; - return 0; -} -_ACEOF -# Don't try gcc -ansi; that turns off useful extensions and -# breaks some systems' header files. -# AIX -qlanglvl=ansi -# Ultrix and OSF/1 -std1 -# HP-UX 10.20 and later -Ae -# HP-UX older versions -Aa -D_HPUX_SOURCE -# SVR4 -Xc -D__EXTENSIONS__ -for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -do - CC="$ac_save_CC $ac_arg" - rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_prog_cc_stdc=$ac_arg -break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.$ac_objext -done -rm -f conftest.$ac_ext conftest.$ac_objext -CC=$ac_save_CC - -fi - -case "x$ac_cv_prog_cc_stdc" in - x|xno) - echo "$as_me:$LINENO: result: none needed" >&5 -echo "${ECHO_T}none needed" >&6 ;; - *) - echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 -echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 - CC="$CC $ac_cv_prog_cc_stdc" ;; -esac - -# Some people use a C++ compiler to compile C. Since we use `exit', -# in C++ we need to declare it. In case someone uses the same compiler -# for both compiling C and C++ we need to have the C++ compiler decide -# the declaration of exit, since it's the most demanding environment. -cat >conftest.$ac_ext <<_ACEOF -#ifndef __cplusplus - choke me -#endif -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - for ac_declaration in \ - ''\ - '#include ' \ - 'extern "C" void std::exit (int) throw (); using std::exit;' \ - 'extern "C" void std::exit (int); using std::exit;' \ - 'extern "C" void exit (int) throw ();' \ - 'extern "C" void exit (int);' \ - 'void exit (int);' -do - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -$ac_declaration -int -main () -{ -exit (42); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -continue -fi -rm -f conftest.$ac_objext conftest.$ac_ext - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_declaration -int -main () -{ -exit (42); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.$ac_objext conftest.$ac_ext -done -rm -f conftest* -if test -n "$ac_declaration"; then - echo '#ifdef __cplusplus' >>confdefs.h - echo $ac_declaration >>confdefs.h - echo '#endif' >>confdefs.h -fi - -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.$ac_objext conftest.$ac_ext -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu -if test -n "$ac_tool_prefix"; then - for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CXX+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CXX"; then - ac_cv_prog_CXX="$CXX" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -CXX=$ac_cv_prog_CXX -if test -n "$CXX"; then - echo "$as_me:$LINENO: result: $CXX" >&5 -echo "${ECHO_T}$CXX" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - test -n "$CXX" && break - done -fi -if test -z "$CXX"; then - ac_ct_CXX=$CXX - for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_CXX"; then - ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CXX="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -ac_ct_CXX=$ac_cv_prog_ac_ct_CXX -if test -n "$ac_ct_CXX"; then - echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5 -echo "${ECHO_T}$ac_ct_CXX" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - test -n "$ac_ct_CXX" && break -done -test -n "$ac_ct_CXX" || ac_ct_CXX="g++" - - CXX=$ac_ct_CXX -fi - - -# Provide some information about the compiler. -echo "$as_me:$LINENO:" \ - "checking for C++ compiler version" >&5 -ac_compiler=`set X $ac_compile; echo $2` -{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 - (eval $ac_compiler --version &5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 - (eval $ac_compiler -v &5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 - (eval $ac_compiler -V &5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } - -echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5 -echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6 -if test "${ac_cv_cxx_compiler_gnu+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_compiler_gnu=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_compiler_gnu=no -fi -rm -f conftest.$ac_objext conftest.$ac_ext -ac_cv_cxx_compiler_gnu=$ac_compiler_gnu - -fi -echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5 -echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6 -GXX=`test $ac_compiler_gnu = yes && echo yes` -ac_test_CXXFLAGS=${CXXFLAGS+set} -ac_save_CXXFLAGS=$CXXFLAGS -CXXFLAGS="-g" -echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5 -echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6 -if test "${ac_cv_prog_cxx_g+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_prog_cxx_g=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_prog_cxx_g=no -fi -rm -f conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5 -echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6 -if test "$ac_test_CXXFLAGS" = set; then - CXXFLAGS=$ac_save_CXXFLAGS -elif test $ac_cv_prog_cxx_g = yes; then - if test "$GXX" = yes; then - CXXFLAGS="-g -O2" - else - CXXFLAGS="-g" - fi -else - if test "$GXX" = yes; then - CXXFLAGS="-O2" - else - CXXFLAGS= - fi -fi -for ac_declaration in \ - ''\ - '#include ' \ - 'extern "C" void std::exit (int) throw (); using std::exit;' \ - 'extern "C" void std::exit (int); using std::exit;' \ - 'extern "C" void exit (int) throw ();' \ - 'extern "C" void exit (int);' \ - 'void exit (int);' -do - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -$ac_declaration -int -main () -{ -exit (42); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -continue -fi -rm -f conftest.$ac_objext conftest.$ac_ext - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_declaration -int -main () -{ -exit (42); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.$ac_objext conftest.$ac_ext -done -rm -f conftest* -if test -n "$ac_declaration"; then - echo '#ifdef __cplusplus' >>confdefs.h - echo $ac_declaration >>confdefs.h - echo '#endif' >>confdefs.h -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - - -# Checks for libraries. -# FIXME: Replace `main' with a function in `-ltermcap': - - -echo "$as_me:$LINENO: checking for tgetstr in -ltermcap" >&5 -echo $ECHO_N "checking for tgetstr in -ltermcap... $ECHO_C" >&6 -if test "${ac_cv_lib_termcap_tgetstr+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ltermcap $LIBS" -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char tgetstr (); -int -main () -{ -tgetstr (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_termcap_tgetstr=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_termcap_tgetstr=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_termcap_tgetstr" >&5 -echo "${ECHO_T}$ac_cv_lib_termcap_tgetstr" >&6 -if test $ac_cv_lib_termcap_tgetstr = yes; then - cat >>confdefs.h <<_ACEOF -#define HAVE_LIBTERMCAP 1 -_ACEOF - - LIBS="-ltermcap $LIBS" - -fi - - -echo "$as_me:$LINENO: checking for setupterm in -lterminfo" >&5 -echo $ECHO_N "checking for setupterm in -lterminfo... $ECHO_C" >&6 -if test "${ac_cv_lib_terminfo_setupterm+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lterminfo $LIBS" -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char setupterm (); -int -main () -{ -setupterm (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_terminfo_setupterm=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_terminfo_setupterm=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_terminfo_setupterm" >&5 -echo "${ECHO_T}$ac_cv_lib_terminfo_setupterm" >&6 -if test $ac_cv_lib_terminfo_setupterm = yes; then - cat >>confdefs.h <<_ACEOF -#define HAVE_LIBTERMINFO 1 -_ACEOF - - LIBS="-lterminfo $LIBS" - -fi - - -echo "$as_me:$LINENO: checking for tgetstr in -lncurses" >&5 -echo $ECHO_N "checking for tgetstr in -lncurses... $ECHO_C" >&6 -if test "${ac_cv_lib_ncurses_tgetstr+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lncurses $LIBS" -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char tgetstr (); -int -main () -{ -tgetstr (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_ncurses_tgetstr=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_ncurses_tgetstr=no -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_ncurses_tgetstr" >&5 -echo "${ECHO_T}$ac_cv_lib_ncurses_tgetstr" >&6 -if test $ac_cv_lib_ncurses_tgetstr = yes; then - cat >>confdefs.h <<_ACEOF -#define HAVE_LIBNCURSES 1 -_ACEOF - - LIBS="-lncurses $LIBS" - -fi - - -# Checks for header files. - - - - - -ac_header_dirent=no -for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h; do - as_ac_Header=`echo "ac_cv_header_dirent_$ac_hdr" | $as_tr_sh` -echo "$as_me:$LINENO: checking for $ac_hdr that defines DIR" >&5 -echo $ECHO_N "checking for $ac_hdr that defines DIR... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#include <$ac_hdr> - -int -main () -{ -if ((DIR *) 0) -return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - eval "$as_ac_Header=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -eval "$as_ac_Header=no" -fi -rm -f conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_hdr" | $as_tr_cpp` 1 -_ACEOF - -ac_header_dirent=$ac_hdr; break -fi - -done -# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix. -if test $ac_header_dirent = dirent.h; then - echo "$as_me:$LINENO: checking for library containing opendir" >&5 -echo $ECHO_N "checking for library containing opendir... $ECHO_C" >&6 -if test "${ac_cv_search_opendir+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_func_search_save_LIBS=$LIBS -ac_cv_search_opendir=no -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char opendir (); -int -main () -{ -opendir (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_search_opendir="none required" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -if test "$ac_cv_search_opendir" = no; then - for ac_lib in dir; do - LIBS="-l$ac_lib $ac_func_search_save_LIBS" - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char opendir (); -int -main () -{ -opendir (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_search_opendir="-l$ac_lib" -break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext - done -fi -LIBS=$ac_func_search_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_search_opendir" >&5 -echo "${ECHO_T}$ac_cv_search_opendir" >&6 -if test "$ac_cv_search_opendir" != no; then - test "$ac_cv_search_opendir" = "none required" || LIBS="$ac_cv_search_opendir $LIBS" - -fi - -else - echo "$as_me:$LINENO: checking for library containing opendir" >&5 -echo $ECHO_N "checking for library containing opendir... $ECHO_C" >&6 -if test "${ac_cv_search_opendir+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_func_search_save_LIBS=$LIBS -ac_cv_search_opendir=no -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char opendir (); -int -main () -{ -opendir (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_search_opendir="none required" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -if test "$ac_cv_search_opendir" = no; then - for ac_lib in x; do - LIBS="-l$ac_lib $ac_func_search_save_LIBS" - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char opendir (); -int -main () -{ -opendir (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_search_opendir="-l$ac_lib" -break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext - done -fi -LIBS=$ac_func_search_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_search_opendir" >&5 -echo "${ECHO_T}$ac_cv_search_opendir" >&6 -if test "$ac_cv_search_opendir" != no; then - test "$ac_cv_search_opendir" = "none required" || LIBS="$ac_cv_search_opendir $LIBS" - -fi - -fi - -ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu -echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5 -echo $ECHO_N "checking how to run the C++ preprocessor... $ECHO_C" >&6 -if test -z "$CXXCPP"; then - if test "${ac_cv_prog_CXXCPP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - # Double quotes because CXXCPP needs to be expanded - for CXXCPP in "$CXX -E" "/lib/cpp" - do - ac_preproc_ok=false -for ac_cxx_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_cxx_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.$ac_ext - - # OK, works on sane cases. Now check whether non-existent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_cxx_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - # Broken: success on invalid input. -continue -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - break -fi - - done - ac_cv_prog_CXXCPP=$CXXCPP - -fi - CXXCPP=$ac_cv_prog_CXXCPP -else - ac_cv_prog_CXXCPP=$CXXCPP -fi -echo "$as_me:$LINENO: result: $CXXCPP" >&5 -echo "${ECHO_T}$CXXCPP" >&6 -ac_preproc_ok=false -for ac_cxx_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_cxx_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.$ac_ext - - # OK, works on sane cases. Now check whether non-existent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_cxx_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - # Broken: success on invalid input. -continue -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - : -else - { { echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check -See \`config.log' for more details." >&5 -echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -fi - -ac_ext=cc -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - - -echo "$as_me:$LINENO: checking for egrep" >&5 -echo $ECHO_N "checking for egrep... $ECHO_C" >&6 -if test "${ac_cv_prog_egrep+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if echo a | (grep -E '(a|b)') >/dev/null 2>&1 - then ac_cv_prog_egrep='grep -E' - else ac_cv_prog_egrep='egrep' - fi -fi -echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 -echo "${ECHO_T}$ac_cv_prog_egrep" >&6 - EGREP=$ac_cv_prog_egrep - - -echo "$as_me:$LINENO: checking for ANSI C header files" >&5 -echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 -if test "${ac_cv_header_stdc+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#include -#include -#include - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_header_stdc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_header_stdc=no -fi -rm -f conftest.$ac_objext conftest.$ac_ext - -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then - : -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then - : -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then - : -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#if ((' ' & 0x0FF) == 0x020) -# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#else -# define ISLOWER(c) \ - (('a' <= (c) && (c) <= 'i') \ - || ('j' <= (c) && (c) <= 'r') \ - || ('s' <= (c) && (c) <= 'z')) -# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) -#endif - -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -int -main () -{ - int i; - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) - exit(2); - exit (0); -} -_ACEOF -rm -f conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : -else - echo "$as_me: program exited with status $ac_status" >&5 -echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -ac_cv_header_stdc=no -fi -rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi -fi -fi -echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 -echo "${ECHO_T}$ac_cv_header_stdc" >&6 -if test $ac_cv_header_stdc = yes; then - -cat >>confdefs.h <<\_ACEOF -#define STDC_HEADERS 1 -_ACEOF - -fi - -echo "$as_me:$LINENO: checking whether stat file-mode macros are broken" >&5 -echo $ECHO_N "checking whether stat file-mode macros are broken... $ECHO_C" >&6 -if test "${ac_cv_header_stat_broken+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#include - -#if defined(S_ISBLK) && defined(S_IFDIR) -# if S_ISBLK (S_IFDIR) -You lose. -# endif -#endif - -#if defined(S_ISBLK) && defined(S_IFCHR) -# if S_ISBLK (S_IFCHR) -You lose. -# endif -#endif - -#if defined(S_ISLNK) && defined(S_IFREG) -# if S_ISLNK (S_IFREG) -You lose. -# endif -#endif - -#if defined(S_ISSOCK) && defined(S_IFREG) -# if S_ISSOCK (S_IFREG) -You lose. -# endif -#endif - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "You lose" >/dev/null 2>&1; then - ac_cv_header_stat_broken=yes -else - ac_cv_header_stat_broken=no -fi -rm -f conftest* - -fi -echo "$as_me:$LINENO: result: $ac_cv_header_stat_broken" >&5 -echo "${ECHO_T}$ac_cv_header_stat_broken" >&6 -if test $ac_cv_header_stat_broken = yes; then - -cat >>confdefs.h <<\_ACEOF -#define STAT_MACROS_BROKEN 1 -_ACEOF - -fi - -echo "$as_me:$LINENO: checking whether termios.h defines TIOCGWINSZ" >&5 -echo $ECHO_N "checking whether termios.h defines TIOCGWINSZ... $ECHO_C" >&6 -if test "${ac_cv_sys_tiocgwinsz_in_termios_h+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#include -#ifdef TIOCGWINSZ - yes -#endif - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "yes" >/dev/null 2>&1; then - ac_cv_sys_tiocgwinsz_in_termios_h=yes -else - ac_cv_sys_tiocgwinsz_in_termios_h=no -fi -rm -f conftest* - -fi -echo "$as_me:$LINENO: result: $ac_cv_sys_tiocgwinsz_in_termios_h" >&5 -echo "${ECHO_T}$ac_cv_sys_tiocgwinsz_in_termios_h" >&6 - -if test $ac_cv_sys_tiocgwinsz_in_termios_h != yes; then - echo "$as_me:$LINENO: checking whether sys/ioctl.h defines TIOCGWINSZ" >&5 -echo $ECHO_N "checking whether sys/ioctl.h defines TIOCGWINSZ... $ECHO_C" >&6 -if test "${ac_cv_sys_tiocgwinsz_in_sys_ioctl_h+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#include -#ifdef TIOCGWINSZ - yes -#endif - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "yes" >/dev/null 2>&1; then - ac_cv_sys_tiocgwinsz_in_sys_ioctl_h=yes -else - ac_cv_sys_tiocgwinsz_in_sys_ioctl_h=no -fi -rm -f conftest* - -fi -echo "$as_me:$LINENO: result: $ac_cv_sys_tiocgwinsz_in_sys_ioctl_h" >&5 -echo "${ECHO_T}$ac_cv_sys_tiocgwinsz_in_sys_ioctl_h" >&6 - - if test $ac_cv_sys_tiocgwinsz_in_sys_ioctl_h = yes; then - -cat >>confdefs.h <<\_ACEOF -#define GWINSZ_IN_SYS_IOCTL 1 -_ACEOF - - fi -fi - -echo "$as_me:$LINENO: checking for sys/wait.h that is POSIX.1 compatible" >&5 -echo $ECHO_N "checking for sys/wait.h that is POSIX.1 compatible... $ECHO_C" >&6 -if test "${ac_cv_header_sys_wait_h+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#include -#ifndef WEXITSTATUS -# define WEXITSTATUS(stat_val) ((unsigned)(stat_val) >> 8) -#endif -#ifndef WIFEXITED -# define WIFEXITED(stat_val) (((stat_val) & 255) == 0) -#endif - -int -main () -{ - int s; - wait (&s); - s = WIFEXITED (s) ? WEXITSTATUS (s) : 1; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_header_sys_wait_h=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_header_sys_wait_h=no -fi -rm -f conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_header_sys_wait_h" >&5 -echo "${ECHO_T}$ac_cv_header_sys_wait_h" >&6 -if test $ac_cv_header_sys_wait_h = yes; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_SYS_WAIT_H 1 -_ACEOF - -fi - -# On IRIX 5.3, sys/types and inttypes.h are conflicting. - - - - - - - - - -for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ - inttypes.h stdint.h unistd.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default - -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - eval "$as_ac_Header=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -eval "$as_ac_Header=no" -fi -rm -f conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - - - - - - - - - - - - - - - - - - - - - -for ac_header in fcntl.h sgtty.h stdlib.h string.h sys/select.h sys/filio.h sys/file.h sys/ioctl.h sys/param.h sys/socket.h termio.h termios.h unistd.h ctype.h stdio.h errno.h signal.h pwd.h poll.h termcap.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -else - # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_header_compiler=no -fi -rm -f conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 - -# Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_cxx_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc in - yes:no ) - { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - ( - cat <<\_ASBOX -## ------------------------------------ ## -## Report this to bug-autoconf@gnu.org. ## -## ------------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; - no:yes ) - { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - ( - cat <<\_ASBOX -## ------------------------------------ ## -## Report this to bug-autoconf@gnu.org. ## -## ------------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - eval "$as_ac_Header=$ac_header_preproc" -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 - -fi -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - -# Checks for typedefs, structures, and compiler characteristics. -echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5 -echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6 -if test "${ac_cv_c_const+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ -/* FIXME: Include the comments suggested by Paul. */ -#ifndef __cplusplus - /* Ultrix mips cc rejects this. */ - typedef int charset[2]; - const charset x; - /* SunOS 4.1.1 cc rejects this. */ - char const *const *ccp; - char **p; - /* NEC SVR4.0.2 mips cc rejects this. */ - struct point {int x, y;}; - static struct point const zero = {0,0}; - /* AIX XL C 1.02.0.0 rejects this. - It does not let you subtract one const X* pointer from another in - an arm of an if-expression whose if-part is not a constant - expression */ - const char *g = "string"; - ccp = &g + (g ? g-g : 0); - /* HPUX 7.0 cc rejects these. */ - ++ccp; - p = (char**) ccp; - ccp = (char const *const *) p; - { /* SCO 3.2v4 cc rejects this. */ - char *t; - char const *s = 0 ? (char *) 0 : (char const *) 0; - - *t++ = 0; - } - { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ - int x[] = {25, 17}; - const int *foo = &x[0]; - ++foo; - } - { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ - typedef const int *iptr; - iptr p = 0; - ++p; - } - { /* AIX XL C 1.02.0.0 rejects this saying - "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ - struct s { int j; const int *ap[3]; }; - struct s *b; b->j = 5; - } - { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ - const int foo = 10; - } -#endif - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_c_const=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_c_const=no -fi -rm -f conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5 -echo "${ECHO_T}$ac_cv_c_const" >&6 -if test $ac_cv_c_const = no; then - -cat >>confdefs.h <<\_ACEOF -#define const -_ACEOF - -fi - -echo "$as_me:$LINENO: checking whether time.h and sys/time.h may both be included" >&5 -echo $ECHO_N "checking whether time.h and sys/time.h may both be included... $ECHO_C" >&6 -if test "${ac_cv_header_time+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#include -#include - -int -main () -{ -if ((struct tm *) 0) -return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_header_time=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_header_time=no -fi -rm -f conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_header_time" >&5 -echo "${ECHO_T}$ac_cv_header_time" >&6 -if test $ac_cv_header_time = yes; then - -cat >>confdefs.h <<\_ACEOF -#define TIME_WITH_SYS_TIME 1 -_ACEOF - -fi - -echo "$as_me:$LINENO: checking for struct termios.c_ospeed" >&5 -echo $ECHO_N "checking for struct termios.c_ospeed... $ECHO_C" >&6 -if test "${ac_cv_member_struct_termios_c_ospeed+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include - -int -main () -{ -static struct termios ac_aggr; -if (ac_aggr.c_ospeed) -return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_member_struct_termios_c_ospeed=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include - -int -main () -{ -static struct termios ac_aggr; -if (sizeof ac_aggr.c_ospeed) -return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_member_struct_termios_c_ospeed=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_member_struct_termios_c_ospeed=no -fi -rm -f conftest.$ac_objext conftest.$ac_ext -fi -rm -f conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_member_struct_termios_c_ospeed" >&5 -echo "${ECHO_T}$ac_cv_member_struct_termios_c_ospeed" >&6 -if test $ac_cv_member_struct_termios_c_ospeed = yes; then - -cat >>confdefs.h <<_ACEOF -#define HAVE_STRUCT_TERMIOS_C_OSPEED 1 -_ACEOF - - -fi -echo "$as_me:$LINENO: checking for struct termios.sg_ospeed" >&5 -echo $ECHO_N "checking for struct termios.sg_ospeed... $ECHO_C" >&6 -if test "${ac_cv_member_struct_termios_sg_ospeed+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include - -int -main () -{ -static struct termios ac_aggr; -if (ac_aggr.sg_ospeed) -return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_member_struct_termios_sg_ospeed=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include - -int -main () -{ -static struct termios ac_aggr; -if (sizeof ac_aggr.sg_ospeed) -return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_member_struct_termios_sg_ospeed=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_member_struct_termios_sg_ospeed=no -fi -rm -f conftest.$ac_objext conftest.$ac_ext -fi -rm -f conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_member_struct_termios_sg_ospeed" >&5 -echo "${ECHO_T}$ac_cv_member_struct_termios_sg_ospeed" >&6 -if test $ac_cv_member_struct_termios_sg_ospeed = yes; then - -cat >>confdefs.h <<_ACEOF -#define HAVE_STRUCT_TERMIOS_SG_OSPEED 1 -_ACEOF - - -fi -echo "$as_me:$LINENO: checking for struct termios.c_cflag" >&5 -echo $ECHO_N "checking for struct termios.c_cflag... $ECHO_C" >&6 -if test "${ac_cv_member_struct_termios_c_cflag+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include - -int -main () -{ -static struct termios ac_aggr; -if (ac_aggr.c_cflag) -return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_member_struct_termios_c_cflag=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include - -int -main () -{ -static struct termios ac_aggr; -if (sizeof ac_aggr.c_cflag) -return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_member_struct_termios_c_cflag=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_member_struct_termios_c_cflag=no -fi -rm -f conftest.$ac_objext conftest.$ac_ext -fi -rm -f conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_member_struct_termios_c_cflag" >&5 -echo "${ECHO_T}$ac_cv_member_struct_termios_c_cflag" >&6 -if test $ac_cv_member_struct_termios_c_cflag = yes; then - -cat >>confdefs.h <<_ACEOF -#define HAVE_STRUCT_TERMIOS_C_CFLAG 1 -_ACEOF - - -fi - - -# Checks for library functions. -echo "$as_me:$LINENO: checking whether closedir returns void" >&5 -echo $ECHO_N "checking whether closedir returns void... $ECHO_C" >&6 -if test "${ac_cv_func_closedir_void+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test "$cross_compiling" = yes; then - ac_cv_func_closedir_void=yes -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header_dirent> -#ifndef __cplusplus -int closedir (); -#endif - -int -main () -{ -exit (closedir (opendir (".")) != 0); - ; - return 0; -} -_ACEOF -rm -f conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_closedir_void=no -else - echo "$as_me: program exited with status $ac_status" >&5 -echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -ac_cv_func_closedir_void=yes -fi -rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi -fi -echo "$as_me:$LINENO: result: $ac_cv_func_closedir_void" >&5 -echo "${ECHO_T}$ac_cv_func_closedir_void" >&6 -if test $ac_cv_func_closedir_void = yes; then - -cat >>confdefs.h <<\_ACEOF -#define CLOSEDIR_VOID 1 -_ACEOF - -fi - -echo "$as_me:$LINENO: checking for pid_t" >&5 -echo $ECHO_N "checking for pid_t... $ECHO_C" >&6 -if test "${ac_cv_type_pid_t+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -if ((pid_t *) 0) - return 0; -if (sizeof (pid_t)) - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_type_pid_t=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_type_pid_t=no -fi -rm -f conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_type_pid_t" >&5 -echo "${ECHO_T}$ac_cv_type_pid_t" >&6 -if test $ac_cv_type_pid_t = yes; then - : -else - -cat >>confdefs.h <<_ACEOF -#define pid_t int -_ACEOF - -fi - - - -for ac_header in unistd.h vfork.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -else - # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_header_compiler=no -fi -rm -f conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 - -# Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_cxx_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc in - yes:no ) - { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - ( - cat <<\_ASBOX -## ------------------------------------ ## -## Report this to bug-autoconf@gnu.org. ## -## ------------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; - no:yes ) - { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - ( - cat <<\_ASBOX -## ------------------------------------ ## -## Report this to bug-autoconf@gnu.org. ## -## ------------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - eval "$as_ac_Header=$ac_header_preproc" -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 - -fi -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - - -for ac_func in fork vfork -do -as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` -echo "$as_me:$LINENO: checking for $ac_func" >&5 -echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 -if eval "test \"\${$as_ac_var+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ -#ifdef __STDC__ -# include -#else -# include -#endif -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_$ac_func) || defined (__stub___$ac_func) -choke me -#else -char (*f) () = $ac_func; -#endif -#ifdef __cplusplus -} -#endif - -int -main () -{ -return f != $ac_func; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - eval "$as_ac_var=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -eval "$as_ac_var=no" -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 -if test `eval echo '${'$as_ac_var'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 -_ACEOF - -fi -done - -if test "x$ac_cv_func_fork" = xyes; then - echo "$as_me:$LINENO: checking for working fork" >&5 -echo $ECHO_N "checking for working fork... $ECHO_C" >&6 -if test "${ac_cv_func_fork_works+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test "$cross_compiling" = yes; then - ac_cv_func_fork_works=cross -else - cat >conftest.$ac_ext <<_ACEOF -/* By Ruediger Kuhlmann. */ - #include - #if HAVE_UNISTD_H - # include - #endif - /* Some systems only have a dummy stub for fork() */ - int main () - { - if (fork() < 0) - exit (1); - exit (0); - } -_ACEOF -rm -f conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_fork_works=yes -else - echo "$as_me: program exited with status $ac_status" >&5 -echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -ac_cv_func_fork_works=no -fi -rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi -fi -echo "$as_me:$LINENO: result: $ac_cv_func_fork_works" >&5 -echo "${ECHO_T}$ac_cv_func_fork_works" >&6 - -else - ac_cv_func_fork_works=$ac_cv_func_fork -fi -if test "x$ac_cv_func_fork_works" = xcross; then - case $host in - *-*-amigaos* | *-*-msdosdjgpp*) - # Override, as these systems have only a dummy fork() stub - ac_cv_func_fork_works=no - ;; - *) - ac_cv_func_fork_works=yes - ;; - esac - { echo "$as_me:$LINENO: WARNING: result $ac_cv_func_fork_works guessed because of cross compilation" >&5 -echo "$as_me: WARNING: result $ac_cv_func_fork_works guessed because of cross compilation" >&2;} -fi -ac_cv_func_vfork_works=$ac_cv_func_vfork -if test "x$ac_cv_func_vfork" = xyes; then - echo "$as_me:$LINENO: checking for working vfork" >&5 -echo $ECHO_N "checking for working vfork... $ECHO_C" >&6 -if test "${ac_cv_func_vfork_works+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test "$cross_compiling" = yes; then - ac_cv_func_vfork_works=cross -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Thanks to Paul Eggert for this test. */ -#include -#include -#include -#include -#include -#if HAVE_UNISTD_H -# include -#endif -#if HAVE_VFORK_H -# include -#endif -/* On some sparc systems, changes by the child to local and incoming - argument registers are propagated back to the parent. The compiler - is told about this with #include , but some compilers - (e.g. gcc -O) don't grok . Test for this by using a - static variable whose address is put into a register that is - clobbered by the vfork. */ -static void -#ifdef __cplusplus -sparc_address_test (int arg) -# else -sparc_address_test (arg) int arg; -#endif -{ - static pid_t child; - if (!child) { - child = vfork (); - if (child < 0) { - perror ("vfork"); - _exit(2); - } - if (!child) { - arg = getpid(); - write(-1, "", 0); - _exit (arg); - } - } -} - -int -main () -{ - pid_t parent = getpid (); - pid_t child; - - sparc_address_test (0); - - child = vfork (); - - if (child == 0) { - /* Here is another test for sparc vfork register problems. This - test uses lots of local variables, at least as many local - variables as main has allocated so far including compiler - temporaries. 4 locals are enough for gcc 1.40.3 on a Solaris - 4.1.3 sparc, but we use 8 to be safe. A buggy compiler should - reuse the register of parent for one of the local variables, - since it will think that parent can't possibly be used any more - in this routine. Assigning to the local variable will thus - munge parent in the parent process. */ - pid_t - p = getpid(), p1 = getpid(), p2 = getpid(), p3 = getpid(), - p4 = getpid(), p5 = getpid(), p6 = getpid(), p7 = getpid(); - /* Convince the compiler that p..p7 are live; otherwise, it might - use the same hardware register for all 8 local variables. */ - if (p != p1 || p != p2 || p != p3 || p != p4 - || p != p5 || p != p6 || p != p7) - _exit(1); - - /* On some systems (e.g. IRIX 3.3), vfork doesn't separate parent - from child file descriptors. If the child closes a descriptor - before it execs or exits, this munges the parent's descriptor - as well. Test for this by closing stdout in the child. */ - _exit(close(fileno(stdout)) != 0); - } else { - int status; - struct stat st; - - while (wait(&status) != child) - ; - exit( - /* Was there some problem with vforking? */ - child < 0 - - /* Did the child fail? (This shouldn't happen.) */ - || status - - /* Did the vfork/compiler bug occur? */ - || parent != getpid() - - /* Did the file descriptor bug occur? */ - || fstat(fileno(stdout), &st) != 0 - ); - } -} -_ACEOF -rm -f conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_vfork_works=yes -else - echo "$as_me: program exited with status $ac_status" >&5 -echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -ac_cv_func_vfork_works=no -fi -rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi -fi -echo "$as_me:$LINENO: result: $ac_cv_func_vfork_works" >&5 -echo "${ECHO_T}$ac_cv_func_vfork_works" >&6 - -fi; -if test "x$ac_cv_func_fork_works" = xcross; then - ac_cv_func_vfork_works=ac_cv_func_vfork - { echo "$as_me:$LINENO: WARNING: result $ac_cv_func_vfork_works guessed because of cross compilation" >&5 -echo "$as_me: WARNING: result $ac_cv_func_vfork_works guessed because of cross compilation" >&2;} -fi - -if test "x$ac_cv_func_vfork_works" = xyes; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_WORKING_VFORK 1 -_ACEOF - -else - -cat >>confdefs.h <<\_ACEOF -#define vfork fork -_ACEOF - -fi -if test "x$ac_cv_func_fork_works" = xyes; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_WORKING_FORK 1 -_ACEOF - -fi - -if test $ac_cv_c_compiler_gnu = yes; then - echo "$as_me:$LINENO: checking whether $CC needs -traditional" >&5 -echo $ECHO_N "checking whether $CC needs -traditional... $ECHO_C" >&6 -if test "${ac_cv_prog_gcc_traditional+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_pattern="Autoconf.*'x'" - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -Autoconf TIOCGETP -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "$ac_pattern" >/dev/null 2>&1; then - ac_cv_prog_gcc_traditional=yes -else - ac_cv_prog_gcc_traditional=no -fi -rm -f conftest* - - - if test $ac_cv_prog_gcc_traditional = no; then - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -Autoconf TCGETA -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "$ac_pattern" >/dev/null 2>&1; then - ac_cv_prog_gcc_traditional=yes -fi -rm -f conftest* - - fi -fi -echo "$as_me:$LINENO: result: $ac_cv_prog_gcc_traditional" >&5 -echo "${ECHO_T}$ac_cv_prog_gcc_traditional" >&6 - if test $ac_cv_prog_gcc_traditional = yes; then - CC="$CC -traditional" - fi -fi - - -for ac_header in stdlib.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -else - # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_header_compiler=no -fi -rm -f conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 - -# Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_cxx_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc in - yes:no ) - { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - ( - cat <<\_ASBOX -## ------------------------------------ ## -## Report this to bug-autoconf@gnu.org. ## -## ------------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; - no:yes ) - { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - ( - cat <<\_ASBOX -## ------------------------------------ ## -## Report this to bug-autoconf@gnu.org. ## -## ------------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - eval "$as_ac_Header=$ac_header_preproc" -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 - -fi -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - -echo "$as_me:$LINENO: checking for GNU libc compatible malloc" >&5 -echo $ECHO_N "checking for GNU libc compatible malloc... $ECHO_C" >&6 -if test "${ac_cv_func_malloc_0_nonnull+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test "$cross_compiling" = yes; then - ac_cv_func_malloc_0_nonnull=no -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#if STDC_HEADERS || HAVE_STDLIB_H -# include -#else -char *malloc (); -#endif - -int -main () -{ -exit (malloc (0) ? 0 : 1); - ; - return 0; -} -_ACEOF -rm -f conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_malloc_0_nonnull=yes -else - echo "$as_me: program exited with status $ac_status" >&5 -echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -ac_cv_func_malloc_0_nonnull=no -fi -rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi -fi -echo "$as_me:$LINENO: result: $ac_cv_func_malloc_0_nonnull" >&5 -echo "${ECHO_T}$ac_cv_func_malloc_0_nonnull" >&6 -if test $ac_cv_func_malloc_0_nonnull = yes; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_MALLOC 1 -_ACEOF - -else - cat >>confdefs.h <<\_ACEOF -#define HAVE_MALLOC 0 -_ACEOF - - LIBOBJS="$LIBOBJS malloc.$ac_objext" - -cat >>confdefs.h <<\_ACEOF -#define malloc rpl_malloc -_ACEOF - -fi - - - - - -for ac_header in sys/select.h sys/socket.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -else - # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_header_compiler=no -fi -rm -f conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 - -# Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_cxx_preproc_warn_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc in - yes:no ) - { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - ( - cat <<\_ASBOX -## ------------------------------------ ## -## Report this to bug-autoconf@gnu.org. ## -## ------------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; - no:yes ) - { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - ( - cat <<\_ASBOX -## ------------------------------------ ## -## Report this to bug-autoconf@gnu.org. ## -## ------------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - eval "$as_ac_Header=$ac_header_preproc" -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 - -fi -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - -echo "$as_me:$LINENO: checking types of arguments for select" >&5 -echo $ECHO_N "checking types of arguments for select... $ECHO_C" >&6 -if test "${ac_cv_func_select_args+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - for ac_arg234 in 'fd_set *' 'int *' 'void *'; do - for ac_arg1 in 'int' 'size_t' 'unsigned long' 'unsigned'; do - for ac_arg5 in 'struct timeval *' 'const struct timeval *'; do - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#if HAVE_SYS_SELECT_H -# include -#endif -#if HAVE_SYS_SOCKET_H -# include -#endif - -int -main () -{ -extern int select ($ac_arg1, - $ac_arg234, $ac_arg234, $ac_arg234, - $ac_arg5); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_select_args="$ac_arg1,$ac_arg234,$ac_arg5"; break 3 -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.$ac_objext conftest.$ac_ext - done - done -done -# Provide a safe default value. -: ${ac_cv_func_select_args='int,int *,struct timeval *'} - -fi -echo "$as_me:$LINENO: result: $ac_cv_func_select_args" >&5 -echo "${ECHO_T}$ac_cv_func_select_args" >&6 -ac_save_IFS=$IFS; IFS=',' -set dummy `echo "$ac_cv_func_select_args" | sed 's/\*/\*/g'` -IFS=$ac_save_IFS -shift - -cat >>confdefs.h <<_ACEOF -#define SELECT_TYPE_ARG1 $1 -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define SELECT_TYPE_ARG234 ($2) -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define SELECT_TYPE_ARG5 ($3) -_ACEOF - -rm -f conftest* - -echo "$as_me:$LINENO: checking return type of signal handlers" >&5 -echo $ECHO_N "checking return type of signal handlers... $ECHO_C" >&6 -if test "${ac_cv_type_signal+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#include -#ifdef signal -# undef signal -#endif -#ifdef __cplusplus -extern "C" void (*signal (int, void (*)(int)))(int); -#else -void (*signal ()) (); -#endif - -int -main () -{ -int i; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_type_signal=void -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_type_signal=int -fi -rm -f conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_type_signal" >&5 -echo "${ECHO_T}$ac_cv_type_signal" >&6 - -cat >>confdefs.h <<_ACEOF -#define RETSIGTYPE $ac_cv_type_signal -_ACEOF - - -echo "$as_me:$LINENO: checking whether lstat dereferences a symlink specified with a trailing slash" >&5 -echo $ECHO_N "checking whether lstat dereferences a symlink specified with a trailing slash... $ECHO_C" >&6 -if test "${ac_cv_func_lstat_dereferences_slashed_symlink+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - rm -f conftest.sym conftest.file -echo >conftest.file -if test "$as_ln_s" = "ln -s" && ln -s conftest.file conftest.sym; then - if test "$cross_compiling" = yes; then - ac_cv_func_lstat_dereferences_slashed_symlink=no -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -struct stat sbuf; - /* Linux will dereference the symlink and fail. - That is better in the sense that it means we will not - have to compile and use the lstat wrapper. */ - exit (lstat ("conftest.sym/", &sbuf) ? 0 : 1); - ; - return 0; -} -_ACEOF -rm -f conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_lstat_dereferences_slashed_symlink=yes -else - echo "$as_me: program exited with status $ac_status" >&5 -echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -ac_cv_func_lstat_dereferences_slashed_symlink=no -fi -rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi -else - # If the `ln -s' command failed, then we probably don't even - # have an lstat function. - ac_cv_func_lstat_dereferences_slashed_symlink=no -fi -rm -f conftest.sym conftest.file - -fi -echo "$as_me:$LINENO: result: $ac_cv_func_lstat_dereferences_slashed_symlink" >&5 -echo "${ECHO_T}$ac_cv_func_lstat_dereferences_slashed_symlink" >&6 - -test $ac_cv_func_lstat_dereferences_slashed_symlink = yes && - -cat >>confdefs.h <<_ACEOF -#define LSTAT_FOLLOWS_SLASHED_SYMLINK 1 -_ACEOF - - -if test $ac_cv_func_lstat_dereferences_slashed_symlink = no; then - LIBOBJS="$LIBOBJS lstat.$ac_objext" -fi - -echo "$as_me:$LINENO: checking whether stat accepts an empty string" >&5 -echo $ECHO_N "checking whether stat accepts an empty string... $ECHO_C" >&6 -if test "${ac_cv_func_stat_empty_string_bug+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test "$cross_compiling" = yes; then - ac_cv_func_stat_empty_string_bug=yes -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -struct stat sbuf; - exit (stat ("", &sbuf) ? 1 : 0); - ; - return 0; -} -_ACEOF -rm -f conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_stat_empty_string_bug=yes -else - echo "$as_me: program exited with status $ac_status" >&5 -echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -ac_cv_func_stat_empty_string_bug=no -fi -rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi -fi -echo "$as_me:$LINENO: result: $ac_cv_func_stat_empty_string_bug" >&5 -echo "${ECHO_T}$ac_cv_func_stat_empty_string_bug" >&6 -if test $ac_cv_func_stat_empty_string_bug = yes; then - LIBOBJS="$LIBOBJS stat.$ac_objext" - -cat >>confdefs.h <<_ACEOF -#define HAVE_STAT_EMPTY_STRING_BUG 1 -_ACEOF - -fi - - - - - - - - -for ac_func in alarm bzero mkdir select sbrk tcgetattr tcsetattr -do -as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` -echo "$as_me:$LINENO: checking for $ac_func" >&5 -echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 -if eval "test \"\${$as_ac_var+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ -#ifdef __STDC__ -# include -#else -# include -#endif -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_$ac_func) || defined (__stub___$ac_func) -choke me -#else -char (*f) () = $ac_func; -#endif -#ifdef __cplusplus -} -#endif - -int -main () -{ -return f != $ac_func; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - eval "$as_ac_var=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -eval "$as_ac_var=no" -fi -rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 -if test `eval echo '${'$as_ac_var'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 -_ACEOF - -fi -done - - -echo "$as_me:$LINENO: checking for long file names" >&5 -echo $ECHO_N "checking for long file names... $ECHO_C" >&6 -if test "${ac_cv_sys_long_file_names+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_cv_sys_long_file_names=yes -# Test for long file names in all the places we know might matter: -# . the current directory, where building will happen -# $prefix/lib where we will be installing things -# $exec_prefix/lib likewise -# eval it to expand exec_prefix. -# $TMPDIR if set, where it might want to write temporary files -# if $TMPDIR is not set: -# /tmp where it might want to write temporary files -# /var/tmp likewise -# /usr/tmp likewise -if test -n "$TMPDIR" && test -d "$TMPDIR" && test -w "$TMPDIR"; then - ac_tmpdirs=$TMPDIR -else - ac_tmpdirs='/tmp /var/tmp /usr/tmp' -fi -for ac_dir in . $ac_tmpdirs `eval echo $prefix/lib $exec_prefix/lib` ; do - test -d $ac_dir || continue - test -w $ac_dir || continue # It is less confusing to not echo anything here. - ac_xdir=$ac_dir/cf$$ - (umask 077 && mkdir $ac_xdir 2>/dev/null) || continue - ac_tf1=$ac_xdir/conftest9012345 - ac_tf2=$ac_xdir/conftest9012346 - (echo 1 >$ac_tf1) 2>/dev/null - (echo 2 >$ac_tf2) 2>/dev/null - ac_val=`cat $ac_tf1 2>/dev/null` - if test ! -f $ac_tf1 || test "$ac_val" != 1; then - ac_cv_sys_long_file_names=no - rm -rf $ac_xdir 2>/dev/null - break - fi - rm -rf $ac_xdir 2>/dev/null -done -fi -echo "$as_me:$LINENO: result: $ac_cv_sys_long_file_names" >&5 -echo "${ECHO_T}$ac_cv_sys_long_file_names" >&6 -if test $ac_cv_sys_long_file_names = yes; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_LONG_FILE_NAMES 1 -_ACEOF - -fi - - -echo "$as_me:$LINENO: checking whether cfgetospeed is declared" >&5 -echo $ECHO_N "checking whether cfgetospeed is declared... $ECHO_C" >&6 -if test "${ac_cv_have_decl_cfgetospeed+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -#line $LINENO "configure" -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include - -int -main () -{ -#ifndef cfgetospeed - char *p = (char *) cfgetospeed; -#endif - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_have_decl_cfgetospeed=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_have_decl_cfgetospeed=no -fi -rm -f conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_have_decl_cfgetospeed" >&5 -echo "${ECHO_T}$ac_cv_have_decl_cfgetospeed" >&6 -if test $ac_cv_have_decl_cfgetospeed = yes; then - -cat >>confdefs.h <<_ACEOF -#define HAVE_DECL_CFGETOSPEED 1 -_ACEOF - - -else - cat >>confdefs.h <<_ACEOF -#define HAVE_DECL_CFGETOSPEED 0 -_ACEOF - - -fi - - - ac_config_files="$ac_config_files makefile" - -cat >confcache <<\_ACEOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs, see configure's option --config-cache. -# It is not useful on other systems. If it contains results you don't -# want to keep, you may remove or edit it. -# -# config.status only pays attention to the cache file if you give it -# the --recheck option to rerun configure. -# -# `ac_cv_env_foo' variables (set or unset) will be overridden when -# loading this file, other *unset* `ac_cv_foo' will be assigned the -# following values. - -_ACEOF - -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, don't put newlines in cache variables' values. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -{ - (set) 2>&1 | - case `(ac_space=' '; set | grep ac_space) 2>&1` in - *ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \). - sed -n \ - "s/'/'\\\\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n \ - "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" - ;; - esac; -} | - sed ' - t clear - : clear - s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ - t end - /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ - : end' >>confcache -if diff $cache_file confcache >/dev/null 2>&1; then :; else - if test -w $cache_file; then - test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" - cat confcache >$cache_file - else - echo "not updating unwritable cache $cache_file" - fi -fi -rm -f confcache - -test "x$prefix" = xNONE && prefix=$ac_default_prefix -# Let make expand exec_prefix. -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - -# VPATH may cause trouble with some makes, so we remove $(srcdir), -# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and -# trailing colons and then remove the whole line if VPATH becomes empty -# (actually we leave an empty line to preserve line numbers). -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=/{ -s/:*\$(srcdir):*/:/; -s/:*\${srcdir}:*/:/; -s/:*@srcdir@:*/:/; -s/^\([^=]*=[ ]*\):*/\1/; -s/:*$//; -s/^[^=]*=[ ]*$//; -}' -fi - -DEFS=-DHAVE_CONFIG_H - -ac_libobjs= -ac_ltlibobjs= -for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue - # 1. Remove the extension, and $U if already installed. - ac_i=`echo "$ac_i" | - sed 's/\$U\././;s/\.o$//;s/\.obj$//'` - # 2. Add them. - ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" - ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' -done -LIBOBJS=$ac_libobjs - -LTLIBOBJS=$ac_ltlibobjs - - - -: ${CONFIG_STATUS=./config.status} -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 -echo "$as_me: creating $CONFIG_STATUS" >&6;} -cat >$CONFIG_STATUS <<_ACEOF -#! $SHELL -# Generated by $as_me. -# Run this file to recreate the current configuration. -# Compiler output produced by configure, useful for debugging -# configure, is in config.log if it exists. - -debug=false -ac_cs_recheck=false -ac_cs_silent=false -SHELL=\${CONFIG_SHELL-$SHELL} -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF -## --------------------- ## -## M4sh Initialization. ## -## --------------------- ## - -# Be Bourne compatible -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' -elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then - set -o posix -fi - -# Support unset when possible. -if (FOO=FOO; unset FOO) >/dev/null 2>&1; then - as_unset=unset -else - as_unset=false -fi - - -# Work around bugs in pre-3.0 UWIN ksh. -$as_unset ENV MAIL MAILPATH -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -for as_var in \ - LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ - LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ - LC_TELEPHONE LC_TIME -do - if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then - eval $as_var=C; export $as_var - else - $as_unset $as_var - fi -done - -# Required to use basename. -if expr a : '\(a\)' >/dev/null 2>&1; then - as_expr=expr -else - as_expr=false -fi - -if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - - -# Name of the executable. -as_me=`$as_basename "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)$' \| \ - . : '\(.\)' 2>/dev/null || -echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } - /^X\/\(\/\/\)$/{ s//\1/; q; } - /^X\/\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - - -# PATH needs CR, and LINENO needs CR and PATH. -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi - - - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" || { - # Find who we are. Look in the path if we contain no path at all - # relative or not. - case $0 in - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done - - ;; - esac - # We did not find ourselves, most probably we were run as `sh COMMAND' - # in which case we are not to be found in the path. - if test "x$as_myself" = x; then - as_myself=$0 - fi - if test ! -f "$as_myself"; then - { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 -echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} - { (exit 1); exit 1; }; } - fi - case $CONFIG_SHELL in - '') - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for as_base in sh bash ksh sh5; do - case $as_dir in - /*) - if ("$as_dir/$as_base" -c ' - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then - $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } - $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } - CONFIG_SHELL=$as_dir/$as_base - export CONFIG_SHELL - exec "$CONFIG_SHELL" "$0" ${1+"$@"} - fi;; - esac - done -done -;; - esac - - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line before each line; the second 'sed' does the real - # work. The second script uses 'N' to pair each line-number line - # with the numbered line, and appends trailing '-' during - # substitution so that $LINENO is not a special case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) - sed '=' <$as_myself | - sed ' - N - s,$,-, - : loop - s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, - t loop - s,-$,, - s,^['$as_cr_digits']*\n,, - ' >$as_me.lineno && - chmod +x $as_me.lineno || - { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 -echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} - { (exit 1); exit 1; }; } - - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensible to this). - . ./$as_me.lineno - # Exit status is that of the last command. - exit -} - - -case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in - *c*,-n*) ECHO_N= ECHO_C=' -' ECHO_T=' ' ;; - *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; - *) ECHO_N= ECHO_C='\c' ECHO_T= ;; -esac - -if expr a : '\(a\)' >/dev/null 2>&1; then - as_expr=expr -else - as_expr=false -fi - -rm -f conf$$ conf$$.exe conf$$.file -echo >conf$$.file -if ln -s conf$$.file conf$$ 2>/dev/null; then - # We could just check for DJGPP; but this test a) works b) is more generic - # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). - if test -f conf$$.exe; then - # Don't use ln at all; we don't have any links - as_ln_s='cp -p' - else - as_ln_s='ln -s' - fi -elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln -else - as_ln_s='cp -p' -fi -rm -f conf$$ conf$$.exe conf$$.file - -if mkdir -p . 2>/dev/null; then - as_mkdir_p=: -else - as_mkdir_p=false -fi - -as_executable_p="test -f" - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g" - - -# IFS -# We need space, tab and new line, in precisely that order. -as_nl=' -' -IFS=" $as_nl" - -# CDPATH. -$as_unset CDPATH - -exec 6>&1 - -# Open the log real soon, to keep \$[0] and so on meaningful, and to -# report actual input values of CONFIG_FILES etc. instead of their -# values after options handling. Logging --version etc. is OK. -exec 5>>config.log -{ - echo - sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -## Running $as_me. ## -_ASBOX -} >&5 -cat >&5 <<_CSEOF - -This file was extended by VTECO $as_me 6.4, which was -generated by GNU Autoconf 2.57. Invocation command line was - - CONFIG_FILES = $CONFIG_FILES - CONFIG_HEADERS = $CONFIG_HEADERS - CONFIG_LINKS = $CONFIG_LINKS - CONFIG_COMMANDS = $CONFIG_COMMANDS - $ $0 $@ - -_CSEOF -echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 -echo >&5 -_ACEOF - -# Files that config.status was made for. -if test -n "$ac_config_files"; then - echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS -fi - -if test -n "$ac_config_headers"; then - echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS -fi - -if test -n "$ac_config_links"; then - echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS -fi - -if test -n "$ac_config_commands"; then - echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS -fi - -cat >>$CONFIG_STATUS <<\_ACEOF - -ac_cs_usage="\ -\`$as_me' instantiates files from templates according to the -current configuration. - -Usage: $0 [OPTIONS] [FILE]... - - -h, --help print this help, then exit - -V, --version print version number, then exit - -q, --quiet do not print progress messages - -d, --debug don't remove temporary files - --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] - instantiate the configuration file FILE - --header=FILE[:TEMPLATE] - instantiate the configuration header FILE - -Configuration files: -$config_files - -Configuration headers: -$config_headers - -Report bugs to ." -_ACEOF - -cat >>$CONFIG_STATUS <<_ACEOF -ac_cs_version="\\ -VTECO config.status 6.4 -configured by $0, generated by GNU Autoconf 2.57, - with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" - -Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001 -Free Software Foundation, Inc. -This config.status script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it." -srcdir=$srcdir -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF -# If no file are specified by the user, then we need to provide default -# value. By we need to know if files were specified by the user. -ac_need_defaults=: -while test $# != 0 -do - case $1 in - --*=*) - ac_option=`expr "x$1" : 'x\([^=]*\)='` - ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` - ac_shift=: - ;; - -*) - ac_option=$1 - ac_optarg=$2 - ac_shift=shift - ;; - *) # This is not an option, so the user has probably given explicit - # arguments. - ac_option=$1 - ac_need_defaults=false;; - esac - - case $ac_option in - # Handling of the options. -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - ac_cs_recheck=: ;; - --version | --vers* | -V ) - echo "$ac_cs_version"; exit 0 ;; - --he | --h) - # Conflict between --help and --header - { { echo "$as_me:$LINENO: error: ambiguous option: $1 -Try \`$0 --help' for more information." >&5 -echo "$as_me: error: ambiguous option: $1 -Try \`$0 --help' for more information." >&2;} - { (exit 1); exit 1; }; };; - --help | --hel | -h ) - echo "$ac_cs_usage"; exit 0 ;; - --debug | --d* | -d ) - debug=: ;; - --file | --fil | --fi | --f ) - $ac_shift - CONFIG_FILES="$CONFIG_FILES $ac_optarg" - ac_need_defaults=false;; - --header | --heade | --head | --hea ) - $ac_shift - CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" - ac_need_defaults=false;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil | --si | --s) - ac_cs_silent=: ;; - - # This is an error. - -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 -Try \`$0 --help' for more information." >&5 -echo "$as_me: error: unrecognized option: $1 -Try \`$0 --help' for more information." >&2;} - { (exit 1); exit 1; }; } ;; - - *) ac_config_targets="$ac_config_targets $1" ;; - - esac - shift -done - -ac_configure_extra_args= - -if $ac_cs_silent; then - exec 6>/dev/null - ac_configure_extra_args="$ac_configure_extra_args --silent" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF -if \$ac_cs_recheck; then - echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 - exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion -fi - -_ACEOF - - - - - -cat >>$CONFIG_STATUS <<\_ACEOF -for ac_config_target in $ac_config_targets -do - case "$ac_config_target" in - # Handling of arguments. - "makefile" ) CONFIG_FILES="$CONFIG_FILES makefile" ;; - "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; - *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 -echo "$as_me: error: invalid argument: $ac_config_target" >&2;} - { (exit 1); exit 1; }; };; - esac -done - -# If the user did not use the arguments to specify the items to instantiate, -# then the envvar interface is used. Set only those that are not. -# We use the long form for the default assignment because of an extremely -# bizarre bug on SunOS 4.1.3. -if $ac_need_defaults; then - test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files - test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers -fi - -# Have a temporary directory for convenience. Make it in the build tree -# simply because there is no reason to put it here, and in addition, -# creating and moving files from /tmp can sometimes cause problems. -# Create a temporary directory, and hook for its removal unless debugging. -$debug || -{ - trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 - trap '{ (exit 1); exit 1; }' 1 2 13 15 -} - -# Create a (secure) tmp directory for tmp files. - -{ - tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && - test -n "$tmp" && test -d "$tmp" -} || -{ - tmp=./confstat$$-$RANDOM - (umask 077 && mkdir $tmp) -} || -{ - echo "$me: cannot create a temporary directory in ." >&2 - { (exit 1); exit 1; } -} - -_ACEOF - -cat >>$CONFIG_STATUS <<_ACEOF - -# -# CONFIG_FILES section. -# - -# No need to generate the scripts if there are no CONFIG_FILES. -# This happens for instance when ./config.status config.h -if test -n "\$CONFIG_FILES"; then - # Protect against being on the right side of a sed subst in config.status. - sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; - s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF -s,@SHELL@,$SHELL,;t t -s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t -s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t -s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t -s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t -s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t -s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t -s,@exec_prefix@,$exec_prefix,;t t -s,@prefix@,$prefix,;t t -s,@program_transform_name@,$program_transform_name,;t t -s,@bindir@,$bindir,;t t -s,@sbindir@,$sbindir,;t t -s,@libexecdir@,$libexecdir,;t t -s,@datadir@,$datadir,;t t -s,@sysconfdir@,$sysconfdir,;t t -s,@sharedstatedir@,$sharedstatedir,;t t -s,@localstatedir@,$localstatedir,;t t -s,@libdir@,$libdir,;t t -s,@includedir@,$includedir,;t t -s,@oldincludedir@,$oldincludedir,;t t -s,@infodir@,$infodir,;t t -s,@mandir@,$mandir,;t t -s,@build_alias@,$build_alias,;t t -s,@host_alias@,$host_alias,;t t -s,@target_alias@,$target_alias,;t t -s,@DEFS@,$DEFS,;t t -s,@ECHO_C@,$ECHO_C,;t t -s,@ECHO_N@,$ECHO_N,;t t -s,@ECHO_T@,$ECHO_T,;t t -s,@LIBS@,$LIBS,;t t -s,@GCC@,$GCC,;t t -s,@CC@,$CC,;t t -s,@CFLAGS@,$CFLAGS,;t t -s,@LDFLAGS@,$LDFLAGS,;t t -s,@CPPFLAGS@,$CPPFLAGS,;t t -s,@ac_ct_CC@,$ac_ct_CC,;t t -s,@EXEEXT@,$EXEEXT,;t t -s,@OBJEXT@,$OBJEXT,;t t -s,@CXX@,$CXX,;t t -s,@CXXFLAGS@,$CXXFLAGS,;t t -s,@ac_ct_CXX@,$ac_ct_CXX,;t t -s,@CXXCPP@,$CXXCPP,;t t -s,@EGREP@,$EGREP,;t t -s,@LIBOBJS@,$LIBOBJS,;t t -s,@LTLIBOBJS@,$LTLIBOBJS,;t t -CEOF - -_ACEOF - - cat >>$CONFIG_STATUS <<\_ACEOF - # Split the substitutions into bite-sized pieces for seds with - # small command number limits, like on Digital OSF/1 and HP-UX. - ac_max_sed_lines=48 - ac_sed_frag=1 # Number of current file. - ac_beg=1 # First line for current file. - ac_end=$ac_max_sed_lines # Line after last line for current file. - ac_more_lines=: - ac_sed_cmds= - while $ac_more_lines; do - if test $ac_beg -gt 1; then - sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag - else - sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag - fi - if test ! -s $tmp/subs.frag; then - ac_more_lines=false - else - # The purpose of the label and of the branching condition is to - # speed up the sed processing (if there are no `@' at all, there - # is no need to browse any of the substitutions). - # These are the two extra sed commands mentioned above. - (echo ':t - /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed - if test -z "$ac_sed_cmds"; then - ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" - else - ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" - fi - ac_sed_frag=`expr $ac_sed_frag + 1` - ac_beg=$ac_end - ac_end=`expr $ac_end + $ac_max_sed_lines` - fi - done - if test -z "$ac_sed_cmds"; then - ac_sed_cmds=cat - fi -fi # test -n "$CONFIG_FILES" - -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF -for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". - case $ac_file in - - | *:- | *:-:* ) # input from stdin - cat >$tmp/stdin - ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; - *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; - * ) ac_file_in=$ac_file.in ;; - esac - - # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. - ac_dir=`(dirname "$ac_file") 2>/dev/null || -$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - { if $as_mkdir_p; then - mkdir -p "$ac_dir" - else - as_dir="$ac_dir" - as_dirs= - while test ! -d "$as_dir"; do - as_dirs="$as_dir $as_dirs" - as_dir=`(dirname "$as_dir") 2>/dev/null || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - done - test ! -n "$as_dirs" || mkdir $as_dirs - fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 -echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} - { (exit 1); exit 1; }; }; } - - ac_builddir=. - -if test "$ac_dir" != .; then - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A "../" for each directory in $ac_dir_suffix. - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` -else - ac_dir_suffix= ac_top_builddir= -fi - -case $srcdir in - .) # No --srcdir option. We are building in place. - ac_srcdir=. - if test -z "$ac_top_builddir"; then - ac_top_srcdir=. - else - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` - fi ;; - [\\/]* | ?:[\\/]* ) # Absolute path. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir ;; - *) # Relative path. - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_builddir$srcdir ;; -esac -# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be -# absolute. -ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` -ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd` -ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` -ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` - - - - if test x"$ac_file" != x-; then - { echo "$as_me:$LINENO: creating $ac_file" >&5 -echo "$as_me: creating $ac_file" >&6;} - rm -f "$ac_file" - fi - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - if test x"$ac_file" = x-; then - configure_input= - else - configure_input="$ac_file. " - fi - configure_input=$configure_input"Generated from `echo $ac_file_in | - sed 's,.*/,,'` by configure." - - # First look for the input files in the build tree, otherwise in the - # src tree. - ac_file_inputs=`IFS=: - for f in $ac_file_in; do - case $f in - -) echo $tmp/stdin ;; - [\\/$]*) - # Absolute (can't be DOS-style, as IFS=:) - test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 -echo "$as_me: error: cannot find input file: $f" >&2;} - { (exit 1); exit 1; }; } - echo $f;; - *) # Relative - if test -f "$f"; then - # Build tree - echo $f - elif test -f "$srcdir/$f"; then - # Source tree - echo $srcdir/$f - else - # /dev/null tree - { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 -echo "$as_me: error: cannot find input file: $f" >&2;} - { (exit 1); exit 1; }; } - fi;; - esac - done` || { (exit 1); exit 1; } -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF - sed "$ac_vpsub -$extrasub -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF -:t -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s,@configure_input@,$configure_input,;t t -s,@srcdir@,$ac_srcdir,;t t -s,@abs_srcdir@,$ac_abs_srcdir,;t t -s,@top_srcdir@,$ac_top_srcdir,;t t -s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t -s,@builddir@,$ac_builddir,;t t -s,@abs_builddir@,$ac_abs_builddir,;t t -s,@top_builddir@,$ac_top_builddir,;t t -s,@abs_top_builddir@,$ac_abs_top_builddir,;t t -" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out - rm -f $tmp/stdin - if test x"$ac_file" != x-; then - mv $tmp/out $ac_file - else - cat $tmp/out - rm -f $tmp/out - fi - -done -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF - -# -# CONFIG_HEADER section. -# - -# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where -# NAME is the cpp macro being defined and VALUE is the value it is being given. -# -# ac_d sets the value in "#define NAME VALUE" lines. -ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)' -ac_dB='[ ].*$,\1#\2' -ac_dC=' ' -ac_dD=',;t' -# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE". -ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' -ac_uB='$,\1#\2define\3' -ac_uC=' ' -ac_uD=',;t' - -for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". - case $ac_file in - - | *:- | *:-:* ) # input from stdin - cat >$tmp/stdin - ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; - *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; - * ) ac_file_in=$ac_file.in ;; - esac - - test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5 -echo "$as_me: creating $ac_file" >&6;} - - # First look for the input files in the build tree, otherwise in the - # src tree. - ac_file_inputs=`IFS=: - for f in $ac_file_in; do - case $f in - -) echo $tmp/stdin ;; - [\\/$]*) - # Absolute (can't be DOS-style, as IFS=:) - test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 -echo "$as_me: error: cannot find input file: $f" >&2;} - { (exit 1); exit 1; }; } - echo $f;; - *) # Relative - if test -f "$f"; then - # Build tree - echo $f - elif test -f "$srcdir/$f"; then - # Source tree - echo $srcdir/$f - else - # /dev/null tree - { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 -echo "$as_me: error: cannot find input file: $f" >&2;} - { (exit 1); exit 1; }; } - fi;; - esac - done` || { (exit 1); exit 1; } - # Remove the trailing spaces. - sed 's/[ ]*$//' $ac_file_inputs >$tmp/in - -_ACEOF - -# Transform confdefs.h into two sed scripts, `conftest.defines' and -# `conftest.undefs', that substitutes the proper values into -# config.h.in to produce config.h. The first handles `#define' -# templates, and the second `#undef' templates. -# And first: Protect against being on the right side of a sed subst in -# config.status. Protect against being in an unquoted here document -# in config.status. -rm -f conftest.defines conftest.undefs -# Using a here document instead of a string reduces the quoting nightmare. -# Putting comments in sed scripts is not portable. -# -# `end' is used to avoid that the second main sed command (meant for -# 0-ary CPP macros) applies to n-ary macro definitions. -# See the Autoconf documentation for `clear'. -cat >confdef2sed.sed <<\_ACEOF -s/[\\&,]/\\&/g -s,[\\$`],\\&,g -t clear -: clear -s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*\)\(([^)]*)\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp -t end -s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp -: end -_ACEOF -# If some macros were called several times there might be several times -# the same #defines, which is useless. Nevertheless, we may not want to -# sort them, since we want the *last* AC-DEFINE to be honored. -uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines -sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs -rm -f confdef2sed.sed - -# This sed command replaces #undef with comments. This is necessary, for -# example, in the case of _POSIX_SOURCE, which is predefined and required -# on some systems where configure will not decide to define it. -cat >>conftest.undefs <<\_ACEOF -s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */, -_ACEOF - -# Break up conftest.defines because some shells have a limit on the size -# of here documents, and old seds have small limits too (100 cmds). -echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS -echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS -echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS -echo ' :' >>$CONFIG_STATUS -rm -f conftest.tail -while grep . conftest.defines >/dev/null -do - # Write a limited-size here document to $tmp/defines.sed. - echo ' cat >$tmp/defines.sed <>$CONFIG_STATUS - # Speed up: don't consider the non `#define' lines. - echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS - # Work around the forget-to-reset-the-flag bug. - echo 't clr' >>$CONFIG_STATUS - echo ': clr' >>$CONFIG_STATUS - sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS - echo 'CEOF - sed -f $tmp/defines.sed $tmp/in >$tmp/out - rm -f $tmp/in - mv $tmp/out $tmp/in -' >>$CONFIG_STATUS - sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail - rm -f conftest.defines - mv conftest.tail conftest.defines -done -rm -f conftest.defines -echo ' fi # grep' >>$CONFIG_STATUS -echo >>$CONFIG_STATUS - -# Break up conftest.undefs because some shells have a limit on the size -# of here documents, and old seds have small limits too (100 cmds). -echo ' # Handle all the #undef templates' >>$CONFIG_STATUS -rm -f conftest.tail -while grep . conftest.undefs >/dev/null -do - # Write a limited-size here document to $tmp/undefs.sed. - echo ' cat >$tmp/undefs.sed <>$CONFIG_STATUS - # Speed up: don't consider the non `#undef' - echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS - # Work around the forget-to-reset-the-flag bug. - echo 't clr' >>$CONFIG_STATUS - echo ': clr' >>$CONFIG_STATUS - sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS - echo 'CEOF - sed -f $tmp/undefs.sed $tmp/in >$tmp/out - rm -f $tmp/in - mv $tmp/out $tmp/in -' >>$CONFIG_STATUS - sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail - rm -f conftest.undefs - mv conftest.tail conftest.undefs -done -rm -f conftest.undefs - -cat >>$CONFIG_STATUS <<\_ACEOF - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - if test x"$ac_file" = x-; then - echo "/* Generated by configure. */" >$tmp/config.h - else - echo "/* $ac_file. Generated by configure. */" >$tmp/config.h - fi - cat $tmp/in >>$tmp/config.h - rm -f $tmp/in - if test x"$ac_file" != x-; then - if diff $ac_file $tmp/config.h >/dev/null 2>&1; then - { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 -echo "$as_me: $ac_file is unchanged" >&6;} - else - ac_dir=`(dirname "$ac_file") 2>/dev/null || -$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - { if $as_mkdir_p; then - mkdir -p "$ac_dir" - else - as_dir="$ac_dir" - as_dirs= - while test ! -d "$as_dir"; do - as_dirs="$as_dir $as_dirs" - as_dir=`(dirname "$as_dir") 2>/dev/null || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - done - test ! -n "$as_dirs" || mkdir $as_dirs - fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 -echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} - { (exit 1); exit 1; }; }; } - - rm -f $ac_file - mv $tmp/config.h $ac_file - fi - else - cat $tmp/config.h - rm -f $tmp/config.h - fi -done -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF - -{ (exit 0); exit 0; } -_ACEOF -chmod +x $CONFIG_STATUS -ac_clean_files=$ac_clean_files_save - - -# configure is writing to config.log, and then calls config.status. -# config.status does its own redirection, appending to config.log. -# Unfortunately, on DOS this fails, as config.log is still kept open -# by configure, so config.status won't be able to write to it; its -# output is simply discarded. So we exec the FD to /dev/null, -# effectively closing config.log, so it can be properly (re)opened and -# appended to by config.status. When coming back to configure, we -# need to make the FD available again. -if test "$no_create" != yes; then - ac_cs_success=: - ac_config_status_args= - test "$silent" = yes && - ac_config_status_args="$ac_config_status_args --quiet" - exec 5>/dev/null - $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false - exec 5>>config.log - # Use ||, not &&, to avoid exiting from the if with $? = 1, which - # would make configure fail if this is the last instruction. - $ac_cs_success || { (exit 1); exit 1; } -fi - diff --git a/configure.ac b/configure.ac new file mode 100644 index 0000000..ff6117e --- /dev/null +++ b/configure.ac @@ -0,0 +1,81 @@ +AC_PREREQ([2.65]) +# Original bug report address: paul@copters.com +AC_INIT([VTECO], [7.0], + [robin.haberkorn@googlemail.com], + [vteco], + [https://github.com/rhaberkorn/videoteco-fork]) +AC_CONFIG_AUX_DIR(config) +AM_INIT_AUTOMAKE + +AC_CONFIG_SRCDIR([teco.c]) +AC_CONFIG_HEADERS([config.h]) + +AC_CANONICAL_BUILD +AC_CANONICAL_HOST + +AC_PROG_CC([cc gcc clang]) +AC_PROG_INSTALL + +# Doxygen is not necessarily required as long as +# you do not run `make devdoc`. +AC_CHECK_PROG(DOXYGEN, doxygen, doxygen) +AC_CHECK_PROG(DOT, dot, dot) +DOXYGEN_HAVE_DOT=YES +if [[ x$DOT = x ]]; then DOXYGEN_HAVE_DOT=NO; fi +AC_SUBST(DOXYGEN_HAVE_DOT) + +AC_SYS_LONG_FILE_NAMES +AC_SYS_POSIX_TERMIOS + +# The original build system also checked for libncurses. +PKG_CHECK_MODULES(LIBTINFO, [tinfo], [ + CFLAGS="$CFLAGS $LIBTINFO_CFLAGS" + LIBS="$LIBS $LIBTINFO_LIBS" + AC_DEFINE([HAVE_LIBTERMINFO], 1, [Define to 1 if you have the `terminfo' library.]) +], [ + AC_SEARCH_LIBS(setupterm, [tinfo terminfo], [ + AC_DEFINE([HAVE_LIBTERMINFO], 1, [Define to 1 if you have the `terminfo' library.]) + ], [ + AC_SEARCH_LIBS(tgetstr, [termcap], [ + AC_DEFINE([HAVE_LIBTERMCAP], 1, [Define to 1 if you have the `termcap' library.]) + ]) + ]) +]) + +AC_HEADER_TIOCGWINSZ +AC_HEADER_DIRENT +AC_HEADER_STAT +#AC_HEADER_STDC +AC_HEADER_SYS_WAIT + +AC_CHECK_HEADERS([ctype.h errno.h fcntl.h memory.h poll.h pwd.h sgtty.h signal.h]) +AC_CHECK_HEADERS([sys/file.h sys/filio.h sys/ioctl.h sys/param.h sys/select.h sys/socket.h]) +AC_CHECK_HEADERS([termcap.h termios.h termio.h]) +AC_TYPE_SIZE_T +AC_TYPE_SSIZE_T + +AC_FUNC_FORK +AC_FUNC_MALLOC + +AC_CHECK_FUNCS([alarm bzero fork mkdir sbrk select poll]) +AC_CHECK_FUNCS([tcgetattr tcsetattr]) + +AC_CHECK_DECLS([cfgetospeed], , , [ + #ifdef HAVE_TERMIOS_H + #include + #endif + #ifdef HAVE_TERMIO_H + #include + #endif +]) +AC_CHECK_MEMBERS([struct termios.c_cflag, struct termios.c_ospeed, struct termios.sg_ospeed], , , [ + #ifdef HAVE_TERMIOS_H + #include + #endif + #ifdef HAVE_TERMIO_H + #include + #endif +]) + +AC_CONFIG_FILES([Makefile doc/Doxyfile]) +AC_OUTPUT diff --git a/doc/Doxyfile.in b/doc/Doxyfile.in new file mode 100644 index 0000000..f4c186d --- /dev/null +++ b/doc/Doxyfile.in @@ -0,0 +1,1551 @@ +# Doxyfile 1.6.3 + +# This file describes the settings to be used by the documentation system +# doxygen (www.doxygen.org) for a project +# +# All text after a hash (#) is considered a comment and will be ignored +# The format is: +# TAG = value [value, ...] +# For lists items can also be appended using: +# TAG += value [value, ...] +# Values that contain spaces should be placed between quotes (" ") + +#--------------------------------------------------------------------------- +# Project related configuration options +#--------------------------------------------------------------------------- + +# This tag specifies the encoding used for all characters in the config file +# that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# http://www.gnu.org/software/libiconv for the list of possible encodings. + +DOXYFILE_ENCODING = UTF-8 + +# The PROJECT_NAME tag is a single word (or a sequence of words surrounded +# by quotes) that should identify the project. + +PROJECT_NAME = "@PACKAGE_NAME@" + +# The PROJECT_NUMBER tag can be used to enter a project or revision number. +# This could be handy for archiving the generated documentation or +# if some version control system is used. + +PROJECT_NUMBER = "@PACKAGE_VERSION@" + +# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) +# base path where the generated documentation will be put. +# If a relative path is entered, it will be relative to the location +# where doxygen was started. If left blank the current directory will be used. + +OUTPUT_DIRECTORY = doc/ + +# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create +# 4096 sub-directories (in 2 levels) under the output directory of each output +# format and will distribute the generated files over these directories. +# Enabling this option can be useful when feeding doxygen a huge amount of +# source files, where putting all generated files in the same directory would +# otherwise cause performance problems for the file system. + +CREATE_SUBDIRS = NO + +# The OUTPUT_LANGUAGE tag is used to specify the language in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all constant output in the proper language. +# The default language is English, other supported languages are: +# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, +# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, +# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English +# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, +# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak, +# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. + +OUTPUT_LANGUAGE = English + +# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will +# include brief member descriptions after the members that are listed in +# the file and class documentation (similar to JavaDoc). +# Set to NO to disable this. + +BRIEF_MEMBER_DESC = YES + +# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend +# the brief description of a member or function before the detailed description. +# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the +# brief descriptions will be completely suppressed. + +REPEAT_BRIEF = YES + +# This tag implements a quasi-intelligent brief description abbreviator +# that is used to form the text in various listings. Each string +# in this list, if found as the leading text of the brief description, will be +# stripped from the text and the result after processing the whole list, is +# used as the annotated text. Otherwise, the brief description is used as-is. +# If left blank, the following values are used ("$name" is automatically +# replaced with the name of the entity): "The $name class" "The $name widget" +# "The $name file" "is" "provides" "specifies" "contains" +# "represents" "a" "an" "the" + +ABBREVIATE_BRIEF = + +# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then +# Doxygen will generate a detailed section even if there is only a brief +# description. + +ALWAYS_DETAILED_SEC = NO + +# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all +# inherited members of a class in the documentation of that class as if those +# members were ordinary class members. Constructors, destructors and assignment +# operators of the base classes will not be shown. + +INLINE_INHERITED_MEMB = NO + +# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full +# path before files name in the file list and in the header files. If set +# to NO the shortest path that makes the file name unique will be used. + +FULL_PATH_NAMES = YES + +# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag +# can be used to strip a user-defined part of the path. Stripping is +# only done if one of the specified strings matches the left-hand part of +# the path. The tag can be used to show relative paths in the file list. +# If left blank the directory from which doxygen is run is used as the +# path to strip. + +STRIP_FROM_PATH = "@abs_top_srcdir@" + +# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of +# the path mentioned in the documentation of a class, which tells +# the reader which header file to include in order to use a class. +# If left blank only the name of the header file containing the class +# definition is used. Otherwise one should specify the include paths that +# are normally passed to the compiler using the -I flag. + +STRIP_FROM_INC_PATH = + +# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter +# (but less readable) file names. This can be useful is your file systems +# doesn't support long names like on DOS, Mac, or CD-ROM. + +SHORT_NAMES = NO + +# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen +# will interpret the first line (until the first dot) of a JavaDoc-style +# comment as the brief description. If set to NO, the JavaDoc +# comments will behave just like regular Qt-style comments +# (thus requiring an explicit @brief command for a brief description.) + +JAVADOC_AUTOBRIEF = NO + +# If the QT_AUTOBRIEF tag is set to YES then Doxygen will +# interpret the first line (until the first dot) of a Qt-style +# comment as the brief description. If set to NO, the comments +# will behave just like regular Qt-style comments (thus requiring +# an explicit \brief command for a brief description.) + +QT_AUTOBRIEF = NO + +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen +# treat a multi-line C++ special comment block (i.e. a block of //! or /// +# comments) as a brief description. This used to be the default behaviour. +# The new default is to treat a multi-line C++ comment block as a detailed +# description. Set this tag to YES if you prefer the old behaviour instead. + +MULTILINE_CPP_IS_BRIEF = NO + +# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented +# member inherits the documentation from any documented member that it +# re-implements. + +INHERIT_DOCS = YES + +# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce +# a new page for each member. If set to NO, the documentation of a member will +# be part of the file/class/namespace that contains it. + +SEPARATE_MEMBER_PAGES = NO + +# The TAB_SIZE tag can be used to set the number of spaces in a tab. +# Doxygen uses this value to replace tabs by spaces in code fragments. + +TAB_SIZE = 8 + +# This tag can be used to specify a number of aliases that acts +# as commands in the documentation. An alias has the form "name=value". +# For example adding "sideeffect=\par Side Effects:\n" will allow you to +# put the command \sideeffect (or @sideeffect) in the documentation, which +# will result in a user-defined paragraph with heading "Side Effects:". +# You can put \n's in the value part of an alias to insert newlines. + +ALIASES = + +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C +# sources only. Doxygen will then generate output that is more tailored for C. +# For instance, some of the names that are used will be different. The list +# of all members will be omitted, etc. + +OPTIMIZE_OUTPUT_FOR_C = YES + +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java +# sources only. Doxygen will then generate output that is more tailored for +# Java. For instance, namespaces will be presented as packages, qualified +# scopes will look different, etc. + +OPTIMIZE_OUTPUT_JAVA = NO + +# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran +# sources only. Doxygen will then generate output that is more tailored for +# Fortran. + +OPTIMIZE_FOR_FORTRAN = NO + +# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL +# sources. Doxygen will then generate output that is tailored for +# VHDL. + +OPTIMIZE_OUTPUT_VHDL = NO + +# Doxygen selects the parser to use depending on the extension of the files it parses. +# With this tag you can assign which parser to use for a given extension. +# Doxygen has a built-in mapping, but you can override or extend it using this tag. +# The format is ext=language, where ext is a file extension, and language is one of +# the parsers supported by doxygen: IDL, Java, Javascript, C#, C, C++, D, PHP, +# Objective-C, Python, Fortran, VHDL, C, C++. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is Fortran), +# use: inc=Fortran f=C. Note that for custom extensions you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. + +EXTENSION_MAPPING = + +# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want +# to include (a tag file for) the STL sources as input, then you should +# set this tag to YES in order to let doxygen match functions declarations and +# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. +# func(std::string) {}). This also make the inheritance and collaboration +# diagrams that involve STL classes more complete and accurate. + +BUILTIN_STL_SUPPORT = NO + +# If you use Microsoft's C++/CLI language, you should set this option to YES to +# enable parsing support. + +CPP_CLI_SUPPORT = NO + +# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. +# Doxygen will parse them like normal C++ but will assume all classes use public +# instead of private inheritance when no explicit protection keyword is present. + +SIP_SUPPORT = NO + +# For Microsoft's IDL there are propget and propput attributes to indicate getter +# and setter methods for a property. Setting this option to YES (the default) +# will make doxygen to replace the get and set methods by a property in the +# documentation. This will only work if the methods are indeed getting or +# setting a simple type. If this is not the case, or you want to show the +# methods anyway, you should set this option to NO. + +IDL_PROPERTY_SUPPORT = YES + +# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC +# tag is set to YES, then doxygen will reuse the documentation of the first +# member in the group (if any) for the other members of the group. By default +# all members of a group must be documented explicitly. + +DISTRIBUTE_GROUP_DOC = NO + +# Set the SUBGROUPING tag to YES (the default) to allow class member groups of +# the same type (for instance a group of public functions) to be put as a +# subgroup of that type (e.g. under the Public Functions section). Set it to +# NO to prevent subgrouping. Alternatively, this can be done per class using +# the \nosubgrouping command. + +SUBGROUPING = YES + +# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum +# is documented as struct, union, or enum with the name of the typedef. So +# typedef struct TypeS {} TypeT, will appear in the documentation as a struct +# with name TypeT. When disabled the typedef will appear as a member of a file, +# namespace, or class. And the struct will be named TypeS. This can typically +# be useful for C code in case the coding convention dictates that all compound +# types are typedef'ed and only the typedef is referenced, never the tag name. + +TYPEDEF_HIDES_STRUCT = NO + +# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to +# determine which symbols to keep in memory and which to flush to disk. +# When the cache is full, less often used symbols will be written to disk. +# For small to medium size projects (<1000 input files) the default value is +# probably good enough. For larger projects a too small cache size can cause +# doxygen to be busy swapping symbols to and from disk most of the time +# causing a significant performance penality. +# If the system has enough physical memory increasing the cache will improve the +# performance by keeping more symbols in memory. Note that the value works on +# a logarithmic scale so increasing the size by one will rougly double the +# memory usage. The cache size is given by this formula: +# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, +# corresponding to a cache size of 2^16 = 65536 symbols + +SYMBOL_CACHE_SIZE = 0 + +#--------------------------------------------------------------------------- +# Build related configuration options +#--------------------------------------------------------------------------- + +# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in +# documentation are documented, even if no documentation was available. +# Private class members and static file members will be hidden unless +# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES + +EXTRACT_ALL = NO + +# If the EXTRACT_PRIVATE tag is set to YES all private members of a class +# will be included in the documentation. + +EXTRACT_PRIVATE = YES + +# If the EXTRACT_STATIC tag is set to YES all static members of a file +# will be included in the documentation. + +EXTRACT_STATIC = YES + +# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) +# defined locally in source files will be included in the documentation. +# If set to NO only classes defined in header files are included. + +EXTRACT_LOCAL_CLASSES = YES + +# This flag is only useful for Objective-C code. When set to YES local +# methods, which are defined in the implementation section but not in +# the interface are included in the documentation. +# If set to NO (the default) only methods in the interface are included. + +EXTRACT_LOCAL_METHODS = NO + +# If this flag is set to YES, the members of anonymous namespaces will be +# extracted and appear in the documentation as a namespace called +# 'anonymous_namespace{file}', where file will be replaced with the base +# name of the file that contains the anonymous namespace. By default +# anonymous namespace are hidden. + +EXTRACT_ANON_NSPACES = NO + +# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all +# undocumented members of documented classes, files or namespaces. +# If set to NO (the default) these members will be included in the +# various overviews, but no documentation section is generated. +# This option has no effect if EXTRACT_ALL is enabled. + +HIDE_UNDOC_MEMBERS = NO + +# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all +# undocumented classes that are normally visible in the class hierarchy. +# If set to NO (the default) these classes will be included in the various +# overviews. This option has no effect if EXTRACT_ALL is enabled. + +HIDE_UNDOC_CLASSES = NO + +# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all +# friend (class|struct|union) declarations. +# If set to NO (the default) these declarations will be included in the +# documentation. + +HIDE_FRIEND_COMPOUNDS = NO + +# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any +# documentation blocks found inside the body of a function. +# If set to NO (the default) these blocks will be appended to the +# function's detailed documentation block. + +HIDE_IN_BODY_DOCS = NO + +# The INTERNAL_DOCS tag determines if documentation +# that is typed after a \internal command is included. If the tag is set +# to NO (the default) then the documentation will be excluded. +# Set it to YES to include the internal documentation. + +INTERNAL_DOCS = YES + +# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate +# file names in lower-case letters. If set to YES upper-case letters are also +# allowed. This is useful if you have classes or files whose names only differ +# in case and if your file system supports case sensitive file names. Windows +# and Mac users are advised to set this option to NO. + +CASE_SENSE_NAMES = YES + +# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen +# will show members with their full class and namespace scopes in the +# documentation. If set to YES the scope will be hidden. + +HIDE_SCOPE_NAMES = NO + +# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen +# will put a list of the files that are included by a file in the documentation +# of that file. + +SHOW_INCLUDE_FILES = YES + +# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen +# will list include files with double quotes in the documentation +# rather than with sharp brackets. + +FORCE_LOCAL_INCLUDES = NO + +# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] +# is inserted in the documentation for inline members. + +INLINE_INFO = YES + +# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen +# will sort the (detailed) documentation of file and class members +# alphabetically by member name. If set to NO the members will appear in +# declaration order. + +SORT_MEMBER_DOCS = YES + +# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the +# brief documentation of file, namespace and class members alphabetically +# by member name. If set to NO (the default) the members will appear in +# declaration order. + +SORT_BRIEF_DOCS = NO + +# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the (brief and detailed) documentation of class members so that constructors and destructors are listed first. If set to NO (the default) the constructors will appear in the respective orders defined by SORT_MEMBER_DOCS and SORT_BRIEF_DOCS. This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO. + +SORT_MEMBERS_CTORS_1ST = NO + +# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the +# hierarchy of group names into alphabetical order. If set to NO (the default) +# the group names will appear in their defined order. + +SORT_GROUP_NAMES = NO + +# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be +# sorted by fully-qualified names, including namespaces. If set to +# NO (the default), the class list will be sorted only by class name, +# not including the namespace part. +# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. +# Note: This option applies only to the class list, not to the +# alphabetical list. + +SORT_BY_SCOPE_NAME = NO + +# The GENERATE_TODOLIST tag can be used to enable (YES) or +# disable (NO) the todo list. This list is created by putting \todo +# commands in the documentation. + +GENERATE_TODOLIST = YES + +# The GENERATE_TESTLIST tag can be used to enable (YES) or +# disable (NO) the test list. This list is created by putting \test +# commands in the documentation. + +GENERATE_TESTLIST = YES + +# The GENERATE_BUGLIST tag can be used to enable (YES) or +# disable (NO) the bug list. This list is created by putting \bug +# commands in the documentation. + +GENERATE_BUGLIST = YES + +# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or +# disable (NO) the deprecated list. This list is created by putting +# \deprecated commands in the documentation. + +GENERATE_DEPRECATEDLIST= YES + +# The ENABLED_SECTIONS tag can be used to enable conditional +# documentation sections, marked by \if sectionname ... \endif. + +ENABLED_SECTIONS = + +# The MAX_INITIALIZER_LINES tag determines the maximum number of lines +# the initial value of a variable or define consists of for it to appear in +# the documentation. If the initializer consists of more lines than specified +# here it will be hidden. Use a value of 0 to hide initializers completely. +# The appearance of the initializer of individual variables and defines in the +# documentation can be controlled using \showinitializer or \hideinitializer +# command in the documentation regardless of this setting. + +MAX_INITIALIZER_LINES = 30 + +# Set the SHOW_USED_FILES tag to NO to disable the list of files generated +# at the bottom of the documentation of classes and structs. If set to YES the +# list will mention the files that were used to generate the documentation. + +SHOW_USED_FILES = YES + +# If the sources in your project are distributed over multiple directories +# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy +# in the documentation. The default is NO. + +SHOW_DIRECTORIES = NO + +# Set the SHOW_FILES tag to NO to disable the generation of the Files page. +# This will remove the Files entry from the Quick Index and from the +# Folder Tree View (if specified). The default is YES. + +SHOW_FILES = YES + +# Set the SHOW_NAMESPACES tag to NO to disable the generation of the +# Namespaces page. +# This will remove the Namespaces entry from the Quick Index +# and from the Folder Tree View (if specified). The default is YES. + +SHOW_NAMESPACES = YES + +# The FILE_VERSION_FILTER tag can be used to specify a program or script that +# doxygen should invoke to get the current version for each file (typically from +# the version control system). Doxygen will invoke the program by executing (via +# popen()) the command , where is the value of +# the FILE_VERSION_FILTER tag, and is the name of an input file +# provided by doxygen. Whatever the program writes to standard output +# is used as the file version. See the manual for examples. + +FILE_VERSION_FILTER = + +# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by +# doxygen. The layout file controls the global structure of the generated output files +# in an output format independent way. The create the layout file that represents +# doxygen's defaults, run doxygen with the -l option. You can optionally specify a +# file name after the option, if omitted DoxygenLayout.xml will be used as the name +# of the layout file. + +LAYOUT_FILE = + +#--------------------------------------------------------------------------- +# configuration options related to warning and progress messages +#--------------------------------------------------------------------------- + +# The QUIET tag can be used to turn on/off the messages that are generated +# by doxygen. Possible values are YES and NO. If left blank NO is used. + +QUIET = NO + +# The WARNINGS tag can be used to turn on/off the warning messages that are +# generated by doxygen. Possible values are YES and NO. If left blank +# NO is used. + +WARNINGS = YES + +# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings +# for undocumented members. If EXTRACT_ALL is set to YES then this flag will +# automatically be disabled. + +WARN_IF_UNDOCUMENTED = YES + +# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for +# potential errors in the documentation, such as not documenting some +# parameters in a documented function, or documenting parameters that +# don't exist or using markup commands wrongly. + +WARN_IF_DOC_ERROR = YES + +# This WARN_NO_PARAMDOC option can be abled to get warnings for +# functions that are documented, but have no documentation for their parameters +# or return value. If set to NO (the default) doxygen will only warn about +# wrong or incomplete parameter documentation, but not about the absence of +# documentation. + +WARN_NO_PARAMDOC = NO + +# The WARN_FORMAT tag determines the format of the warning messages that +# doxygen can produce. The string should contain the $file, $line, and $text +# tags, which will be replaced by the file and line number from which the +# warning originated and the warning text. Optionally the format may contain +# $version, which will be replaced by the version of the file (if it could +# be obtained via FILE_VERSION_FILTER) + +WARN_FORMAT = "$file:$line: $text" + +# The WARN_LOGFILE tag can be used to specify a file to which warning +# and error messages should be written. If left blank the output is written +# to stderr. + +WARN_LOGFILE = + +#--------------------------------------------------------------------------- +# configuration options related to the input files +#--------------------------------------------------------------------------- + +# The INPUT tag can be used to specify the files and/or directories that contain +# documented source files. You may enter file names like "myfile.cpp" or +# directories like "/usr/src/myproject". Separate the files or directories +# with spaces. + +INPUT = "@top_srcdir@" + +# This tag can be used to specify the character encoding of the source files +# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is +# also the default input encoding. Doxygen uses libiconv (or the iconv built +# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for +# the list of possible encodings. + +INPUT_ENCODING = UTF-8 + +# If the value of the INPUT tag contains directories, you can use the +# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank the following patterns are tested: +# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx +# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90 + +FILE_PATTERNS = + +# The RECURSIVE tag can be used to turn specify whether or not subdirectories +# should be searched for input files as well. Possible values are YES and NO. +# If left blank NO is used. + +RECURSIVE = NO + +# The EXCLUDE tag can be used to specify files and/or directories that should +# excluded from the INPUT source files. This way you can easily exclude a +# subdirectory from a directory tree whose root is specified with the INPUT tag. + +EXCLUDE = + +# The EXCLUDE_SYMLINKS tag can be used select whether or not files or +# directories that are symbolic links (a Unix filesystem feature) are excluded +# from the input. + +EXCLUDE_SYMLINKS = NO + +# If the value of the INPUT tag contains directories, you can use the +# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude +# certain files from those directories. Note that the wildcards are matched +# against the file with absolute path, so to exclude all test directories +# for example use the pattern */test/* + +EXCLUDE_PATTERNS = + +# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names +# (namespaces, classes, functions, etc.) that should be excluded from the +# output. The symbol name can be a fully qualified name, a word, or if the +# wildcard * is used, a substring. Examples: ANamespace, AClass, +# AClass::ANamespace, ANamespace::*Test + +EXCLUDE_SYMBOLS = + +# The EXAMPLE_PATH tag can be used to specify one or more files or +# directories that contain example code fragments that are included (see +# the \include command). + +EXAMPLE_PATH = + +# If the value of the EXAMPLE_PATH tag contains directories, you can use the +# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank all files are included. + +EXAMPLE_PATTERNS = + +# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be +# searched for input files to be used with the \include or \dontinclude +# commands irrespective of the value of the RECURSIVE tag. +# Possible values are YES and NO. If left blank NO is used. + +EXAMPLE_RECURSIVE = NO + +# The IMAGE_PATH tag can be used to specify one or more files or +# directories that contain image that are included in the documentation (see +# the \image command). + +IMAGE_PATH = + +# The INPUT_FILTER tag can be used to specify a program that doxygen should +# invoke to filter for each input file. Doxygen will invoke the filter program +# by executing (via popen()) the command , where +# is the value of the INPUT_FILTER tag, and is the name of an +# input file. Doxygen will then use the output that the filter program writes +# to standard output. +# If FILTER_PATTERNS is specified, this tag will be +# ignored. + +INPUT_FILTER = + +# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern +# basis. +# Doxygen will compare the file name with each pattern and apply the +# filter if there is a match. +# The filters are a list of the form: +# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further +# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER +# is applied to all files. + +FILTER_PATTERNS = + +# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using +# INPUT_FILTER) will be used to filter the input files when producing source +# files to browse (i.e. when SOURCE_BROWSER is set to YES). + +FILTER_SOURCE_FILES = NO + +#--------------------------------------------------------------------------- +# configuration options related to source browsing +#--------------------------------------------------------------------------- + +# If the SOURCE_BROWSER tag is set to YES then a list of source files will +# be generated. Documented entities will be cross-referenced with these sources. +# Note: To get rid of all source code in the generated output, make sure also +# VERBATIM_HEADERS is set to NO. + +SOURCE_BROWSER = YES + +# Setting the INLINE_SOURCES tag to YES will include the body +# of functions and classes directly in the documentation. + +INLINE_SOURCES = NO + +# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct +# doxygen to hide any special comment blocks from generated source code +# fragments. Normal C and C++ comments will always remain visible. + +STRIP_CODE_COMMENTS = YES + +# If the REFERENCED_BY_RELATION tag is set to YES +# then for each documented function all documented +# functions referencing it will be listed. + +REFERENCED_BY_RELATION = YES + +# If the REFERENCES_RELATION tag is set to YES +# then for each documented function all documented entities +# called/used by that function will be listed. + +REFERENCES_RELATION = NO + +# If the REFERENCES_LINK_SOURCE tag is set to YES (the default) +# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from +# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will +# link to the source code. +# Otherwise they will link to the documentation. + +REFERENCES_LINK_SOURCE = NO + +# If the USE_HTAGS tag is set to YES then the references to source code +# will point to the HTML generated by the htags(1) tool instead of doxygen +# built-in source browser. The htags tool is part of GNU's global source +# tagging system (see http://www.gnu.org/software/global/global.html). You +# will need version 4.8.6 or higher. + +USE_HTAGS = NO + +# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen +# will generate a verbatim copy of the header file for each class for +# which an include is specified. Set to NO to disable this. + +VERBATIM_HEADERS = YES + +#--------------------------------------------------------------------------- +# configuration options related to the alphabetical class index +#--------------------------------------------------------------------------- + +# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index +# of all compounds will be generated. Enable this if the project +# contains a lot of classes, structs, unions or interfaces. + +ALPHABETICAL_INDEX = NO + +# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then +# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns +# in which this list will be split (can be a number in the range [1..20]) + +COLS_IN_ALPHA_INDEX = 5 + +# In case all classes in a project start with a common prefix, all +# classes will be put under the same header in the alphabetical index. +# The IGNORE_PREFIX tag can be used to specify one or more prefixes that +# should be ignored while generating the index headers. + +IGNORE_PREFIX = + +#--------------------------------------------------------------------------- +# configuration options related to the HTML output +#--------------------------------------------------------------------------- + +# If the GENERATE_HTML tag is set to YES (the default) Doxygen will +# generate HTML output. + +GENERATE_HTML = YES + +# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `html' will be used as the default path. + +HTML_OUTPUT = html + +# The HTML_FILE_EXTENSION tag can be used to specify the file extension for +# each generated HTML page (for example: .htm,.php,.asp). If it is left blank +# doxygen will generate files with .html extension. + +HTML_FILE_EXTENSION = .html + +# The HTML_HEADER tag can be used to specify a personal HTML header for +# each generated HTML page. If it is left blank doxygen will generate a +# standard header. + +HTML_HEADER = + +# The HTML_FOOTER tag can be used to specify a personal HTML footer for +# each generated HTML page. If it is left blank doxygen will generate a +# standard footer. + +HTML_FOOTER = + +# The HTML_STYLESHEET tag can be used to specify a user-defined cascading +# style sheet that is used by each HTML page. It can be used to +# fine-tune the look of the HTML output. If the tag is left blank doxygen +# will generate a default style sheet. Note that doxygen will try to copy +# the style sheet file to the HTML output directory, so don't put your own +# stylesheet in the HTML output directory as well, or it will be erased! + +HTML_STYLESHEET = + +# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML +# page will contain the date and time when the page was generated. Setting +# this to NO can help when comparing the output of multiple runs. + +HTML_TIMESTAMP = YES + +# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, +# files or namespaces will be aligned in HTML using tables. If set to +# NO a bullet list will be used. + +HTML_ALIGN_MEMBERS = YES + +# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML +# documentation will contain sections that can be hidden and shown after the +# page has loaded. For this to work a browser that supports +# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox +# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). + +HTML_DYNAMIC_SECTIONS = YES + +# If the GENERATE_DOCSET tag is set to YES, additional index files +# will be generated that can be used as input for Apple's Xcode 3 +# integrated development environment, introduced with OSX 10.5 (Leopard). +# To create a documentation set, doxygen will generate a Makefile in the +# HTML output directory. Running make will produce the docset in that +# directory and running "make install" will install the docset in +# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find +# it at startup. +# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for more information. + +GENERATE_DOCSET = NO + +# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the +# feed. A documentation feed provides an umbrella under which multiple +# documentation sets from a single provider (such as a company or product suite) +# can be grouped. + +DOCSET_FEEDNAME = "Doxygen generated docs" + +# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that +# should uniquely identify the documentation set bundle. This should be a +# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen +# will append .docset to the name. + +DOCSET_BUNDLE_ID = org.doxygen.Project + +# If the GENERATE_HTMLHELP tag is set to YES, additional index files +# will be generated that can be used as input for tools like the +# Microsoft HTML help workshop to generate a compiled HTML help file (.chm) +# of the generated HTML documentation. + +GENERATE_HTMLHELP = NO + +# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can +# be used to specify the file name of the resulting .chm file. You +# can add a path in front of the file if the result should not be +# written to the html output directory. + +CHM_FILE = + +# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can +# be used to specify the location (absolute path including file name) of +# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run +# the HTML help compiler on the generated index.hhp. + +HHC_LOCATION = + +# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag +# controls if a separate .chi index file is generated (YES) or that +# it should be included in the master .chm file (NO). + +GENERATE_CHI = NO + +# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING +# is used to encode HtmlHelp index (hhk), content (hhc) and project file +# content. + +CHM_INDEX_ENCODING = + +# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag +# controls whether a binary table of contents is generated (YES) or a +# normal table of contents (NO) in the .chm file. + +BINARY_TOC = NO + +# The TOC_EXPAND flag can be set to YES to add extra items for group members +# to the contents of the HTML help documentation and to the tree view. + +TOC_EXPAND = NO + +# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER +# are set, an additional index file will be generated that can be used as input for +# Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated +# HTML documentation. + +GENERATE_QHP = NO + +# If the QHG_LOCATION tag is specified, the QCH_FILE tag can +# be used to specify the file name of the resulting .qch file. +# The path specified is relative to the HTML output folder. + +QCH_FILE = + +# The QHP_NAMESPACE tag specifies the namespace to use when generating +# Qt Help Project output. For more information please see +# http://doc.trolltech.com/qthelpproject.html#namespace + +QHP_NAMESPACE = org.doxygen.Project + +# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating +# Qt Help Project output. For more information please see +# http://doc.trolltech.com/qthelpproject.html#virtual-folders + +QHP_VIRTUAL_FOLDER = doc + +# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to add. +# For more information please see +# http://doc.trolltech.com/qthelpproject.html#custom-filters + +QHP_CUST_FILTER_NAME = + +# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the custom filter to add.For more information please see +# Qt Help Project / Custom Filters. + +QHP_CUST_FILTER_ATTRS = + +# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this project's +# filter section matches. +# Qt Help Project / Filter Attributes. + +QHP_SECT_FILTER_ATTRS = + +# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can +# be used to specify the location of Qt's qhelpgenerator. +# If non-empty doxygen will try to run qhelpgenerator on the generated +# .qhp file. + +QHG_LOCATION = + +# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files +# will be generated, which together with the HTML files, form an Eclipse help +# plugin. To install this plugin and make it available under the help contents +# menu in Eclipse, the contents of the directory containing the HTML and XML +# files needs to be copied into the plugins directory of eclipse. The name of +# the directory within the plugins directory should be the same as +# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before the help appears. + +GENERATE_ECLIPSEHELP = NO + +# A unique identifier for the eclipse help plugin. When installing the plugin +# the directory name containing the HTML and XML files should also have +# this name. + +ECLIPSE_DOC_ID = org.doxygen.Project + +# The DISABLE_INDEX tag can be used to turn on/off the condensed index at +# top of each HTML page. The value NO (the default) enables the index and +# the value YES disables it. + +DISABLE_INDEX = NO + +# This tag can be used to set the number of enum values (range [1..20]) +# that doxygen will group on one line in the generated HTML documentation. + +ENUM_VALUES_PER_LINE = 4 + +# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index +# structure should be generated to display hierarchical information. +# If the tag value is set to YES, a side panel will be generated +# containing a tree-like index structure (just like the one that +# is generated for HTML Help). For this to work a browser that supports +# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser). +# Windows users are probably better off using the HTML help feature. + +GENERATE_TREEVIEW = NO + +# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, +# and Class Hierarchy pages using a tree view instead of an ordered list. + +USE_INLINE_TREES = NO + +# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be +# used to set the initial width (in pixels) of the frame in which the tree +# is shown. + +TREEVIEW_WIDTH = 250 + +# Use this tag to change the font size of Latex formulas included +# as images in the HTML documentation. The default is 10. Note that +# when you change the font size after a successful doxygen run you need +# to manually remove any form_*.png images from the HTML output directory +# to force them to be regenerated. + +FORMULA_FONTSIZE = 10 + +# When the SEARCHENGINE tag is enabled doxygen will generate a search box for the HTML output. The underlying search engine uses javascript +# and DHTML and should work on any modern browser. Note that when using HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET) there is already a search function so this one should +# typically be disabled. For large projects the javascript based search engine +# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution. + +SEARCHENGINE = YES + +# When the SERVER_BASED_SEARCH tag is enabled the search engine will be implemented using a PHP enabled web server instead of at the web client using Javascript. Doxygen will generate the search PHP script and index +# file to put on the web server. The advantage of the server based approach is that it scales better to large projects and allows full text search. The disadvances is that it is more difficult to setup +# and does not have live searching capabilities. + +SERVER_BASED_SEARCH = NO + +#--------------------------------------------------------------------------- +# configuration options related to the LaTeX output +#--------------------------------------------------------------------------- + +# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will +# generate Latex output. + +GENERATE_LATEX = NO + +# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `latex' will be used as the default path. + +LATEX_OUTPUT = latex + +# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be +# invoked. If left blank `latex' will be used as the default command name. +# Note that when enabling USE_PDFLATEX this option is only used for +# generating bitmaps for formulas in the HTML output, but not in the +# Makefile that is written to the output directory. + +LATEX_CMD_NAME = latex + +# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to +# generate index for LaTeX. If left blank `makeindex' will be used as the +# default command name. + +MAKEINDEX_CMD_NAME = makeindex + +# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact +# LaTeX documents. This may be useful for small projects and may help to +# save some trees in general. + +COMPACT_LATEX = NO + +# The PAPER_TYPE tag can be used to set the paper type that is used +# by the printer. Possible values are: a4, a4wide, letter, legal and +# executive. If left blank a4wide will be used. + +PAPER_TYPE = a4wide + +# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX +# packages that should be included in the LaTeX output. + +EXTRA_PACKAGES = + +# The LATEX_HEADER tag can be used to specify a personal LaTeX header for +# the generated latex document. The header should contain everything until +# the first chapter. If it is left blank doxygen will generate a +# standard header. Notice: only use this tag if you know what you are doing! + +LATEX_HEADER = + +# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated +# is prepared for conversion to pdf (using ps2pdf). The pdf file will +# contain links (just like the HTML output) instead of page references +# This makes the output suitable for online browsing using a pdf viewer. + +PDF_HYPERLINKS = YES + +# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of +# plain latex in the generated Makefile. Set this option to YES to get a +# higher quality PDF documentation. + +USE_PDFLATEX = YES + +# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. +# command to the generated LaTeX files. This will instruct LaTeX to keep +# running if errors occur, instead of asking the user for help. +# This option is also used when generating formulas in HTML. + +LATEX_BATCHMODE = NO + +# If LATEX_HIDE_INDICES is set to YES then doxygen will not +# include the index chapters (such as File Index, Compound Index, etc.) +# in the output. + +LATEX_HIDE_INDICES = NO + +# If LATEX_SOURCE_CODE is set to YES then doxygen will include source code with syntax highlighting in the LaTeX output. Note that which sources are shown also depends on other settings such as SOURCE_BROWSER. + +LATEX_SOURCE_CODE = NO + +#--------------------------------------------------------------------------- +# configuration options related to the RTF output +#--------------------------------------------------------------------------- + +# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output +# The RTF output is optimized for Word 97 and may not look very pretty with +# other RTF readers or editors. + +GENERATE_RTF = NO + +# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `rtf' will be used as the default path. + +RTF_OUTPUT = rtf + +# If the COMPACT_RTF tag is set to YES Doxygen generates more compact +# RTF documents. This may be useful for small projects and may help to +# save some trees in general. + +COMPACT_RTF = NO + +# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated +# will contain hyperlink fields. The RTF file will +# contain links (just like the HTML output) instead of page references. +# This makes the output suitable for online browsing using WORD or other +# programs which support those fields. +# Note: wordpad (write) and others do not support links. + +RTF_HYPERLINKS = NO + +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# config file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. + +RTF_STYLESHEET_FILE = + +# Set optional variables used in the generation of an rtf document. +# Syntax is similar to doxygen's config file. + +RTF_EXTENSIONS_FILE = + +#--------------------------------------------------------------------------- +# configuration options related to the man page output +#--------------------------------------------------------------------------- + +# If the GENERATE_MAN tag is set to YES (the default) Doxygen will +# generate man pages + +GENERATE_MAN = NO + +# The MAN_OUTPUT tag is used to specify where the man pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `man' will be used as the default path. + +MAN_OUTPUT = man + +# The MAN_EXTENSION tag determines the extension that is added to +# the generated man pages (default is the subroutine's section .3) + +MAN_EXTENSION = .3 + +# If the MAN_LINKS tag is set to YES and Doxygen generates man output, +# then it will generate one additional man file for each entity +# documented in the real man page(s). These additional files +# only source the real man page, but without them the man command +# would be unable to find the correct page. The default is NO. + +MAN_LINKS = NO + +#--------------------------------------------------------------------------- +# configuration options related to the XML output +#--------------------------------------------------------------------------- + +# If the GENERATE_XML tag is set to YES Doxygen will +# generate an XML file that captures the structure of +# the code including all documentation. + +GENERATE_XML = NO + +# The XML_OUTPUT tag is used to specify where the XML pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `xml' will be used as the default path. + +XML_OUTPUT = xml + +# The XML_SCHEMA tag can be used to specify an XML schema, +# which can be used by a validating XML parser to check the +# syntax of the XML files. + +XML_SCHEMA = + +# The XML_DTD tag can be used to specify an XML DTD, +# which can be used by a validating XML parser to check the +# syntax of the XML files. + +XML_DTD = + +# If the XML_PROGRAMLISTING tag is set to YES Doxygen will +# dump the program listings (including syntax highlighting +# and cross-referencing information) to the XML output. Note that +# enabling this will significantly increase the size of the XML output. + +XML_PROGRAMLISTING = YES + +#--------------------------------------------------------------------------- +# configuration options for the AutoGen Definitions output +#--------------------------------------------------------------------------- + +# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will +# generate an AutoGen Definitions (see autogen.sf.net) file +# that captures the structure of the code including all +# documentation. Note that this feature is still experimental +# and incomplete at the moment. + +GENERATE_AUTOGEN_DEF = NO + +#--------------------------------------------------------------------------- +# configuration options related to the Perl module output +#--------------------------------------------------------------------------- + +# If the GENERATE_PERLMOD tag is set to YES Doxygen will +# generate a Perl module file that captures the structure of +# the code including all documentation. Note that this +# feature is still experimental and incomplete at the +# moment. + +GENERATE_PERLMOD = NO + +# If the PERLMOD_LATEX tag is set to YES Doxygen will generate +# the necessary Makefile rules, Perl scripts and LaTeX code to be able +# to generate PDF and DVI output from the Perl module output. + +PERLMOD_LATEX = NO + +# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be +# nicely formatted so it can be parsed by a human reader. +# This is useful +# if you want to understand what is going on. +# On the other hand, if this +# tag is set to NO the size of the Perl module output will be much smaller +# and Perl will parse it just the same. + +PERLMOD_PRETTY = YES + +# The names of the make variables in the generated doxyrules.make file +# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. +# This is useful so different doxyrules.make files included by the same +# Makefile don't overwrite each other's variables. + +PERLMOD_MAKEVAR_PREFIX = + +#--------------------------------------------------------------------------- +# Configuration options related to the preprocessor +#--------------------------------------------------------------------------- + +# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will +# evaluate all C-preprocessor directives found in the sources and include +# files. + +ENABLE_PREPROCESSING = YES + +# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro +# names in the source code. If set to NO (the default) only conditional +# compilation will be performed. Macro expansion can be done in a controlled +# way by setting EXPAND_ONLY_PREDEF to YES. + +MACRO_EXPANSION = NO + +# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES +# then the macro expansion is limited to the macros specified with the +# PREDEFINED and EXPAND_AS_DEFINED tags. + +EXPAND_ONLY_PREDEF = NO + +# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files +# in the INCLUDE_PATH (see below) will be search if a #include is found. + +SEARCH_INCLUDES = YES + +# The INCLUDE_PATH tag can be used to specify one or more directories that +# contain include files that are not input files but should be processed by +# the preprocessor. + +INCLUDE_PATH = "@top_srcdir@" + +# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard +# patterns (like *.h and *.hpp) to filter out the header-files in the +# directories. If left blank, the patterns specified with FILE_PATTERNS will +# be used. + +INCLUDE_FILE_PATTERNS = + +# The PREDEFINED tag can be used to specify one or more macro names that +# are defined before the preprocessor is started (similar to the -D option of +# gcc). The argument of the tag is a list of macros of the form: name +# or name=definition (no spaces). If the definition and the = are +# omitted =1 is assumed. To prevent a macro definition from being +# undefined via #undef or recursively expanded use the := operator +# instead of the = operator. + +PREDEFINED = + +# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then +# this tag can be used to specify a list of macro names that should be expanded. +# The macro definition that is found in the sources will be used. +# Use the PREDEFINED tag if you want to use a different macro definition. + +EXPAND_AS_DEFINED = + +# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then +# doxygen's preprocessor will remove all function-like macros that are alone +# on a line, have an all uppercase name, and do not end with a semicolon. Such +# function macros are typically used for boiler-plate code, and will confuse +# the parser if not removed. + +SKIP_FUNCTION_MACROS = YES + +#--------------------------------------------------------------------------- +# Configuration::additions related to external references +#--------------------------------------------------------------------------- + +# The TAGFILES option can be used to specify one or more tagfiles. +# Optionally an initial location of the external documentation +# can be added for each tagfile. The format of a tag file without +# this location is as follows: +# +# TAGFILES = file1 file2 ... +# Adding location for the tag files is done as follows: +# +# TAGFILES = file1=loc1 "file2 = loc2" ... +# where "loc1" and "loc2" can be relative or absolute paths or +# URLs. If a location is present for each tag, the installdox tool +# does not have to be run to correct the links. +# Note that each tag file must have a unique name +# (where the name does NOT include the path) +# If a tag file is not located in the directory in which doxygen +# is run, you must also specify the path to the tagfile here. + +TAGFILES = + +# When a file name is specified after GENERATE_TAGFILE, doxygen will create +# a tag file that is based on the input files it reads. + +GENERATE_TAGFILE = + +# If the ALLEXTERNALS tag is set to YES all external classes will be listed +# in the class index. If set to NO only the inherited external classes +# will be listed. + +ALLEXTERNALS = NO + +# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed +# in the modules index. If set to NO, only the current project's groups will +# be listed. + +EXTERNAL_GROUPS = YES + +# The PERL_PATH should be the absolute path and name of the perl script +# interpreter (i.e. the result of `which perl'). + +PERL_PATH = /usr/bin/perl + +#--------------------------------------------------------------------------- +# Configuration options related to the dot tool +#--------------------------------------------------------------------------- + +# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will +# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base +# or super classes. Setting the tag to NO turns the diagrams off. Note that +# this option is superseded by the HAVE_DOT option below. This is only a +# fallback. It is recommended to install and use dot, since it yields more +# powerful graphs. + +CLASS_DIAGRAMS = YES + +# You can define message sequence charts within doxygen comments using the \msc +# command. Doxygen will then run the mscgen tool (see +# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the +# documentation. The MSCGEN_PATH tag allows you to specify the directory where +# the mscgen tool resides. If left empty the tool is assumed to be found in the +# default search path. + +MSCGEN_PATH = + +# If set to YES, the inheritance and collaboration graphs will hide +# inheritance and usage relations if the target is undocumented +# or is not a class. + +HIDE_UNDOC_RELATIONS = NO + +# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is +# available from the path. This tool is part of Graphviz, a graph visualization +# toolkit from AT&T and Lucent Bell Labs. The other options in this section +# have no effect if this option is set to NO (the default) + +HAVE_DOT = @DOXYGEN_HAVE_DOT@ + +# By default doxygen will write a font called FreeSans.ttf to the output +# directory and reference it in all dot files that doxygen generates. This +# font does not include all possible unicode characters however, so when you need +# these (or just want a differently looking font) you can specify the font name +# using DOT_FONTNAME. You need need to make sure dot is able to find the font, +# which can be done by putting it in a standard location or by setting the +# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory +# containing the font. + +DOT_FONTNAME = FreeSans + +# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. +# The default size is 10pt. + +DOT_FONTSIZE = 10 + +# By default doxygen will tell dot to use the output directory to look for the +# FreeSans.ttf font (which doxygen will put there itself). If you specify a +# different font using DOT_FONTNAME you can set the path where dot +# can find it using this tag. + +DOT_FONTPATH = + +# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect inheritance relations. Setting this tag to YES will force the +# the CLASS_DIAGRAMS tag to NO. + +CLASS_GRAPH = YES + +# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect implementation dependencies (inheritance, containment, and +# class references variables) of the class with other documented classes. + +COLLABORATION_GRAPH = YES + +# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for groups, showing the direct groups dependencies + +GROUP_GRAPHS = YES + +# If the UML_LOOK tag is set to YES doxygen will generate inheritance and +# collaboration diagrams in a style similar to the OMG's Unified Modeling +# Language. + +UML_LOOK = YES + +# If set to YES, the inheritance and collaboration graphs will show the +# relations between templates and their instances. + +TEMPLATE_RELATIONS = NO + +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT +# tags are set to YES then doxygen will generate a graph for each documented +# file showing the direct and indirect include dependencies of the file with +# other documented files. + +INCLUDE_GRAPH = YES + +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and +# HAVE_DOT tags are set to YES then doxygen will generate a graph for each +# documented header file showing the documented files that directly or +# indirectly include this file. + +INCLUDED_BY_GRAPH = YES + +# If the CALL_GRAPH and HAVE_DOT options are set to YES then +# doxygen will generate a call dependency graph for every global function +# or class method. Note that enabling this option will significantly increase +# the time of a run. So in most cases it will be better to enable call graphs +# for selected functions only using the \callgraph command. + +CALL_GRAPH = YES + +# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then +# doxygen will generate a caller dependency graph for every global function +# or class method. Note that enabling this option will significantly increase +# the time of a run. So in most cases it will be better to enable caller +# graphs for selected functions only using the \callergraph command. + +CALLER_GRAPH = NO + +# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen +# will graphical hierarchy of all classes instead of a textual one. + +GRAPHICAL_HIERARCHY = YES + +# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# then doxygen will show the dependencies a directory has on other directories +# in a graphical way. The dependency relations are determined by the #include +# relations between the files in the directories. + +DIRECTORY_GRAPH = YES + +# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images +# generated by dot. Possible values are png, jpg, or gif +# If left blank png will be used. + +DOT_IMAGE_FORMAT = png + +# The tag DOT_PATH can be used to specify the path where the dot tool can be +# found. If left blank, it is assumed the dot tool can be found in the path. + +DOT_PATH = + +# The DOTFILE_DIRS tag can be used to specify one or more directories that +# contain dot files that are included in the documentation (see the +# \dotfile command). + +DOTFILE_DIRS = + +# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of +# nodes that will be shown in the graph. If the number of nodes in a graph +# becomes larger than this value, doxygen will truncate the graph, which is +# visualized by representing a node as a red box. Note that doxygen if the +# number of direct children of the root node in a graph is already larger than +# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note +# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. + +DOT_GRAPH_MAX_NODES = 50 + +# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the +# graphs generated by dot. A depth value of 3 means that only nodes reachable +# from the root by following a path via at most 3 edges will be shown. Nodes +# that lay further from the root node will be omitted. Note that setting this +# option to 1 or 2 may greatly reduce the computation time needed for large +# code bases. Also note that the size of a graph can be further restricted by +# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. + +MAX_DOT_GRAPH_DEPTH = 0 + +# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent +# background. This is disabled by default, because dot on Windows does not +# seem to support this out of the box. Warning: Depending on the platform used, +# enabling this option may lead to badly anti-aliased labels on the edges of +# a graph (i.e. they become hard to read). + +DOT_TRANSPARENT = YES + +# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output +# files in one run (i.e. multiple -o and -T options on the command line). This +# makes dot run faster, but since only newer versions of dot (>1.8.10) +# support this, this feature is disabled by default. + +DOT_MULTI_TARGETS = YES + +# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will +# generate a legend page explaining the meaning of the various boxes and +# arrows in the dot generated graphs. + +GENERATE_LEGEND = YES + +# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will +# remove the intermediate dot files that are used to generate +# the various graphs. + +DOT_CLEANUP = YES diff --git a/makefile.in b/makefile.in deleted file mode 100644 index 8dcd2c8..0000000 --- a/makefile.in +++ /dev/null @@ -1,63 +0,0 @@ -# @configure_input@ - -CC = @CC@ -CFLAGS = @CFLAGS@ @CPPFLAGS@ -LDFLAGS = @LDFLAGS@ -LIBS = @LIBS@ - -ifeq (@GCC@,yes) -CFLAGS += -Wall -endif - -all: teco - -OBJS = tecbuf.o teccmd.o tecdebug.o tecdisp.o tecexec.o tecmem.o teco.o tecparse.o tecstate.o tecterm.o tecundo.o - -HEADERS = teco.h tecparse.h -LIBFLAGS = -ltermcap - -teco: $(OBJS) - $(CC) $(LDFLAGS) -o teco $(OBJS) $(LIBS) - -tecbuf.o: tecbuf.c $(HEADERS) - $(CC) $(CFLAGS) -c tecbuf.c - -teccmd.o: teccmd.c $(HEADERS) - $(CC) $(CFLAGS) -c teccmd.c - -tecdebug.o: tecdebug.c $(HEADERS) - $(CC) $(CFLAGS) -c tecdebug.c - -tecdisp.o: tecdisp.c $(HEADERS) - $(CC) $(CFLAGS) -c tecdisp.c - -tecexec.o: tecexec.c $(HEADERS) - $(CC) $(CFLAGS) -c tecexec.c - -tecmem.o: tecmem.c $(HEADERS) - $(CC) $(CFLAGS) -c tecmem.c - -teco.o: teco.c $(HEADERS) - $(CC) $(CFLAGS) -c teco.c - -tecparse.o: tecparse.c $(HEADERS) - $(CC) $(CFLAGS) -c tecparse.c - -tecstate.o: tecstate.c $(HEADERS) - $(CC) $(CFLAGS) -c tecstate.c - -tecterm.o: tecterm.c $(HEADERS) - $(CC) $(CFLAGS) -c tecterm.c - -tecundo.o: tecundo.c $(HEADERS) - $(CC) $(CFLAGS) -c tecundo.c - -clean: - rm -f teco $(OBJS) - -distclean: clean - rm -f teco config.h config.log config.status - -developerclean: distclean - rm -f makefile - rm -rf autom4te.cache -- cgit v1.2.3